• Title/Summary/Keyword: Cell data

검색결과 5,827건 처리시간 0.033초

다중셀 낸드 플래시 메모리의 3셀 CCI 모델과 이를 이용한 에러 정정 알고리듬 (A 3-cell CCI(Cell-to-Cell Interference) model and error correction algorithm for Multi-level cell NAND Flash Memories)

  • 정진호;김시호
    • 대한전자공학회논문지SD
    • /
    • 제48권10호
    • /
    • pp.25-32
    • /
    • 2011
  • MLC NAND flash memory에서 cell간의 기생 커패시턴스 커플링으로 인해 발생하는 CCI에 의한 data error를 개선하기 위한 알고리듬을 제안하였다. 종래의 victim cell 주변 8-cell model보다 에러보정 알고리듬에 적용이 용이한 3-cell model을 제시하였다. 3-cell CCI model의 성능을 입증하기 위해 30nm와 20nm급 공정의 MLC NAND flash memory의 data분포를 분석하여, 주변 cell의 data pattern에 의한 victim cell의 Vth shift관계를 확인하였다. 측정된 Vth분포 data에 MatLab을 이용하여 제안된 알고리듬을 적용하는 경우 BER이 LSB에서는 28.9%, MSB에는 19.8%가 개선되었다.

Handover 기반과 Non-Handover 기반의 Mobility Management 기법의 비교 (Comparison of Mobility Management methods Handover based and Non-Handover based)

  • 우중재;주형식
    • 전기전자학회논문지
    • /
    • 제16권2호
    • /
    • pp.81-85
    • /
    • 2012
  • 본 논문에서는 macro-cell 위에 동일한 주파수를 쓰는 pico-cell이 overlay 되어 있는 환경에서, 움직이는 사용자에 대한 management 방법이 움직이는 사용자가 지원 받을 수 있는 data rate에 미치는 영향을 분석한다. 이러한 분석을 통해 mobility management 방식에 따른 움직이는 사용자가 지원받을 수 있는 data rate는 사용자와 pico-cell의 상대적 위치에 의존함을 확인하였다.

Load Cell Noise 제거를 위한 Digital Load Cell 에 대한 연구 (A study on a digital load cell for the removal of load cell noise)

  • 이영진;이흥호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.562-564
    • /
    • 2002
  • Noise reduction and a simplification of a precision measurement system has been performed by changing analog output mode of a load cell into digital output mode. Usually, analog output signal of a few $\mu V$ from a load cell are amplified by amp and acquired by A/D converter. If the distance from a load cell to a DAS(Data Acquisition System) increases, more noise signals are mixed. So, a microprocessor has been integrated into a load cell so that the amplification and A/D conversion of output signals could be done in close proximity to the lode cell for the reduction in mixing of noise. Obtained data from the load cell like this manner are transferred to a computer with digital values(of TTL level). To simplify the configuration of a multi-channel DAS, RS-485 communication system has used for data transfer.

  • PDF

JTAG을 이용한 휴대폰 포렌식 데이터 수집 (Forensic Data Acquisition on Cell Phone using JTAG Interface)

  • 김건우;류재철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.333-334
    • /
    • 2008
  • With the role of cell phones in today's society as a digital personal assistant as well as the primary tool for personal communication, it is possible to imagine the involvement of cell phones in almost any type of crime. The progression of a criminal investigation can hinge on vital clues obtained from a cell phone. This paper will be concentrated on CDMA system phones and focus on the data extraction for cell phone forensics. Especially, the data acquisition method of JTAG interface access to memory chip will be covered.

  • PDF

An Advanced Embedded SRAM Cell with Expanded Read/Write Stability and Leakage Reduction

  • Chung, Yeon-Bae
    • 전기전자학회논문지
    • /
    • 제16권3호
    • /
    • pp.265-273
    • /
    • 2012
  • Data stability and leakage power dissipation have become a critical issue in scaled SRAM design. In this paper, an advanced 8T SRAM cell improving the read and write stability of data storage elements as well as reducing the leakage current in the idle mode is presented. During the read operation, the bit-cell keeps the noise-vulnerable data 'low' node voltage close to the ground level, and thus producing near-ideal voltage transfer characteristics essential for robust read functionality. In the write operation, a negative bias on the cell facilitates to change the contents of the bit. Unlike the conventional 6T cell, there is no conflicting read and write requirement on sizing the transistors. In the standby mode, the built-in stacked device in the 8T cell reduces the leakage current significantly. The 8T SRAM cell implemented in a 130 nm CMOS technology demonstrates almost 100 % higher read stability while bearing 20 % better write-ability at 1.2 V typical condition, and a reduction by 45 % in leakage power consumption compared to the standard 6T cell. The stability enhancement and leakage power reduction provided with the proposed bit-cell are confirmed under process, voltage and temperature variations.

온라인 데이터 스트림에서의 동적 부분 공간 클러스터링 기법 (Dynamic Subspace Clustering for Online Data Streams)

  • 박남훈
    • 디지털융복합연구
    • /
    • 제20권2호
    • /
    • pp.217-223
    • /
    • 2022
  • 온라인 데이터 스트림에 대한 부분 공간 클러스터링은 데이터 공간 차원의 모든 부분 집합을 검사해야 하므로 많은 양의 메모리 자원을 필요로 한다. 유한한 메모리 공간에서 데이터 스트림에 대한 클러스터들의 지속적인 변화를 추적하기 위해 본 논문에서는 메모리 자원을 효과적으로 사용하는 격자기반 부분 공간 클러스터링 알고리즘을 제안한다. n차원 데이터 스트림이 주어지면 각 차원 데이터 공간에 있는 데이터 항목의 분포 정보를 격자셀 리스트에 의해 모니터링 된다. 첫번째 레벨의 격자셀 목록에서 데이터 항목의 빈도가 높아 단위 격자셀이 되면 해당 격자셀로부터 모든 가능한 부분 공간의 클러스터를 찾기 위해 다음 레벨의 격자셀 리스트를 자식 노드로 생성한다. 이와 같이 최대 다차원 n레벨의 격자셀 부분 공간 트리가 구성되고, k차원의 부분 공간 클러스터는 부분 공간 격자셀 트리의 k레벨에서 찾을 수 있다. 실험을 통해서 제안하는 방법이 기존 방법만큼 정확도를 유지하면서, 밀집 공간만 확장하여 컴퓨팅 자원을 보다 효율적으로 사용하는 것을 확인하였다.

