• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.59.1-59.1
• /
• 2010

Aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) is studied with the structure of a glass/Al/$SiO_2$/a-Si, in which the $SiO_2$ layer has micron-sized laser holes in the stack. An oxide layer between aluminum and a-Si thin films plays a significant role in the metal-induced crystallization (MIC) process determining the properties such as grain size and preferential orientation. In our case, the crystallization of a-Si is carried out only through the key hole because the $SiO_2$ layer is substantially thick enough to prevent a-Si from contacting aluminum. The crystal growth is successfully realized toward the only vertical direction, resulting a crystalline silicon grain with a size of $3{\sim}4{\mu}m$ under the hole. Lateral growth seems to be not occurred. For the AIC experiment, the glass/Al/$SiO_2$/a-Si stacks were prepared where an Al layer was deposited on glass substrate by DC sputter, $SiO_2$ and a-Si films by PECVD method, respectively. Prior to the a-Si deposition, a $30{\times}30$ micron-sized hole array with a diameter of $1{\sim}2{\mu}m$ was fabricated utilizing the femtosecond laser pulses to induce the AIC process through the key holes and the prepared workpieces were annealed in a thermal chamber for 2 hours. After heat treatment, the surface morphology, grain size, and crystal orientation of the polycrystalline silicon (pc-Si) film were evaluated by scanning electron microscope, transmission electron microscope, and energy dispersive spectrometer. In conclusion, we observed that the vertical crystal growth was occurred in the case of the crystallization of a-Si with aluminum by the MIC process in a small area. The pc-Si grain grew under the key hole up to a size of $3{\sim}4{\mu}m$ with the workpiece.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.78.2-78.2
• /
• 2010

Cu(In,Ga)Se2 (CIGS)박막태양전지는 간단한구조와 가격경쟁력 및 고효율화 가능성에 대한 기대감에 의해 많은 연구가 수행되어오고 있다. 특히 높은 흡수계수와 적절한 밴드갭, 큰 결정크기와 같은 물질의 특성들이 장점으로 작용하고 있기 때문이다. 또한 CIGS박막태양전지는 다른 태양전지에 비해 광열화가 적다는 장점도 가지고 있다. CIGS 박막은 CuInSe2내의 In 사이트에 Ga을 도핑함으로서 형성이 되는데 그때의 밴드갭은 약 1.4eV이며 이를 형성하기 위해 많은 방법들이 제안되고 있는데, CIGS박막 형성 시 가장 중요시 여겨야 될 인자는 구성원소로부터 최적화된 조성비를 찾는 것이다. 이러한 관점에서 볼때 evaporation법이나 sputtering법같은 진공방식의 공정법이 비진공방식에 비해 최적의 조성비를 찾는 것이 수월할 것으로 생각된다. selenization을 하기전에, 동시증착이나 다층박막형성을 통해 Cu-In-Se의 조합이 일반적으로 이루어진다. 어떤방법이든 Se의 부가적인 공급이 이루어지는데 시작 전구체의 조합에서 그 해법을 제시하는 것에 대한 논의가 많이 부족한 현실로서, CuInSe2의 단일전구체에 의한 박막형성과 특성평가에 대해 구체적인 논의가 필요하다. 본 실험에서는 Cu-In-Se 전구체를 CuInSe2 단일 타겟에서부터 RF 마그네트론 스퍼터링법을 이용하여 박막증착을 하여 Se의 Rapid Thermal Process(RTA)법을 통해 Se이 순차적으로 공급되었다. 이때 형성되는 박막의 태양전지 흡수층 적용을 위한 광학적, 전기적 및 구조적에 대한 논의된다. Soda lime glass(SLG)와 Corning 1737 유리를 기판으로 하여 아세톤-에탄올을 이용, 초음파세척을 실시하였다. 스퍼터 공정을 하기전에 흡착된 물분자를 제거하기 위하여 약 30분간 $120^{\circ}C$로 열을 가해주었으며, 공정을 위한 총 아르곤 가스의 양은 약 50sccm이며 이때의 공정압력은 20mtorr로 고정하였다. 우선 RF power와 기판온도에 따른 단일전구체 형성을 관찰하기 위하여 각각 30~80W, RT~$400^{\circ}C$로 변화를 주어 박막을 형성한 후 모든 sample에 대하여 $500^{\circ}C$분위기에 effusion cell을 이용하여 Se 분위기에서 결정화를 실시하였다. 샘플의 두께는 Surface profiler로 측정하였고 단면은 전자주사현미경으로 관찰되었다. 동시에 SEM이미지를 통하여 morphology와 grain size 및 EDX를 통하여 조성분석을 하였다. 밴드갭, 투과율 및 흡수계수는 UV-VIS-NIR분광분석법을 통하여 수행되었으며, 전기적 특성분석을 위해 4-point-probe와 Hall effect측정을 수행하였다. 공정변수에 따른 단일타겟으로 얻어 결정화된 CuInSe2박막의 자세한 결과와 논의에 대하여 발표한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.406-406
• /
• 2016

