• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.19-28
• /
• 2008

In this paper, we implemented an intelligent home service robot system which alerts users to danger by wireless internet platforms for interoperability(WIPI) of a cellular phone. This paper discusses the three parts of the system: robot, middleware and mobile system. First, the robot consists of a gas sensor, a fire detector, ultrasonic sensors, motors, a camera and a Bluetooth module. The robot perceives various danger circumstances. Second, the middleware connects the robot and the mobile system. It monitors the robot and sends emergency notification SMS message to the user's cellular phone if in danger. Third, the mobile system sends commands which control the robot using TCP/IP protocol. The proposed scheme is to control the sensors of the robot part through Atmega 128 processor, and the robot and middleware parts will be installed in the household, and will be controled by mobile part from the outside.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.3
• /
• pp.27-38
• /
• 2017

This Paper Presents a Method for Stitching a Large Number of Images Recorded by a Large Number of Individual Users Through a Cellular Phone Camera at a Venue. In Contrast to 360 Camera Solutions that Use Existing Fixed Rigs, these Conditions must Address New Challenges Such as Time Synchronization, Repeated Transformation Matrix Calculations, and Camera Sensor Mismatch Correction. In this Paper, we Solve this Problem by Updating the Transformation Matrix Using Time Synchronization Method Using Audio, Sensor Mismatch Removal by Color Transfer Method, and Global Operation Stabilization Algorithm. Experimental Results Show that the Proposed Algorithm Shows better Performance in Terms of Computation Speed and Subjective Image Quality than that of Screen Stitching.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.817-819
• /
• 2007

A low-stress organic polymer membrane is proposed as a deformable mirror that can be incorporated into a cellular phone camera to achieve auto focusing without motor-type moving parts. It is demonstrated that our fabricated device has an optical power of 20 diopters and can switch focus in 14 ms. The surface roughness of the organic membrane is measured around 15 nm, less than ${\lambda}$/20 of the visible light. With curve fitting, we found that the actuated membrane is almost parabolic in shape, which leads to less aberration than spherical surfaces. It is suitable for reflective-optics systems.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2016

Canine cataract is developed with aging and can cause the blindness or surgical treatment if not treated timely. The first observation must be made by pet owners but they do not have proper equipment and knowledge to see the abnormalities. In this paper, we propose an intelligent image processing method to extract canine cataract suspicious object from non-professional equipment such as ordinary digital camera and cellular phone photographs so that even casual owners of pet dog can make a pre-diagnosis of such a surgery-needed disease as soon as possible. The experiment shows that the proposed method is successful in most cases except the dog has similar colored hair to the color of cataract.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.77-86
• /
• 2005

This paper is about the development of Automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, The punching accuracy is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used fur the sake of cost down instead of using high quality vision systems for the factory automation. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.981-984
• /
• 2004

This paper is about the development of Automatic FPC punching instrument. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. Test algorithm shows good results to the designed automatic punching system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.431-437
• /
• 2004

This paper propose a facial recognition method based on an ubiquitous computing that is one of next generation intelligence technology fields. The facial images are acquired by a mobile device so-called cellular phone camera. We consider a mobile security using facial feature extraction and recognition process. Facial recognition is performed by the PCA and fuzzy LDA algorithm. Applying the discrete wavelet based on multi-resolution analysis, we compress the image data for mobile system environment. Euclidean metric is applied to measure the similarity among acquired features and then obtain the recognition rate. Finally we use the mobile equipment to show the efficiency of method. From various experiments, we find that our proposed method shows better results, even though the resolution of mobile camera is lower than conventional camera.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.60-63
• /
• 2007

최근, 핸드폰은 일상생활의 필수품이 되었다. 특히 카메라가 장착된 핸드폰은 개인홍보와 오락요소로의 대표적인 도구로 사용된다. 나아가 양안카메라가 적용된 핸드폰은 사용자에게 입체감을 전달할 것이며, 입체감은 보다 효과적인 개인홍보 및 오락성을 제공할 것이다. 핸드폰은 휴대가 용이하지만 제한된 표시소자의 크기 및 해상도로 인하여 입체시 구현 시 사용자에게 손실된 정보 및 낮은 임장감을 제공한다. 이에 본 연구는 기존의 입체시 구현에 대한 구속조건들을 분석하고 핵심 요인을 산출하여, 핸드폰 환경에서의 최적의 입체시 구현을 위한 새로운 구속조건의 범위를 정량화하였다. 대표적인 구속조건으로는 수평, 수직 시차량이 고려되었다. 본 연구의 결과는 핸드폰용 양안카메라의 제작공차 및 효과적인 시차영상 제작을 위한 기준을 제시한다. 연구에 사용된 제품으로는 QVGA해상도(320*240) 및 2.8' 크기의 표시소자인 PDA폰이며, 입체시에 대한 구속조건을 정량화하기 위하여 수직, 수평이동이 가능한 지그를 사용하여 실험의 정확성을 높였다. 피실험자는 10명이며 남자 7명, 여자 3명으로 구성되었다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1091-1096
• /
• 2007

This paper describes the development of a small lens molding system for manufacturing the small lens like lens of a cellular phone, a small digital camera and so on. In order to manufacture a small lens, firstly, the raw material for lens with spherical shape should be manufactured by processing a glass, secondly, the mold inserted the raw material for lens should be heated till its molding temperature in the electric furnace, finally, the small lens is manufactured by applying the force using pressuring control system. In this paper, the small lens molding system with the function of force control and velocity control was developed. It is composed of a electric furnace and its temperature control system, a pressuring control system, a body, and so on. The temperature characteristic test of the electric furnace, and the force and velocity characteristic test of the pressuring control system were carried out. It was confirmed that the developed system had good functions for manufacturing a small lens.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.57-64
• /
• 2008

This paper describes the development of a small lens molding system for manufacturing the small lens like lens of a cellular phone, a small digital camera and so on. In order to manufacture a small lens, firstly, the raw material for lens with spherical shape should be manufactured by processing a glass material, secondly, the mold inserted the raw material for lens should be heated till its molding temperature in the electric furnace, finally, the small lens is manufactured by applying the force using pressuring control system. In this paper, the small lens molding system with the function of force control and velocity control was developed. It is composed of an electric furnace and its temperature control system, a pressuring control system, a body, and so on. The temperature characteristic test of the electric furnace, the force and velocity characteristic test of the pressuring control system were carried out. It was confirmed that the developed system had good functions for manufacturing a small lens.