• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.632-637
• /
• 2015

Mesoporous $TiO_2$ granules were prepared by spray pyrolysis using nano-sized titania particles which were synthesized by a hydrothermal method, and they were evaluated as the photoanode of dye-sensitized solar cells. To enhance the cell efficiency, nanoparticles within granules were chemically interconnected by adding titanium ethoxide (TEOT) to colloidal spray solution. The resulting titania particles had anatase phase without forming rutile. $TiO_2$ granules obtained showed about 400 nm in size, the specific surface area of $74-77m^2/g$, and average pore size of 13-17 nm. The chemical modification of $TiO_2$ granules by adding TEOT initially to the colloidal spray solution was proved to be an effective way in terms of increasing both the light scattering within photoanode and the lifetimes of photo-excited electrons. Consequently, the light-harvesting efficiency of TEOT-modified granules (${\eta}=6.72%$) was enhanced about 14% higher than primitive nanoparticles.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.911_912
• /
• 2009

최근 화석에너지원의 고갈과 고유가 및 지구 온난화 방지를 위해 국가별로 이산화탄소 배출량을 규제하기 시작하면서 신재생 에너지의 계통연계 시스템에 대한 관심이 높아지고 있다. 그 중 연료전지가 한 부분을 차지하고 있으며, 연료전지는 친환경적이고 효율적인 에너지원으로서 근 미래의 새로운 대체 에너지로서 각광 받으며 여러 분야의 전기장치로 사용될 수 있다. 연료전지는 낮은 출력전압과 높은 출력전류를 갖는 특징이 있으며 부하에 따라 출력전압이 변화하는 특성이 있기 때문에 연료전지의 계통연계를 위해서는 다양한 부하조건에서 연료전지와 연동된 승압형 컨버터의 제작이 반드시 필요하다. 본 논문에서는 연료전지의 계통연계를 위한 고효율 DC-DC컨버터를 제안하였고, 1.2kW용량의 연료전지 스택(Stack)과 연계한 실험을 통하여 그 유용성을 입증하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1512-1518
• /
• 2009

Recently, new dispersed power sources such as photovoltaics, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy. This paper deals with the optimal countermeasures for the mal-function of protective devices at primary feeder in distribution systems when new power sources like photovoltaic (PV) systems are interconnected, based on the symmetrical components of short circuit studies. When new power sources are considered to be interconnected to distribution systems, bi-directional power flow and interconnection transformer connection of new power sources may cause the operation problems of protective devices (mainly re-closer), since new power sources can change typical characteristics of distribution systems. Therefore, this paper shows an analysis skill of the mal-functional mechanism of protective relay and proposes the optimal solution for the mal-function problem using the symmetrical components of fault analysis. And, this paper also shows the effectiveness of proposed method by the simulation at the field distribution systems.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.12-16
• /
• 2015

In this paper, we introduce a wireless package system based on the amateur radio HR(HAM Radio) and satellite communication as a novel wireless disaster communication system and have configured a interference scenario receiving interference from adjacent base stations and D2D groups in the disaster network. In such interference scenarios, we propose a frequency re-allocation method to avoid interference and communicate with disaster networks by securing the channel capacity required between D2D terminals. As a result of computer simulation, we can find the proposed method has improved BED performance of a gain of 1.5dB and overall system throughput than conventional methods.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.1-9
• /
• 2013

Recently flexible electronic devices have attracted a great deal of attention because of new application possibilities including flexible display, flexible memory, flexible solar cell and flexible sensor. In particular, development of flexible memory is essential to complete the flexible integrated systems such as flexible smart phone and wearable computer. Research of flexible memory has primarily focused on organic-based materials. However, organic flexible memory has still several disadvantages, including lower electrical performance and long-term reliability. Therefore, emerging research in flexible electronics seeks to develop flexible and stretchable technologies that offer the high performance of conventional wafer-based devices as well as superior flexibility. Development of flexible memory with inorganic silicon materials is based on the design principle that any material, in sufficiently thin form, is flexible and bendable since the bending strain is directly proportional to thickness. This article reviews progress in recent technologies for flexible memory and flexible electronics with inorganic silicon materials, including transfer printing technology, wavy or serpentine interconnection structure for reducing strain, and wafer thinning technology.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.414-418
• /
• 2012

