• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.159-164
• /
• 2009

Purpose: The automatic notification system for alarm values on blood tests conducted by this hospital is designed to immediately inform the attending physician of the result of a blood test, to help the relevant patient to promptly receive proper treatment, and furthermore, to reduce the likelihood of a fatal influence to the patient. From 2004, the clinical pathology department of this hospital has been operating an automatic notification system for blood tests, in relation to the items of WBC, Hb, Plt, PB cell morphology, Malaria, PT, aPTT, BT, fibrinogen, Ca, K, Na, Cl, Mg, Glucose, Ketone, Digoxin, PKU, Homocystinuria, 17-OHP, Neonatal TSH, and Galactosemia. Recently, the blood test room of the nuclear medicine department has been operating an automatic notification system for the alarm values of a blood test, in relation to three items of TSH, FT4, and 17-${\alpha}$-OH-PGR, and the details of its operation will be described here. Materials and Methods: The subjects were newborn babies that were receiving TSH, FT4, and $17{\alpha}$-OH-PGR prescriptions from February $19^{th}$ to May $11^{st}$, 2009, and who met with the following criteria: N2340 Thyroid-Stimulating Hormone: >$10{\mu}IU/mL$ (Reference value: 0.4~5.0). N2360 Free-Thyroxine: <$0.8{\mu}g/dL$ (Reference value: 0.8~1.9), N2444 $17{\alpha}$-OH-Progesterone: >$30\;{\mu}g/mL$ (Reference value: Male (0.6~3.42), Female follicular phase (0.19~1.8). The automatic notification system was operated by entering test items, relevant treatment departments, and standard values for reporting alarm values into the OCS program, and then transmitting results that met with the input conditions to the PDAs of the prescription and the attending physician by SMS. Results: Reporting an alarm value of the nuclear medicine blood test, which can have a fatal influence on the lives of patients, will help cure patients, improve the quality of the test, and furthermore, will increase the patient's satisfaction with the prescription and treatment of the test.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.4
• /
• pp.329-338
• /
• 1992

This study was attempted aimed to prepare of Andong sikhe by pure culture inoculation and to improve storage stability by the addition of stabilizers to the product. Lactobacillus delbreuckii was selected for pure culture inoculation in the fermentation. The effect of stabilizers on the sedimentation, sensory evaluation and viscosity of Sikhe were investigated during the fermentation of traditional Andong Sikhe stored at $4^{\circ}C$ Morphological characteristics of Sikhe were determined by scanning electromicrograpy. Among the stabilizers added to the traditional Andong sikhe Na-alginate was found to be best stabilizers. When the product was evaluated by the sensory panel, the addition of stabilizers up to 0.1% level actually increased the acceptability of the product, while the concentration of more than 0.2% stabilizers affected the acceptability of the negatively. Sikhe added Na-carboxymethyl cellulose and Na-alginate showed highest viscosity on the 2nd day of fermentation, while homogenized Andong sikhe with Carrageenan showed the highest peak in viscosity on the first day of fermentation. Lactic acid bacterial count reached to $3.2{\times}10^8/ml$ after 20 days of storage. The surface and cross section of rice was observed by scanning electron microscope. As the fermentation proceeded holes on the surface increased, and nearly empty cell wall remained at the later stage of fermentation. Use of pure cultured inoculum of L. delbreuckii supported the rapid build up of the lactic acid bacteria and consequently the whole process of the fermentation was shortened. The acceptability and product quality were improved by use of L. delbreuckii inoculum.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.768-774
• /
• 2009

To improve the productivity of 1,3-propanediol(1,3-PD) with K. pneumoniae DSM4799 using pure glycerol and crude glycerol derived from the biodiesel process, optimizing fermentation conditions was performed by changing environmental factors such as anaerobic/aerobic condition, temperature, glycerol concentration, and pH. When anaerobic conditions were maintained, there was an improved 1,3-PD production compared with that from aerobic/anaerobic 2-stage fermentation. From the results with temperature $26{\sim}37^{\circ}C$, the higher 1,3-PD production yield was observed at $30{\sim}33^{\circ}C$. For an initial glycerol concentration higher than 60 g/L, cell growth and 1,3-PD production were inhibited. When crude glycerol was used, the initial 1,3-PD production appeared to be inhibited. After 48 hr of incubation, however, 1,3-PD production with crude glycerol was even higher than that with pure glycerol, demonstrating the feasibility of 1,3-PD production using crude glycerol as a substrate. Fed-batch fermentation was applied for the high concentration of 1,3-PD without substrate inhibition. By regulating pH at 7 during the fed-batch with glycerol lower than 40 g/L, the yield of 1,3-PD was 25% higher than that without pH regulation(0.56 g/g vs. 0.45 g/g). In conclusion, based on our results, anaerobic conditions, temperature at $30^{\circ}C$, pure or crude glycerol lower than 40 g/L, and pH regulation at 7 were the optimized conditions for 1,3-PD production using K. pneumoniae DSM4799, making it more feasible to produce 1,3-PD at higher concentration and a lower price.