To get high efficiency n-type crystalline silicon solar cells, passivation is one of the key factor. Tunnel oxide (SiO2) reduce surface recombination as a passivation layer and it does not constrict the majority carrier flow. In this work, the passivation quality enhanced by different chemical solution such as HNO3, H2SO4:H2O2 and DI-water to make thin tunnel oxide layer on n-type crystalline silicon wafer and changes of characteristics by subsequent annealing process and firing process after phosphorus doped amorphous silicon (a-Si:H) deposition. The tunneling of carrier through oxide layer is checked through I-V measurement when the voltage is from -1 V to 1 V and interface state density also be calculated about $1{\times}1012cm-2eV-1$ using MIS (Metal-Insulator-Semiconductor) structure . Tunnel oxide produced by 68 wt% HNO3 for 5 min on $100^{\circ}C$, H2SO4:H2O2 for 5 min on $100^{\circ}C$ and DI-water for 60 min on $95^{\circ}C$. The oxide layer is measured thickness about 1.4~2.2 nm by spectral ellipsometry (SE) and properties as passivation layer by QSSPC (Quasi-Steady-state Photo Conductance). Tunnel oxide layer is capped with phosphorus doped amorphous silicon on both sides and additional annealing process improve lifetime from $3.25{\mu}s$ to $397{\mu}s$ and implied Voc from 544 mV to 690 mV after P-doped a-Si deposition, respectively. It will be expected that amorphous silicon is changed to poly silicon phase. Furthermore, lifetime and implied Voc were recovered by forming gas annealing (FGA) after firing process from $192{\mu}s$ to $786{\mu}s$. It is shown that the tunnel oxide layer is thermally stable.

• 공업화학
• /
• 제7권5호
• /
• pp.925-937
• /
• 1996

스팀처리된 모더나이트인 $SM_{6.5}$와 $SM_{6.5}$를 불화수소산처리한 경우($FM_a$) 그리고 $SM_{6.5}$를 불화수소산처리후 다시 스팀처리한 경우($FM_b$)인 세 형태의 변형된 모더나이트를 제조하였다. 이들 시료의 특성을 연구하였으며 고정층 반응기에서 진공가스유의 촉매 분해반응을 실시하였다. 시료의 특성은 XRF와 XPS로 평균과 표면의 원소조성을 구하였고 XRD로 단위격자 상수를 측정하였다. 그리고 질소가스의 흡/탈착에 의해 세공성을 구하였고 피리딘흡착에 의한 IR에 의해 표면의 산성질을 측정하였다. 낮은 실리카/알루미나비를 가진 $SM_{6.5}$는 산량은 많지만 세공용적중 85% 정도가 미세공이었다. $SM_{6.5}$를 불화수소산처리한 경우는 $SM_{6.5}$에 비해 산량은 감소하였지만 세공성은 우수하였다. 이 불화수소산처리된 것을 더욱 많은 중세공의 형성을 위해 다시 스팀처리한 경우는 탈알루미늄에 의해 산량은 급격히 감소하지만 미세공이 중세공으로의 전환에 의해 중세공은 급격히 발달되었다. 이들 촉매상에서 큰 분자인 진공가스유의 분해반응에 의해 얻은 전화율과 가솔린, 등유+경유 그리고 옥탄가가 높은 가지달린 방향족 화합물의 수율은 산량은 크지만 미세공 구조인 $SM_{6.5}$ 보다는 이를 불화수소산처리한 경우가 산량은 감소하였지만 세공성이 우수하여 향상되었으며 $SM_{6.5}$를 불화수소산처리한 것을 다시 스팀처리한 경우가 중세공경의 발달로 더욱 우수하였다. 이로부터 모더나이트상에서 큰 분자인 진공가스유의 분해반응은 반응물질의 세공내로 확산의 한계 때문에 세공구조의 영향이 큼을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.561-566
• /
• 2005

