• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.853-854
• /
• 2001

The purpose of the present study is to find the optimal growth condition of Crypthecodinium cohnii. Using a design of experiments, it was found that the yeast extract was the most significant factor for cell growth. The effect of glucose was less than that of yeast extract and the effect of NaCl was negligible. The highest cell density, 1O.96g/L was obtained at the concentration of yeast extract 7.5g/L.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.96.1-96.1
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.192-194
• /
• 2003

In this paper, we present a 2-Dimensional simulation model of the discharge in an ac plasma display panel cell. Therefore, we study a ramp reset waveform in an ac plasma display panel discharge cell using 2-Dimensional simulation. Finally We research a connection between priming particles' density and stability.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.143-148
• /
• 1996

Detailed analyses have been presentd for a basic single-electron-logic-cell consisting of two single-electron-transistors (SETs) in series. The interconnection between two SETs has been treated as a coulomb island and the joint probability density function of all three coulomb islands (two from the SETs and one form the interconnection) has been exactly calculated. The average number of electrons in each coulomb island and the steady-state ouptut voltage have been calculated and analyzed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.933-935
• /
• 2010

VANET 은 ITS 구축에 필수적인 기술로 주변 교통 시스템 환경을 고려한 라우팅 프로토콜이 요구된다. 본 논문에서는 도시 기반의 VANET 환경에서 차량 간의 안정적이고 빠른 통신을 위하여 차량 밀도를 이용한 라우팅 기법을 제안한다. 제안하는 라우팅 기법에서는 하나의 도로를 여러 개의 cell 들로 나누고 차량들은 비콘 메시지와 cell 정보를 이용하여 차량 밀도를 계산한다. 이 차량 밀도를 이용하여 도로를 여러 개의 등급으로 나누고 이 등급을 기반으로 하여 가장 안정적인 경로를 설정한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.325-340
• /
• 2008

The purpose of this study was to evaluate the artificial dental plaque by Streptococcus mutans on 4 different implant surfaces. In this study, the specimens were divided into 4 groups according to implant surface treatment. Uncoated implant group(n=5) which has an uncoated, smooth surfaced implant(Osstem, Korea), SLA implant group(n=5) which has an sandblasted large grit and acid-etched surface implant(Bicon, USA). Oxidized implant group(n=5) which has an oxidized surfaced implant (Osstem, Korea), and RBM implant group(n=5) which has resorbable blasting media(RBM) surfaced implant(Osstem, Korea). Acquired pellicle by human saliva and dental plaque by Streptococcus mutans were made on each implant surface. To analyze the plaque condition on implants surfaces, cell count and optical density were taken as a microbiologic method, and SEM(Scanning Electronic Microscope) findings was also taken for evaluation of surface condition. The following results were obtained. 1. Cell counting results of artificial dental plaque were Uncoated group($658.0{\pm}102.0$), RBM group($878.0{\pm}170.0$), SLA group ($946.0{\pm}42.0$), Oxidized group($992.0{\pm}40.0$), and there was difference between Oxidized group and Uncoated implant group(p<0.05). In case of modified cell counting results by v/w% were RBM group($197.8{\pm}45.2$), Oxidized group($207.04{\pm}8.34$), Uncoated group($261.6{\pm}40.6$), SLA group($315.4{\pm}14.0$), and there was difference between RBM group and SLA group(p<0.05). 2. Optical density results of artificial dental plaque after ultrasonic treatment was that there was difference among groups, and optical density of RBM group was higher than that of Uncoated group(p<0.05). In case of modified optical density results by v/w%, there was difference among groups, and the modified optical density of Uncoated group and SLA group was higher than those of Oxidized group and RBM group(P>0.05). 3. SEM findings of artificial dental plaque on the surfaces of implant as follows; there were artificial dental plaque on the surfaces of all test implants. Streptococcus mutans and by-product were observed at 10,000 times magnified condition on all test implants. Adhesion area of artificial dental plaque was about 1/2 of total surface after 24 hours incubate at $37^{\circ}C$. These results showed that there were differences among implant surfaces on the growth of Streptococcus mutans, and bacteria and by-product were covered about 1/2 area of total implant surfaces at 24 hours incubate at $37^{\circ}C$.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.242-248
• /
• 2016