• Korean Journal of Microbiology
• /
• v.52 no.4
• /
• pp.463-470
• /
• 2016

The enzymatic degradation of xylans is the most versatile way to obtain the high value-added functional compounds or the fermentable sugars for renewable energy. The endo-${\beta}$-xylanases are the major enzymes which hydrolyze the internal ${\beta}$-1,4-linkages of xylan backbones to produce the mixtures of xylooligosaccharides including xylobiose and xylotriose. Among them, glucuronoxylanase GH30 can exclusively hydrolyze the internal ${\beta}$-1,4-linkages of xylans decorated with methylglucuronic acid branches. In the present study, two xylanolytic enzyme (PaXN_10 and PaGuXN_30) genes were cloned from Paenibacillus amylolyticus KCTC 3005, and expressed in Escherichia coli, respectively. PaXN_10 (38.7 kDa) belongs to the endo-${\beta}$-xylanases GH10 family, while PaGuXN_30 (58.5 kDa) is a member of glucuronoxylanase GH30. They share the same optimal reaction conditions at $50^{\circ}C$ and pH 7.0. Enzymatic characterization proposed that P. amylolyticus can utilize the hardwood glucuronoarabinoxylans via the cooperative actions of xylanases GH10 and GH30. The extracellular PaGuXN_30 is secreted into the medium and hydrolyzes glucuronoarabinoxylans to release a series of aldouronic acid mixtures with a methylglucuronic acid branch. The resultant products being transported into the microbial cell are successively degraded into the smaller xylooligosaccharides by the intracellular PaXN_10, which will be utilized for the cellular metabolism.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.266-270
• /
• 2005

The effect of the weight ratio of carbon source to nitrogen source on the growth and the composition change of fatty acids of Thraustochytrium aureum ATCC 34304 was investigated. The cell concentration of 5 days' culture increased and then decreased according to the increase of C/N, The ratioes for the maximum biomass were unique respectively and distributed between 1 and 4 with the initial sugar concentration in the range of 5 g/L to 25 g/L. The biomass yield, $Y_{x/s}$ decreased along with the increase of C/N, but maintained a constant value 0.35 between 10 and 20. The composition of myristic acid $(C_{14:0})$, one component of the lipid synthesized by T. aureum, was not affected with the change of C/N, but the composition of palmitic acid $(C_{16:0})$ was around $20\%$ below 4 of C/N and decreased to $15\%$ according to C/N about 4. The compositions of oleic acid $(C_{18:1})$ and linoleic acid $(C_{18:2})$ increased from 0 to $20\%\;and\;7\%$ respectively. The composition of $\gamma-linoleic$ acid $(C_{18:3})$, however, reduced from $5\%\;to\;2\%$. EPA $(C_{20:5})$ and DPA $(C_{22:5})$ showed a tendency of reduction in the weight composition according to the increase of C/N, but DHA $(C_{22:6})$ had a trend maintaining an approximately constant value, around $40\%$, irrespective of the change of C/N.

• Journal of Radiation Protection and Research
• /
• v.11 no.2
• /
• pp.114-122
• /
• 1986

At present, the treatments of the radiation-induced diseases are only performing by the palliative treatment technique. Moreover, radiation protective agents are a little toxic for human being and this seriously limits their applicability with various complications in clinical uses. Accordingly, as a part of the aim of gain of the basic data for protective roles of some radioprotectors, the present investigation was carried out to evaluate the comparative radioprotective effects by the administration of DDC, MEA, WR-2721. Results are shown for statistically significant analysis and correlation with each group as follows; 1. The proper doses of the radioprotectors were DDC; 1,550 mg/kg, MEA; 450 mg/kg, WR-2721; 780 mg/kg of the mouse body weight. 2. DMF(Dose modification factor) of LD 50/10 and LD 50/30 for whole body irradiation was DDC; 1.2, MEA; 1.4, WR-2721; 1.9 and DDC; 1.7, MEA; 1.8, WR-2721; 2.5 respectively. 3. DMF for radiation reaction of jejunal crypt was DDC: 1.07, MEA: 1.21 and WR-2721: 1.76 and that of jejunal crypt cell was DDC: 1.04, MEA: 1.08 and WR-2721: 1.38 respectively. 4. Conclusively, WR-2721 was the most effective drung among the three radioprotectors and this result must be a supportive data for further study for clinical application.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.123-129
• /
• 1999

