• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.427-427
• /
• 2012

Ferroelectric-gate field effect transistor based memory using a nanowire as a conducting channel offers exceptional advantages over conventional memory devices, like small cell size, low-voltage operation, low power consumption, fast programming/erase speed and non-volatility. We successfully fabricated ferroelectric nonvolatile memory devices using both n-type and p-type Si nanowires coated with organic ferroelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] via a low temperature fabrication process. The devices performance was carefully characterized in terms of their electrical transport, retention time and endurance test. Our p-type Si NW ferroelectric memory devices exhibit excellent memory characteristics with a large modulation in channel conductance between ON and OFF states exceeding $10^5$; long retention time of over $5{\times}10^4$ sec and high endurance of over 105 programming cycles while maintaining ON/OFF ratio higher $10^3$. This result offers a viable way to fabricate a high performance high-density nonvolatile memory device using a low temperature fabrication processing technique, which makes it suitable for flexible electronics.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.118-118
• /
• 2008

The phylogenetic diversity of microbial communities in calcareous mats from Spearfish Creek, a freshwater stream located in the Black Hills of South Dakota, was examined using PCR-based 16S rDNA sequence analysis. In this study, two types of calcareous mats were compared: mature mats formed on the natural substrate of rock surfaces and developing mats on an artificial substrate of glass slides. Among 63 unique isolates from a clone library of 16S rRNA genes from mature mat samples, there were 8 phyla of Bacteria represented. The predominant phylum was Proteobacteria (48%), with the $\beta$ subclass being the largest group. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes from slide samples collected at intervals for four months showed considerable diversity of the microbial community from the earliest stages of community development. Amplicons isolated from DGGE gels and sequenced indicated that community succession has occurred without increasing microbial diversity. However, light microscopic analysis revealed a significant increase in microbial cell density throughout the community development. Scanning electron microscopy of mat samples provides evidence that diatoms are also important members of calcareous mat communities.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.403-408
• /
• 2012

A sample of ultra low carbon IF steel was processed by six-layer stack accumulative roll-bonding (ARB) and annealed. The ARB was conducted at ambient temperature after deforming the as-received material to a thickness of 0.5 mm by 50% cold rolling. The ARB was performed for a six-layer stacked, i.e. a 3 mm thick sheet, up to 3 cycles (an equivalent strain of ~7.0). In each ARB cycle, the stacked sheets were, first, deformed to 1.5 mm thickness by 50% rolling and then reduced to 0.5 mm thickness, as the starting thickness, by multi-pass rolling without lubrication. The specimen after 3 cycles was then annealed for 0.5 h at various temperatures ranging from 673 to 973 K. The microstructural evolution with the annealing temperature for the 3-cycle ARB processed IF steel was investigated in detail by transmission electron microscopy observation. The ARB processed IF steel exhibited mainly a dislocation cell lamella structure with relatively high dislocation density in which the subgrains were partially observed. The selected area diffraction (SAD) patterns suggested that the misorientation between neighboring cells or subgrains was very small. The thickness of the grains increased in a gradual way up to 873 K, but above 898 K it increased drastically. As a result, the grains came to have an equiaxed morphology at 898 K, in which the width and the thickness of the grains were almost identical. The grain growth occurred actively at temperatures above 923 K.

• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.179-184
• /
• 2014

In this study, we prepare polymer solar cells incorporating organic ligand-modified Ag nanoparticles (O-AgNPs) highly dispersed in the P3HT:PCBM layer. Ag nanoparticles decorated with water-dispersible ligands (WAgNPs) were also utilized as a control sample. The existence of the ligands on the Ag surface was confirmed by FT-IR spectra. Metal nanoparticles with different surface chemistries exhibited different dispersion tendencies. O-AgNPs were highly dispersed even at high concentrations, whereas W-AgNPs exhibited significant aggregation in the polymer layer. Both dispersion and blending concentration of the Ag nanoparticles in P3HT:PCBM matrix had critical effects on the device performance as well as light absorption. The significant changes in short-circuit current density ($J_{SC}$) of the solar cells seemed to be related to the change in the polymer morphology according to the concentration of AgNPs introduced. These findings suggested the importance of uniform dispersion of plasmonic metal nanoparticles and their blending concentration conditions in order to boost the solar cell performance.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.382-389
• /
• 2014