The overall reaction rate of fuel cell is governed by oxygen reduction reaction (ORR) in the cathode due to its slowest reaction compared to the oxidation of hydrogen in the anode. The ORR efficiency can be readily evaluated by examining the adsorption strength of atomic oxygen on the surface of catalysts (i.e., known as a descriptor) and the adsorption energy can be controlled by transforming the surface geometry of catalysts. In the current study, the effect of the surface geometry of catalysts (i.e., strain effect) on the adsorption strength of atomic oxygen on platinum catalysts was analyzed by using density functional theory (DFT). The optimized lattice constant of Pt ($3.977{\AA}$) was increased and decreased by 1% to apply tensile and compressive strain to the Pt surface. Then the oxygen adsorption strengths on the modified Pt surfaces were compared and the electron charge density of the O-adsorbed Pt surfaces was analyzed. As the interatomic distance increased, the oxygen adsorption strength became stronger and the d-band center of the Pt surface atoms was shifted toward the Fermi level, implying that anti-bonding orbitals were shifted to the conduction band from the valence band (i.e., the anti-bonding between O and Pt was less likely formed). Consequently, enhanced ORR efficiency may be expected if the surface Pt-Pt distance can be reduced by approximately 2~4% compared to the pure Pt owing to the moderately controlled oxygen binding strength for improved ORR.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.109-114
• /
• 2011

This study was conducted to investigate the effect of hydraulic retention time(HRT) on the power density in a horizontal flow microbial fuel cell(MFC) reactor. When HRTs were 15min, 30min, 60min and 180min, maximum power densities were $24.7mW/m^2$, $27.3mW/m^2$, $22.8mW/m^2$ and $17.2mW/m^2$, respectively. The highest power density was obtained at HRT of 30min. It was 59% improvement when compared to the power density at an HRT of 180min. When HRT was increased, COD removal rate increased whereas the coulombic efficiency remained constant. The result shows that the optimal performance of the horizontal flow MFC reactor could be achieved at HRT of 30min.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.39.1-39.1
• /
• 2009

NiTi alloy is widely used innumerous biomedical applications (orthodontics, cardiovascular, orthopaedics, etc.) for its distinctive thermomechanical and mechanical properties such as shape memory effect, super elasticity, low elastic modulus and high damping capacity. However, NiTi alloy is still a controversial biomaterial because of its high Ni content which can trigger the risk of allergy and adverse reactions when Ni ion releases into the human body. In order to improve the corrosion resistance of the TiNi alloy and suppress the release of Ni ions, many surface modification techniques have been employed in previous literature such as thermal oxidation, laser surface treatment, sol-gel method, anodic oxidation and electrochemical methods. In this paper, the NiTi was electrochemically etched in various electrolytes to modify surface. The microstructure, element distribution, phase composition and roughness of the surface were investigatedby scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry(EDS), X-ray diffractometry (XRD) and atomic force microscopy (AFM). Systematic controlling of nano and submicron surface features was achieved by altered density of hydro fluidic acid in etchant solution. Nanoscale surface topography, such as, pore density, pore width, pore height, surface roughness and surface tension were extensively analyzed as systematical variables.Importantly, bone forming cell, osteoblast adhesion was increased in high density of hydro fluidic treated surface structures, i.e., in greater nanoscale surface roughness and in high surface areas through increasing pore densities.All results delineate the importance of surface topography parameter (pores) inNiTi to increase the biocompatibility of NiTi in identical chemistry which is crucial factor for determining biomaterials.

• The Journal of Korean Medicine
• /
• v.29 no.2
• /
• pp.116-132
• /
• 2008

Objective: This study investigated the effects of Bimanbang-1 (肥滿1號方: here in after referred to BMB-1) on the obese gene and obese inhibitory. Methods: C57BL/6 mice were induced by high fat diet. Mice were divided into three groups (normal, high fat diet with control, high fat diet with BMB-1 extract) and fed for 15 weeks. Items of this experimental study are as follows: body weight change, final body weight, the weight change of the adipocytes in body, the level change of LFT, NEFA and creatinine, the expression of ${\beta}3AR$ and leptin gene in primary adipocytes, the production change of leptin in primary adipocytes, the expression of ${\beta}3AR$, leptin and $TNF-{\alpha}$ in adipocytes tissue. Result: 1. All experimental groups showedthat the weight change decreased considerably and the high density group showedthat the final weight decreased considerably. 2. The high density group showed that the amount of the adipocyte in weight decreased considerably. 3. All experimental groups showedthat the amount of ALT decreased considerably, and AST decreased in the high density group. However, the amount of creatinine and glucose did not increase considerably. 4. All experimental groups showed that the amount of total cholesterol, LDL-cholesterol, triglyceride, and NEFA decreased, and HDL-cholesterol increased considerably. 5. The high density groups showedthat the amount of leptin decreased considerably. 6. All experimental groups showed that the revelation of ${\beta}3AR$ in primary adipose cell and 3T3-L1 cell increased considerably, and that the revelation of leptin and $TNF-{\alpha}$ in primary adipose cellsand 3T3-L1 cells decreased considerably. 7. All experimental groups showed that the size of adipocyte in adipocytes tissue decreased. 8. All experimental groups showed that the adipose vacuoles in liver tissue decreased considerably. Conclusion: The findings suggest that Bimanbang-1 causes weight loss and histological change, thus it may be effective to treat obesity.