Polycrystalline silicon films were deposited using hot wire CVD (HWCVD). The deposition of silicon thin films was approached by the theory of charged clusters (TCC). The TCC states that thin films grow by self-assembly of charged clusters or nanoparticles that have nucleated in the gas phase during the normal thin film process. Negatively charged clusters of a few nanometer in size were captured on a transmission electron microscopy (TEM) grid and observed by TEM. The negatively charged clusters are believed to have been generated by ion-induced nucleation on negative ions, which are produced by negative surface ionization on a tungsten hot wire. The electric current on the substrate carried by the negatively charged clusters during deposition was measured to be approximately $-2{\mu}A/cm^2$. Silicon thin films were deposited at different $SiH_4$ and $H_2$ gas mixtures and filament temperatures. The crystalline volume fraction, grain size and the growth rate of the films were measured by Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The deposit ion behavior of the si1icon thin films was related to properties of the charged clusters, which were in turn controlled by the process conditions. In order to verify the effect of the charged clusters on the growth behavior, three different electric biases of -200 V, 0 V and +25 V were applied to the substrate during the process, The deposition rate at an applied bias of +25 V was greater than that at 0 V and -200 V, which means that the si1icon film deposition was the result of the deposit ion of charged clusters generated in the gas phase. The working pressures had a large effect on the growth rate dependency on the bias appled to the substrate, which indicates that pressure affects the charging ratio of neutral to negatively charged clusters. These results suggest that polycrystalline silicon thin films with high crystalline volume fraction and large grain size can be produced by control1ing the behavior of the charged clusters generated in the gas phase of a normal HWCVD reactor.

• 대한의용생체공학회:의공학회지
• /
• 제38권1호
• /
• pp.43-48
• /
• 2017

우리가 예상했던 DPNs의 지름은 약 500 nm였으며 이는 SEM과 AFM 영상, Size Distribution을 통해 기대했던 것과 유사한 크기를 가진다는 것을 확인하였다. 또한, Zeta potential은 약 $-17.8{\pm}4.4mV$으로 측정되었다. Zeta potential이 +30 mV이상이면 강한 양성을 띤다고 한다. 나노 입자의 Zeta potential이 강한 양성이면 nonspecific cellular interaction이 높아지지만 간에 의해 쉽게 제거되며, hemolytic activity가 높아지기 때문에 약물 전달을 하기에 적합하지 않은 것으로 알려져 있다. 또한 강한 음성이어도 간에 의해 제거될 확률이 높아진다. 하지만 나노 입자의 Zeta potential이 중성이거나 약한 전하를 띠면 혈액에서 제거가 잘 되지 않아 혈액에 오랫동안 남을 수 있어 약물전달에 유리하고, 약 -15 mV의 전하를 띤 입자는 tumor site에 high accumulation됨이 알려져 있다[14]. DPNs의 경우 $-17.8{\pm}4.4mV$이므로 인체에 적용하기에 적합한 것으로 판단된다. DPNs의 Encapsulation Efficiency는 약 $43.8{\pm}6.6%$로 Nano-precipitation과 같은 Bottom-up 방식보다 낮은 수치를 나타내었지만, 독성이 강한 Salinomycin을 사용함으로써 이를 해결할 수 있을 것으로 생각되며 적은 양의 약물만으로 항암효과를 나타낼 수 있을 것으로 기대된다. 암세포와 함께 배양했을 때 형광 현미경으로 확인해본 결과 암세포 주변에 나노 입자가 이동한 것으로 보아 Targeting ligand나 Peptide, Aptamer를 이용하면 더욱 정확한 암세포 표적화를 이룰 수 있을 것으로 예상된다[15]. DPNs의 Drug Carrier로서의 평가는 Loading Amount와 Drug Releasing Profile을 통해 추가로 검증을 할 예정이며, Cell viability를 실행하여 DPNs의 In vitro 항암 효과를 확인하고 In vivo 실험을 진행할 예정이다.

• 전기화학회지
• /
• 제10권3호
• /
• pp.213-218
• /
• 2007

리튬/유황 전지에 적합한 전해질을 조사하기 위하여, 여러 종류의 글라임(glyme)계 가소제를 넣은 폴리비닐리덴플로라이드(poly(vinylidene fluoride):PVdF) 겔 고분자 전해질을 제조하여 전기화학적 특성을 실험하였다. 가소제는 에틸렌옥사이드(ethylene oxide; EO) 구조를 가지는 glyme계 유기용매 중에서, EO의 체인 길이가 다른 트리글라임(triglyme), 테트라글라임(tetraglyme), 폴리글라임(polyglyme (Mn=250, 500))의 네 종류를 사용하였다. 가소제 내의 EO의 체인 길이가 길어질수록 PVdF 겔 고분자 전해질의 이온전도도는 감소하였다. PVdF 겔 고분자 전해질의 가소제로 triglyme을 사용한 경우의 이온전도도가 $5.38{\times}10^{-4}\;S/cm$로 가장 높았으며, polyglyme(Mn=500)를 사용한 경우에는 $2.80{\times}10^{-4}\;S/cm$으로 가장 낮았다. 그러나 계면저항은 tetraglyme을 사용한 경우에 가장 낮게 나타났으며, 이 전해질을 리튬/유황 전지에 적용하였을 때 1232 mAh/g-S(이론용량의 70%)의 높은 초기 방전 용량을 나타내었다.