Raphanus sativus L. cv. Taebaek, a efficiently microspore-derived embryo (MDE)-forming cultivar, and 'Chungwoon', a non-MDE-forming cultivar were selected as donor plants for isolated microspore culture. Radish flower bud of 2.0 (small, S), 4.0 (medium, M), and 6.0 (large, L) ${\pm}$ 0.5 mm in length were isolated to determine the temporal relationship between flower bud size and MED yield. Anatomical observations revealed no difference in the structure of the flower buds between the two cultivars. In both cultivars, the stigmas were much longer than the floral leaf in M-sized flower buds. The MDE yields for 'Taebaek' per petri dish were 6.6 and 1.3 for M- and L-sized of flower buds, respectively, but MDE formation was not induced in the S flower buds. On the other hand, 'Chungwoon' failed to form MDEs in all flower buds. The microspore density of 'Taebaek' was 1.3 times more than that of 'Chungwoon' for M sized flower buds. Of the M-sized buds from 'Taebaek' and 'Chungwoon', 92.1 and 81.6%, respectively, were in the late uninucleate microspore stage, which is characterized by the highest frequency of MDE formation. Anatomical observations of MDE formation revealed that the microspores were able to divide to form a primordium from which cell division took place continuously in the 'Teabeak' cultivar. However, the microspores of 'Chungwoon' failed to progress beyond the primodium stage, resulting in lack of MDE formation. By contrast, after the formation of the primordium, various developmental stages of embyos from microspore were observed in the 'Taebaek' cultivar. These results can be used to determine MDE forming potentials of radish cultivars.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.232-241
• /
• 2012

The seasonal changes in phytoplankton species composition, standing crops, dominant species, species diversity and physico-chemical characteristics in the Unmun dam were studied, from August, 2009 to April, 2010. The phytoplanktons of a total of 121 taxa were identified, the composition of phytoplankton community was characterized by a green algae and diatoms, and the quantity composition of standing crops was dominated by diatoms and dinophyceae. The diatoms Aulacoseria granulata and blue-green alga Anabaena planktonica in Summer, Peridinium voltzii in Autumn and Asterionella formosa in Winter to Spring were, especially, prominent. The seasonal changes of the biomass varied from 578 cells $mL^{-1}$ to 12,938 cells $mL^{-1}$, and the maximum algal density was observed in April, Asterionells formosa contributed to 88% of the total cell numbers. The species diversity and richness were highest during autumn, and dominance index was highest in the spring season.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.780-787
• /
• 1989

The texturization properties of extrudate from isolated soybean protein and rice flour by extrusion cooking were investigated. The addition of up to 30% rice flur to isolated soy proetin could give more tenderness to the texturized extrudate. As the rice flour content increased, die temperature, nitrogen solubility index, and integrity index were decreased slightly with lower chewiness and gumminess. The water content of final extrudate was increased as the addition of rice flour increased, while density was maintained without variation, and rehydration ratio was decreased. The distribution of pressure profile during extrusion were in the range of $15-100kg/cm^3$. As the addition of rice flour increased, scanning electron micrographs demonstrated the gelatinized surface structure of rice starch and the increased air cell size of the testurized extrudate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5039-5044
• /
• 2015

In this study, we evaluated corrosion behavior of a common rolling stock axle material, RSA1, in seawater. 3-electrode electrochemical cell experiment was conducted using artificial sea water, fabricated according to ASTM-D1141 set by American Society for Testing and Materials, where the corrosion current density and corrosion rate were determined to be $18.3{\mu}A/cm2$ and 0.217 mm/yr, respectively, by employing potentiodynamic test method and impedance spectroscopy method. Considering the fact that life time of railway car is ~25 years, the expected corrosion layer depth is 5mm. Constant-current corrosion test was conducted to accelerate the corrosion process, to reach corrosion periods of 1,3 and 4 years based on Faraday's law, followed by tension tests where the reduced specimen gauge cross-section was re-measured for stress calculation. While no apparent corrosion-related changes in mechanical properties were observed in the elastic regime, the reduction in ductility of the material was found to be increased as the corrosion period increased. The results of this study are expected to be basic corrosion data for the design of rolling stock axles, which will be operated in the sea water environment.