효율적 망 자원 이용을 위한 부하 인지 셀 선택 기법 (Load-Aware Cell Selection Method for Efficient Use of Network Resources)

  • 박재성
    • 한국통신학회논문지
    • /
    • 제40권12호
    • /
    • pp.2443-2449
    • /
    • 2015
  • 단말이 망에서 제공받는 데이터 전송율은 단말과 셀 사이의 SINR 뿐만 아니라 셀이 단말에게 할당하는 무선 자원양에 의해서도 결정된다. 따라서 단말이 SINR만을 기준으로 접속할 셀을 선택하면 비록 최대 SINR을 제공하는 셀에 접속한다고 하더라도 최대 서비스율을 제공받지 못할 수도 있다. 또한 네트워크의 입장에서는 SINR을 기준으로 접속 셀이 선택되므로 일부 셀들은 다수의 단말이 접속하는 반면 주변의 다른 셀들은 접속 단말의 수가 적게 되어 셀간 부하 불균형 상태가 발생될 확률이 커지고 이로 인해 이동 통신 시스템의 자원 이용율이 낮아지게 된다. 이에따라 본 논문에서는 SINR뿐만 아니라 셀의 부하를 고려한 접속 셀 선택 방법을 제안한다. 이를 위해 접속 셀 선택 지표로 SINR 대신에 최대 데이터 전송율과 최소 전송율 단절 확률을 제시한다. 제안 기법의 성능 평가를 위한 모의실험 결과 최대 데이터 전송율을 이용한 셀 선택 방법은 타 기법에 비해 시스템 효율과 셀간 부하 균등 측면에서 향상된 성능을 보였으며 최소 전송율 단절 확률을 이용한 셀 선택 방법은 타 기법에 비해 단말의 평균 전송율 단절 확률 측면에서 향상된 성능을 보였다.

Cell Virtualization with Network Partition for Initial User Association in Software Defined Small-cell Networks

  • Sun, Guolin;Lu, Li;Ayepah-Mensah, Daniel;Fang, Xiufen;Jiang, Wei
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권10호
    • /
    • pp.4703-4723
    • /
    • 2018
  • In recent years, dense small cell network has been deployed to address the challenge that has resulted from the unprecendented growth of mobile data traffic and users. It has proven to be a cost efficeient solution to offload traffic from macro-cells. Software defined heterogeneous wireless network can decouple the control plane from the data plane. The control signal goes through the macro-cell while the data traffic can be offloaded by small cells. In this paper, we propose a framework for cell virtualization and user association in order to satisfy versatile requirements of multiple tenants. In the proposed framework, we propose an interference graph partioning based virtual-cell association and customized physical-cell association for multi-homed users in a software defined small cell network. The proposed user association scheme includes 3 steps: initialization, virtual-cell association and physical-cell association. Simulation results show that the proposed virtual-cell association outperforms the other schemes. For physical-cell association, the results on resource utilization and user fairness are examined for mobile users and infrastructure providers.

MADF: Mobile-Assisted Data Forwarding for Wireless Data Networks

  • Xiaoxin;Gary, Shueng-Han;Biswanath;Bharat
    • Journal of Communications and Networks
    • /
    • 제6권3호
    • /
    • pp.216-225
    • /
    • 2004
  • In a cellular network, if there are too many data users in a cell, data may suffer long delay, and system's quality-of-service (QoS) will degrade. Some traditional schemes such as dynamic channel-allocation scheme (DCA) will assign more channels to hot (or overloaded) cells through a central control system (CC) and the throughput increase will be upper bounded by the number of new channels assigned to the cell. In mobile-assisted data forwarding (MADF), we add an ad-hoc overlay to the fixed cellular infrastructure and special channels-called forwarding channels- are used to connect mobile units in a hot cell and its surrounding cold cells without going through the hot cell's base station. Thus, mobile units in a hot cell can forward data to other cold cells to achieve load balancing. Most of the forwarding-channel management work in MADF is done by mobile units themselves in order to relieve the load from the CC. The traffic increase in a certain cell will not be upper bounded by the number of forwarding channels. It can be more if the users in hot cell are significantly far away from one another and these users can use the same forwarding channels to forward data to different cold neighboring cells without interference. We find that, in a system using MADF, under a certain delay requirement, the throughput in a certain cell or for the whole net-work can be greatly improved.

The Case of Proportional Cell Frequencies for the Two-Way Cross-Classification with Interaction

  • Kim, Jong-Duk
    • Journal of the Korean Data and Information Science Society
    • /
    • 제9권2호
    • /
    • pp.119-138
    • /
    • 1998
  • The case of proportional cell frequencies for the two-way cross-classification with interaction is considered. Several types of hypotheses for the general unbalanced data that are commonly used in the literature are shown, and they are written out for this particular case. A reparameterized form of the cell means model is defined to establish the reparameterized model, and orthogonal property of the model is shown using the augmented matrix and the numerator sums of squares are computed. Different ways of producing the same analysis of variance tables are shown in both orthogonal and nonorthogonal situations.

  • PDF