• Clinical and Experimental Reproductive Medicine
• /
• 제29권1호
• /
• pp.13-20
• /
• 2002

Objective: This study was carried out to establish the effectiveness of the vitrification method and the optimal cryoprotectants in the cryopreservation of human embryonic stem cells (ESC). Materials and Methods: Human ESC clumps established at Seoul National University Hospital (SNUhES 1) were cryopreserved with the vitrification method using the EM grid. EDS and EFS40 were used as vitrification solutions. Results: Between the EDS and EFS40 groups, there was no significant difference in the recovery rate after cryopreservation of human ESC. The formation rates of ESC colonies in the vitrified groups were significantly lower than those in the control ESC group (p<0.05, p<0.05). In addition, the formation rate of ESC colonies in the EDS group was significantly higher than that in the EFS40 group (p<0.05). The ESC colonies in the vitrified groups were significantly smaller after culture duration of 2 and 4 days, respectively, compared with the control ESC group (p<0.1, p<0.05). However, these effects could be reduced to nonsignificant level by the additional culture of ESC colonies. The vitrified human ESC retained the properties of pluripotent cells, including the expression of cell surface. markers for the undifferentiated cells such as alkaline phosphatase and SSEA-4 (stage-specific embryonic antigen-4), and the expression of transcription factor Oct-4 (octamer-binding transcription factor-4), and the normal karyotype. Conclusion: The vitrification method using the EM grid and EDS solution was confirmed to be very effective for the cryopreservation of human ESC.

• 동의생리병리학회지
• /
• 제30권1호
• /
• pp.27-32
• /
• 2016

Streptococcus mutans plays a virtal role in trigering dental caries establishment due to its ability to synthesize two significant factors. The two factors are organic acids and glucans. The former demineralized dental enamel and the latter mediates the attachment of bacteria to tooth surface. It is believed that demineralization of dental enamel and attachment of bacteria are the crucial events that indicate and develop dental caries. For this reason, we studied the effect of the ethanol extracts of Radix Pulsatillae on the growth and acid production of S. mutans. Ethanol extracts of the Radix Pulsatillae showed concentration dependent inhibitory activity against the growth and acid production of S. mutans, and produced significant inhibition compared to the control groups (p<0.05). The extracts inhibited S. mutans adherence to hydroxyapatite treated with saliva, and cell adherence was repressed by Radix Pulsatillae. the ethanol extract of Radix Pulsatillae showed remarkable inhibition of glucosyltransferase, which synthesizes water insoluble glucan form sucrose. Phytochemical analysis showed Radix Pulsatillae contained major components such as phenolic compounds, glycosides, steroids, terpenoid, and saponin. These results suggest that Radix Pulsatillae may have anti-cariogenic properties, which may be related with major components such as phenolic compounds, glycosides, steroids, terpenoid, and saponin.

• Journal of Pharmaceutical Investigation
• /
• 제38권1호
• /
• pp.15-21
• /
• 2008

Liposomes as one of the efficient drug carriers have some shortcomings such as their short circulation time, fast clearance from human body by reticuloendothelial system (RES) and limited intracellular uptake to target cell. In this study, polyethylenglycol (PEG)-incorporated cationic liposomes were prepared by ionic complexation of positively charged liposomes with carboxylated polyethyleneglycol (mPEG-COOH). The cationic liposomes had approximately $98.6{\pm}1.0nm$ of mean particle diameter and $42.8{\pm}0.8mV$ of zeta potential value. The PEG-incorporated cationic liposomes had $110.1{\pm}1.2nm$ of mean particle diameter with an increase of about 10 nm compared to the cationic liposomes. Zeta potential value of them was $12.9{\pm}0.6mV$ indicating 30mV decrease of cationic charge compared to the cationic liposomes. The amount of PEG which was incorporated onto the cationic liposomes was assayed by using picrate assay method and the incorporation efficiency was $58.4{\pm}1.1%$. Loading efficiency of model drug, doxorubicin, into cationic liposomes or PEG-incorporated cationic liposomes was about $96.0{\pm}0.7%$. Results of intracellular uptake which were evaluated by flow cytometry analysis of doxorubicin loaded liposomes showed that intracellular uptake of PEG-incorporated cationic liposomes was higher than the cationic liposomes or DSPE-mPEG liposomes. In addition, cytotoxicity of PEG-incorporated cationic liposomes was comparable to cationic liposomes. Consequently, the PEG-incorporated cationic liposomes of which surface was incorporated with PEG by ionic complex may be applicable as anticancer drug carriers that can increase therapeutic efficacy.