Initial electrochemical characteristics of $LiCoO_2$ electrode for lithium ion battery with various content of super s black as conductive material were evaluated through the charge/discharge with the potential range of 4.3V to 2.0V versus $Li^+/Li^+$. The rate of C/4 and C/2 by the 3 electrode test cell composed with an electrolytic solution of 1 mol/l $LiPF_6/EC+DEC(1:3\;by\; weight)$. Lithium was used as reference electrode. High impedance charge behavior was observed at early stage of charge. In the case of $3\%w/w$ of super s black as conductive material, the specific resistance of the high impedance releasing was $3.82\;{\Omega}\;{\cdot}\;g-LiCoCo_2$ at the current density of $0.5 mA/cm^2$, which corresponds 7 times of the specific resistance of electrode $(0.728 g-LiCoO_2)$. At second charge, the specific resistance of the high impedance releasing was 63 mn · g-Lico02, which corresponds 12eio of the specific resistance of electrode and only $1.7\%$ of that of the first charge. The first charge and discharge specific capacities at C/4 rate were 160-161 and $153\~155mAh/g-LiCoO_2$, respectively, to lead $95.4\~96.4\%$ of coulombic efficiencies and ca. $6 mAh/g-LiCoO_2$ of initial irreversible specific capacity. Specific resistance at the end of charge and rest showed low value at content of super s black between 2 and $7\%w/w$, which agreed with characteristics of irreversible specific capacity. Capacity densities were reduced by the increasing the content of conductive material. They were 447 and 431mAh/ml when 2 and $2.9\%w/w$ of super s black were used, respectively, at the rate of C/4.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.391-397
• /
• 2011

The use of Hydrogen as a fuel is receiving considerable attention and as a result, research on novel methods of hydrogen production is necessary so that the hydrogen demands in the future can be satisfied. This study presents experimental data on methanol Autothermal Reformation that quantifies the relationship between the oxygen-to-methanol ratio ($O_2/CH_3OH$) and reformer efficiency. For each catalyst configuration, the $O_2/CH_3OH$ was varied from 0.1 to 0.4, with an increment of 0.05, to investigate the effects of $O_2/CH_3OH$ on the reactor performance, including temperature profile, conversion, and efficiency. $O_2/CH_3OH$ was increased from 0.15 to 0.20, and the catalyst bed temperature increased by $235^{\circ}C$ to approximately $550^{\circ}C$. The catalyst bed temperature increased with increasing $O_2/CH_3OH$ as the reaction shifted from endothermic to exothermic reaction and as a result, excess heat, which raised the reactor temperature, was generated. The reactor performance was shown to be highly dependent on $O_2/CH_3OH$. The optimum $O_2/CH_3OH$ = 0.30 found in the experimental tests is 30% higher than the theoretical optimum of 0.23. This is attributed to a combination of factors such as the concentrations of the $O_2$ and $CH_3OH$ gas, reaction rate, catalyst effects, heat loss from the reactor, and the difference between the actual amounts of reaction products formed and the theoretical amounts of the reaction products.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.250-256
• /
• 2018

To determine whether metabolite fingerprinting for whole cell extracts based on Fourier transform infrared spectroscopy (FT-IR) can be used to discriminate and compare metabolic equivalence, standard medicinal parts of Cynanchum wilfordii (Maxim.) Hemsl. and their adventitious roots were subjected to FT-IR. The principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) from FT-IR spectral data showed that whole metabolic pattern from the adventitious root of Cynanchum wilfordii was highly similar to its standard medicinal parts. These results clearly showed that mass proliferation of adventitious roots could be applied for the novel supply of standard medicinal parts of medicinal plants. Furthermore, FT-IR spectroscopy combined with multivariate analysis established in this study could be applied as an alternative tool for discriminating of whole metabolic equivalence from standard medicinal parts. Thus, it is proposed that these metabolic discrimination systems from the adventitious root of Cynanchum wilfordii could be applied for metabolic standardization of in vitro grown Cynanchum wilfordii.

• Journal of Life Science
• /
• v.22 no.5
• /
• pp.575-581
• /
• 2012

This study was conducted to develop an economical optimum medium composition for the mass production of $Lactobacillus$ $plantarum$ and $Lactobacillus$ $reuteri$, livestock probiotics. Medium ingredient factors were selected on the basis of MRS broth composition, and the 15 ingredient variables were as follows: sucrose, glucose, molasses, yeast extract, corn steep liquor, soy peptone, dipotassium phosphate, manganese chloride, magnesium chloride, tween 80, sodium chloride, sodium acetate, ammonium citrate, sodium sulphate, and ferrous sulphate. The Plackett Burman design, consisting of 20 runs, was employed for the analysis of ingredient effects on cell growth of $L.$ $plantarum$ and $L.$ $reuteri$. As a result, sucrose, glucose, molasses, yeast extract, corn steep liquor, soy peptone, sodium acetate, and ammonium citrate positively influenced the growth of $L.$ $plantarum$. Additionally, yeast extract, soy peptone, $K_2PHO_4$, and tween 80 positively influenced the growth of $L.$ $reuteri$. Positive effects were found from sucrose, yeast extract, and soy peptone in the integrated analysis of the effects of both $L.$ $plantarum$ and $L.$ $reuteri$. Finally, effective medium components for both strains were found as follows: sucrose (20.0 g/l), glucose (5.0 g/l), soy peptone (11.0 g/l), yeast extract (5.0 g/l), $K_2PHO_4$ (0.2 g/l), $CH_3COONa$ (2 g/l), and $MgCl_2$ (0.02 g/l).