• 제목/요약/키워드: Cell performances

검색결과 436건 처리시간 0.042초

태양전지 가상 구현 모듈의 직$\cdot$병렬 특성 해석 및 제어 (Analysis and Control of Series$\cdot$Shunt Characteristics for Virtual Implementation of Solar Cell Module)

  • 한정만;류태규;유재현;고재석;최규하
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 전력전자학술대회 논문집
    • /
    • pp.72-75
    • /
    • 2001
  • The solar energy is purity and infinity. Solar power converter were used to convert the electrical energy from the solar arrays to a stable and reliable power source. So much country research this solar energy system. The photovoltaic system is construct many solar cell array, In this paper, new implementation solar system was showed buck converter that V-I curve produced. This system can be used to study the short-term and long-term performances of solar cell and efficiency. This system is a far more cost effective and reliable replacement for field and outdoor flight testing. Study of buck converter, analysis and control shun t$\cdot$series connection characteristics of solar cell array.

  • PDF

무선 ATM 망의 역방향 핸드오버에서 경로 재설정 방식에 따른 성능 비교 (Performance Comparison of Path Reestablishment Schemes for a Backward Handover in Wireless ATM Networks)

  • 전협우;김도현
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.119-122
    • /
    • 1998
  • Wireless ATM(WATM) intends to provide a broad range of mobile multimedia services through wireless access by mobility extensions from the fixed ATM-based network. Recently, there have been active researches about new handover techniques to support terminal mobility in WATM. In this paper we classify path reestablishment schemes into full reestablishment, path rerouting with a static COS, path rerouting with a dynamic COS, and path extension. For a backward lossy handover procedure, we analyze and compare the performances of path reestablishment schemes in terms of delay, service disruption time and cell loss.

  • PDF

원형 용융탄산염 단위 연료전지의 성능과 온도분포 (The Performances and Temperature Distributions of the Circular Molten Carbonate Unit Fuel Cell)

  • 김미현;정귀영;남석우;오인환;임태훈;홍성안
    • 에너지공학
    • /
    • 제8권1호
    • /
    • pp.7-13
    • /
    • 1999
  • 원형 용융탄산염 단위 연료전지의 성능 및 온도분포가 수치모사를 통해 얻어졌다. 원형 단위전지내에서는 사각형 단위전지에 비해 비교적 균일한 온도분포가 얻어졌다. 전지의 바깥쪽으로 갈수록 가스전환율이 커졌고 전류밀도도 크게 증가하였다. 운전전압이 감소할수록 각 가스들의 전환율은 커지고 전류밀도도 커졌다. 원형 전지에서의 평균전류밀도나 출력은 전압이 높을 때는 사각형 전지보다 작았고, 전압이 낮을 때는 더 컸다. 음극 및 양극 가스의 전환율도 마찬가지였다. 전압이 낮을 때 가스의 전환율이 커서 원형 전지의 효용성이 크게 나타났다.

  • PDF

IS-95 시스템과 3GPP 시스템에서의 소프트 핸드오버의 성능 비교 (Performance Comparison of Soft Handover in IS-95 System and 3GPP System)

  • 이상천;이진오;조준만;오태원
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
    • /
    • pp.293-296
    • /
    • 2001
  • In this paper, we investigate two soft handover algorithms used in the different mobile communication system. These different systems are IS-95 system and 3GPP system. The performances of two different soft handover are compared under similar conditions in terms of propagation, environment and mobility behavior. For performance comparison of soft handover, we model cell environment, radio channel and mobility. With these models the computer simulation are performed and the result of computer simulation are reported.

  • PDF

Liquid crystal alignment on the inkjet printed polyimide by using new alignment method

  • Hwang, J.Y.;Wonderly, H.;Chien, L.C.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.506-508
    • /
    • 2007
  • We studied the nematic liquid crystal (NLC) alignment capability with a new alignment method utilizing an inkjet printed polyimide (PI) layer. A good, uniform LC alignment was achieved by the good PI printing using a new alignment method. The pretilt angle generated on the printed PI layer using the alignment method was almost the same as that on printed PI layer using rubbing alignment method. In addition, the good electro-optical performances of the new aligned twisted nematic (TN) cell with printed PI surface was obtained

  • PDF

Interlayers of polymer tandem solar cells

  • 김태희;김경곤
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.318-318
    • /
    • 2010
  • We present the effect of interlayers of polymer tandem solar cells on their photovoltaic performance. P-type and n-type interlayers are essential for the series-connection of the subcells and enable to form the tandem cell architecture by the solution processing. In this study, we use PEDOT:PSS, nanocrystalline $TiO_2$, and blends of semiconducting polymers and fullerene derivatives as a hole transporting layer, electron transporting layer, and photoactive layers, respectively. We show that photovoltaic performances of polymer tandem solar cells depending on various PEDOT:PSS layers with the different electric conductivity and the various $TiO_2$ layer thickness.

