• 한국표면공학회지
• /
• 제40권3호
• /
• pp.138-143
• /
• 2007

The effects of texturing and anti-reflection coating on the reflection properties of multi-crystalline silicon solar cell have been investigated. The chemical solutions of alkaline and acidic etching solutions were used for texturing at the surface of multi-crystalline Si wafer. Experiments were performed with various temperature and time conditions in order to determine the optimized etching condition. Alkaline etching solution was found inadequate to the texturing of multi-crystalline Si due to its high reflectance of about 25%. The reflectance of Si wafer texturing with acidic etching solution showed a very low reflectance about 10%, which was attributed to the formation of homogeneous. Also, deposition of ITO anti-reflection coating reduced the reflectance of multi-crystalline si etched with acidic solution($HF+HNO_3$) to 2.6%.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.9-18
• /
• 2011

In this study the optimal volume for non-point source control retention is estimated considering spatio-temporal variation of land surface. The 3-parameter mixed exponential probability density function is used to represent the statistical properties of rainfall events, and NRCS-CN method is applied as rainfall-runoff transformation. The catchment drainage area is divided into individual $30m{\times}30m$ cells, and runoff curve number is estimated at each cell. Using the derived probability density function theory, the stormwater probability density function at each cell is derived from the rainfall probability density function and NRCS-CN rainfall-runoff transformation. Considering the antecedent soil moisture condition at each cell and the spatial variation of CN value at the whole catchment drainage area, the ensemble stormwater capture curve is established to estimate the optimal volume for an non-point source control retention. The comparison between spatio-temporally varied land surface and constant land surface is presented as a case study for a urban drainage area.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.128-132
• /
• 2021

본 논문에서는 표면 Texturing 방법 중 습식 에칭법을 이용하여 태양전지에 사용되는 전극의 표면을 거칠게 처리하였고, 표면 처리 후 TiO2 산화물 반도체를 사용한 염료 감응 태양전지를 제작하였다. 표면 처리된 전극을 에칭 시간에 따른 분광특성을 측정 분석하였으며, 에칭 시간에 따라 제작한 TiO2 염료 감응 태양전지의 전기적 특성을 평가함으로써 표면 처리에 따른 태양전지의 효율 향상에 관한 연구를 진행하였다. 결과적으로 전극 표면을 10분간 에칭 처리한 태양전지의 경우 기존 효율과 비교하였을 때, 약 27.46[%] 개선됨을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제41권4호
• /
• pp.296-303
• /
• 2016

Objectives: The purpose of the present study was to evaluate the effects of proanthocyanidin (PAC), a crosslinking agent, on the physical properties of a collagen hydrogel and the behavior of human periodontal ligament cells (hPDLCs) cultured in the scaffold. Materials and Methods: Viability of hPDLCs treated with PAC was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The physical properties of PAC treated collagen hydrogel scaffold were evaluated by the measurement of setting time, surface roughness, and differential scanning calorimetry (DSC). The behavior of the hPDLCs in the collagen scaffold was evaluated by cell morphology observation and cell numbers counting. Results: The setting time of the collagen scaffold was shortened in the presence of PAC (p < 0.05). The surface roughness of the PAC-treated collagen was higher compared to the untreated control group (p < 0.05). The thermogram of the crosslinked collagen exhibited a higher endothermic peak compared to the uncrosslinked one. Cells in the PAC-treated collagen were observed to attach in closer proximity to one another with more cytoplasmic extensions compared to cells in the untreated control group. The number of cells cultured in the PAC-treated collagen scaffolds was significantly increased compared to the untreated control (p < 0.05). Conclusions: Our results showed that PAC enhanced the physical properties of the collagen scaffold. Furthermore, the proliferation of hPDLCs cultured in the collagen scaffold crosslinked with PAC was facilitated. Conclusively, the application of PAC to the collagen scaffold may be beneficial for engineering-based periodontal ligament regeneration in delayed replantation.