• Nutrition Research and Practice
• /
• v.7 no.6
• /
• pp.453-459
• /
• 2013

The abnormal content of blood lipids often results in metabolic diseases, such as hyperlipidemia and obesity. Many agents, including natural sources from traditional food, have been developed to regulate the blood lipid contents. In this study, we examined the anti-hyperlipidemic activity of Rhynchosia nulubilis seeds pickled with brown rice vinegar (RNSpBRV), a Korean traditional pickled soybean food. Since RNSpBRV is made of R. nulubilis seeds (RNS) soaked in brown rice vinegar (BRV), we compared the anti-adipogenic activity between RNS, BRV and solid fraction of RNSpBRV (SF-RNSpBRV), liquid fraction of RNSpBRV (LF-RNSpBRV). For this, the inhibitory effect of lipid accumulation in 3T3-L1 adipocyte was checked by adding methanol extracts of mixed RNS and BRV, LF-RNSpBRV, and SF-RNSpBRV. The addition of each methanol extract up to 1 mg/ml showed no cytotoxicity on 3T3-L1 adipocyte, and approximately 20% of the lipid droplet formation was suppressed with the methanol extract of BRL or SF-RNSpBRV. The highest suppression (42.1%) was achieved with LF-RNSpBRV. In addition, mice fed a high fat diet (HFD) supplemented with 5% RNSpBRV powder led to increased high density lipoprotein (HDL) cholesterol and lower blood glucose, triglyceride, and total cholesterol compared to mice fed with a HFD diet only. Interestingly, the size of the epididymis cells gradually decreased in HFD + 1% RNSpBRV and HFD + 5% RNSpBRV-fed mice if compared those of HFD-fed mice. Taken together, these results provide evidence that RNSpBRV has a regulatory role in lipid metabolism that is related to hyperlipidemia.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.24-29
• /
• 2012

BACKGROUND: In recent years, microbial fuel cells (MFCs) have emerged as a promising technology for recovering renewable energy from waste biomass, especially wastewater. In this study, the possibility of bioelectricity generation in two chambered mediator-less microbial fuel cells (MFCs) was successfully demonstrated using fermentable and non-fermentable substrates. METHODS AND RESULTS: Two different electron acceptors have been tested in the cathode chamber for the effects of reducing agent on the power generation in MFCs. The average voltages of $0.26{\pm}0.014$ V and $0.36{\pm}0.02$ V were achieved with acetate using oxygen and potassium ferricyanide as reducing agent, respectively. Similarly, with glucose the average voltages of $0.256{\pm}0.05$ V and $0.340{\pm}0.04$ V were obtained using oxygen and ferricyanide, respectively. Using potassium ferricyanide as the reducing agent, the power output increases by 39 and 43% with acetate and glucose, respectively, as compared to the dissolved oxygen. Slightly higher coulombic efficiency (CE%) was obtained in acetate as compared to MFCs operated with glucose. The maximum power densities of 124 mW/$m^2$ and 204 mW/$m^2$ were obtained using dissolved oxygen and $K_3Fe(CN)_6$, respectively. CONCLUSION(s): This study demonstrates that power generation from the MFCs can be influenced significantly by the different types of catholyte. Relatively higher CE was obtained with $K_3Fe(CN)_6$. Thus, application of $K_3Fe(CN)_6$ as the catholyte can be vital for scaling uppower generation from the MFCs forreal time applications.