  • PDF

Performance Analysis and Evaluation of Deployment in Small Cell Networks

  • Zheng, Kan;Li, Yue;Zhang, Yingkai;Jiang, Zheng;Long, Hang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권3호
    • /
    • pp.886-900
    • /
    • 2015
  • Small cells are deployed in Heterogeneous Networks (HetNet) to improve overall performance. These access points can provide high-rate mobile services at hotspots to users. In a Small Cell Network (SCN), the good deployment of small cells can guarantee the performance of users on the basis of average and cell edge spectrum efficiency. In this paper, the performance of small cell deployment is analyzed by using system-level simulations. The positions of small cells can be adjusted according to the deployment radius and angle. Moreover, different Inter-Cell Interference Coordination (ICIC) techniques are also studied, which can be implemented either in time domain or in frequency domain. The network performances are evaluated under different ICIC techniques when the locations of Small evolved Nodes (SeNBs) vary. Simulation results show that the average throughput and cell edge throughput can be greatly improved when small cells are properly deployed with the certain deployment radius and angle. Meanwhile, how to optimally configure the parameters to achieve the potential of the deployment is discussed when applying different ICIC techniques.

Design of A CMOS Analog Multiplier using Gilbert Cell

  • Lee, Geun-Ho;Park, Hyun-Seung;Yu, Young-Gyu;Kim, Tae-Pyung;Kim, Jae-Young;Kim, Dong-Yong
    • The Journal of the Acoustical Society of Korea
    • /
    • 제18권3E호
    • /
    • pp.44-48
    • /
    • 1999
  • The CMOS four-quadrant analog multiplier for low-voltage low-power applications are presented in this thesis. The circuit approach is based on the characteristic of the LV (Low-Voltage) composite transistor which is one of the useful analog building block. SPICE simulations are carried out to examine the performances of the designed multiplier. Simulation results are obtained by 0.6㎛ CMOS parameters with 2V power supply. The basic configuration of the multiplier is the CMOS Gilbert cell with two LV composite transistors. The linear input range of the multiplier is over ±0.4V with a linearity error of less than 1.3%. The measured -3dB bandwidth is 288MHz and the power dissipation is 255 ㎼.

  • PDF

SOFC 시스템용 디젤 자열개질기 운전을 위한 기초 연구 (Experimental study on operation of diesel autothermal reformer for SOFC system)

  • 윤상호;강인용;배중면
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2015-2020
    • /
    • 2007
  • Diesel is an excellent candidate fuel for fuel cell applications due to its high hydrogen density and well-established infrastructure. But, it is hard to guarantee desirable performance of diesel reformer because diesel reforming has several problems such as sulfur poisoning of catalyst and carbon deposition. We have been focusing on diesel autothermal reforming(ATR) for substantial period. It is reported that ATR of diesel has several technical advantages such as relatively high efficiency and fuel conversion compared to steam reforming(SR) and partial oxidation(POX). In this paper, we investigate characteristics of diesel reforming under various ratios of reactants(oxygen to carbon ratio, steam to carbon ratio) for improvement of reforming performances(high reforming efficiency, high fuel conversion, low carbon deposition). We also exhibit calculated heat balance of autothermal reformer at each condition to help thermal management of SOFC system.

  • PDF

Virtual Scheduling Algorithm의 VLSI 구현 (VLSI-Implementation of the Virtual Scheduling Algorithm)

  • 전만영;박홍식
    • 한국통신학회논문지
    • /
    • 제21권1호
    • /
    • pp.144-154
    • /
    • 1996
  • Proposed numerous algorithms for the policing function have mainly focused on their performances. Besides their performance evaluation, however, the VLSI-implementation of these algorithms is worth consideration as well. Although, no algorithms for the policing function have been standardized up to now, ITU-T I.371 suggests two examples of algorithms, the Virtual Scheduling Algorithm (VSA) and the Continuous State Leaky Bucket algorithm. In this paper, we suggest the architecture of a policing device implementing the VSA among various algorithms for the peak cell rate policing and discuss some issues on the implementation. We also present how to select the policing modes of the two devices used to realize various policing schemes and show the experimental results obtained under four different peak cell rate values to confirm that the device performs the policing function satisfactorily. We exploit the priority encoder to run the algorithm in parallel instead of sequentially, which reduces the operation time to a great extent.

  • PDF