• 신재생에너지
• /
• 제5권3호
• /
• pp.22-25
• /
• 2009

For increasing the output voltage, six SMD(surface mount device) type AlGaAs/GaAs solar cells were connected in series. The electrical properties of the array were measured and compared with one sun (100 mW/$cm^2$) and indoor light (480 lux) conditions. Under one sun condition, output power was 21.57 mW and it was $14.67\;{\mu}W$ under indoor light condition. Under the indoor light condition, the intensity of the light is very low compared to one sun condition. Thus the Voc(open circuit voltage) and Isc (short circuit current) of the sample under indoor light condition decreased very much compared to that of under the one sun condition. This kind of solar cell power supply can be used as a power source for ubiquitous sensor network (USN).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.97-97
• /
• 2014

The properties of thin film solar cells based on electrodeposited $CuIn(Se,S)_2$ were investigated. The proposed solar cell fabrication method involves a single-step $CuInSe_2$ thin film electrodeposition followed by sulfurization in a tube furnace to form a $CuIn(Se,S)_2$ quaternary phase. A sulfurization temperature of $450-550^{\circ}C$ significantly affected the performance of the $CuIn(Se,S)_2$ thin film solar cell in addition to its composition, grain size and bandgap. Sulfur(S) substituted for selenium(Se) at increasing rates with higher sulfurization temperature, which resulted in an increase in overall band gap of the $CuIn(Se,S)_2$ thin film. The highest conversion efficiency of 3.12% under airmass(AM) 1.5 illumination was obtained from the $500^{\circ}C$-sulfurized solar cell. The highest External Quantum Efficiency(EQE) was also observed at the sulfurization temperature of $500^{\circ}C$.

• 대한전기학회논문지
• /
• 제40권9호
• /
• pp.883-892
• /
• 1991

This paper presnets the characteristics of electropolymerization and electrochemicla propoerties of polyaniline(PAn). From the morphology study on the PAn surface, it seems that coagulation of the fibrils on the surface proceeds as the PAn grows, resulting in fibril clusters with new branches and more extensive voids. While PAn/Li cell is cycled at potential range between 2.9V and 3.7V in which the first strong reduction peak of 2.75V does not appear, its oxidation reduction capacities were increased up to about tenth cycle. Electricity efficiency of stable charge-discharge to deep discharge in PAn/Li cell was 42.9%. Average charge potential, avergae discharge potential, energy density, and charge-discharge energy efficiency of the PAn/Li cell were 3.4V, 3.25V, 132.9Wh/kg, and 95.6%, respectively.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.5-9
• /
• 2010

Recently, the important issues of solar cell are low cost and high efficiency. Making low cost and high efficiency solar cell, there are many effects to development of inexpensive wafer, simplify process and improve optical, electrical properties. In this the study, the 2 step texturing method using micro blaster was developed to decrease reflection of incident lights. Air bridge electrode structure is suggested to expand the effective surface area and decrease the series resistance of finger electrode. The effects of 1 step texturing and 2 step texturing by micro blaster are compared. Reflectance of 1 step and 2 step texturing are measured 28.7% and 25.5%, respectively. The reflectance of 2 step texturing sample is lower about 3.2% than 1 step textured sample.

• 융합정보논문지
• /
• 제10권6호
• /
• pp.164-176
• /
• 2020

인체 적응 면역 반응을 일으키는데 중요한 항원 특이적 T 세포를 활용한 면역 세포 치료에서 T 세포를 체외에서 배양하고 클론 확장시키는 과정은 매우 섬세하고 복잡하여 조절하기가 쉽지 않아 T 세포의 활성화와 클론 확장을 유도하면서도 조절 및 취급이 용이한 인공 항원제시세포 개발의 필요성이 대두되고 있다. 인공 항원제시세포는 인체의 항원제시세포의 세포 표면 분자와 작용을 모방하게 되는데, 기본적인 신호 분자인 MHC-항원 복합체, 공동 자극 분자, 그리고 용해성 면역 조절 분자를 필수적으로 발현하여야 한다. 또한 T 세포가 항원과 접촉할 때, 이들 분자들이 잘 조직화되어 작용하는 것이 효과적인 T 세포 활성화에 중요하다. 본 논문에서는 여러 인공 항원제시세포 제작 방법과 세포 표면 분자들의 결합 방법과 물리적인 특성이 T 세포와의 상호작용에 중요함을 고찰하였으며, 효과적인 T 세포 활성화를 유도하며 면역세포치료에 적용 가능한 인공항원제세세포의 제작 방법을 살펴보았다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3093-3098
• /
• 2010

The core-shell $SnO_2$@AO (A=Ni, Cu, Zn and Mg) films were prepared and the effects of coatings on photovoltaic properties were investigated. Studies on X-ray photoelectron spectroscopy, energy dispersive X-ray analysis and transmission electron microscopy showed the formation of divalent oxides on the surface of $SnO_2$ nanoparticles. It was commonly observed that all the dye-sensitized core-shell films exhibited higher photovoltage than the bare $SnO_2$ film. Transient photovoltage measurements confirmed that the improved photovoltages were related to the decreased time constants for electron recombination.