In recent years, understanding the dynamics of DC distribution system has become critically important due mainly to the increasing needs for the interconnection of DC distributed generators and the (DC-based) electric vehicle (EV) charging systems. In this paper, the characteristics of the DC grid system connected to the compact proton exchange membrane fuel cell (PEMFC) has been studied. In particular, the voltage and current transient phenomena were measured by varying the load of the DC grid system. Also, the voltage and current ripple were measured at the different load conditions. Our experimental results clearly manifested that the study contributes to the establishment of fundamental method to characterize the small DC grid system including distributed generation.

• Applied Microscopy
• /
• v.9 no.1
• /
• pp.1-11
• /
• 1979

Electron microscopic studies were carried out to investigate the fine structure of ommatidia of the compound eyes in Meimuna mongolica D. The crystalline cone appears round, and is composed of four double-membraned cone cells and surrounded by pigment cells having many pigment granules. The rhabdom is a closed type, and is composed of four rhabdomeres Its cross section reveals lamellated microvilli which are oriented in four different directions suggesting that these represent four photoreceptive sites. The microvilli, in a cross sectional view, are hexagonal in shape with a central axis inside. There are usually eight retinular cells arranged radially from the rhabdom, but in some retinular layers seven or nine retinular cells could be observed. The cytoplasm of each retinular cell is interconnected with that of microvilli of the rhabdomere, but the appearance of this interconnection varies depending on the number of retinular cells.'The retinlilar cells neighboring the microvilli seem to have well-developed perirhabdomal vacuoles and mitochondria as well as pigment granules surrounding these vacuoles.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.485-492
• /
• 2003

This paper presents a new modified input buffered switch, which called a grouped input buffered (GIB) switch, to eliminate the influence of HOL blocking when using multiple input buffers in ATM switches. The GIB switch consists of grouped sub switches per a network stage. The switch gives extra paths and buffered switching elements between groups for transferring the blocked cells. As the result, the proposed model can reduce the effect by the HOL blocking and thereafter it enhances the performance of the switch. The simulation results show that the proposed scheme has good performance in comparison with previous works by using the parameters such as throughput, cell loss, delay and system power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.321-322
• /
• 2007

In order to increase the cost effectiveness of solar cells, module production should be treated more comprehensively. Back contact cells offer distinct advantage in the interconnection of cells to modules. Thereby Mo thin film were prepared in order to clarify optimum conditions for growth of the thin film depending upon process, and then by changing a number of deposition conditions and substrate temperature conditions variously, structural and electrical characteristics were measured. For the manufacture of the Mo were vapor-deposited in the named order. Among them, Mo were vapor-deposited by using the sputtering method in consideration of their adhesive force to the substrate, and the DC power was controlled so that the composition of Mo, while the surface temperature having an effect on the quality of the thin film was changed from R.T$[^{\circ}C]$ to $200[^{\circ}C]$ at intervals of $50[^{\circ}C]$. Micro-structural studies were carried out by XRD (D/MAX-1200, Rigaku Co.) and SEM (JSM-5400, Jeol Co.). Electrical properties were measured by CMT-SR3000 Measurement System.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.1
• /
• pp.17-24
• /
• 2021

In this study, the potential toxicity of isoprocarb was demonstrated using zebrafish embryos. We treated isoprocarb (0, 29, and 58 mg/L) to the zebrafish embryos for 72 h then, we estimated morphological changes and apoptotic cell numbers. The increasing extent of apoptosis from the anterior to posterior region of developing zebrafish larvae was correlated with toxicity in the overall development process, including growth and normal organ formation. The appearance of abnormalities in the isoprocarb-treated groups in comparison to normal developing zebrafish larvae was verified using quantitative image analysis based on ImageJ software program. The vascular system comprising a complex interconnection of blood vessels was visualized in vessel-fluorescent transgenic zebrafish (fli1:eGFP). The main vasculature was malformed on isoprocarb treatment, and this was also related to cardiac defects. Taken together, normal embryonic development in zebrafish was interrupted owing to the acute toxicity of isoprocarb.