• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.711-717
• /
• 2016

Recently, fuel cell generation system with high energy efficiency and low CO2 emission is energetically interconnected with distribution power system. Especially, MCFC(molten carbonate fuel cell) operating at high temperature conditions is commercialized and installed as a form of large scale power generation system. However, it is reported that power system disturbances such as harmonic distortion, surge phenomenon, unbalance current, EMI(Electromagnetic Interference), EMC (Electromagnetic Compatibility) and so on, have caused several problems including malfunction of protection device and damage of control devices in the large scale FCGS(Fuel Cell Generation System). Under these circumstances, this paper proposes countermeasure algorithms to prevent power system disturbances based on the modelling of PSCAD/EMTDC and P-SIM software. From the simulation results, it is confirmed that proposed algorithms are useful method for the stable operation of a large scale FCGS.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.489-493
• /
• 2016

Scandia ($Sc2O_3$)-stabilized zirconia (ScSZ) electrolyte-supported symmetrical solid oxide electrolyzer cells (SOECs), in which lanthanum strontium cobalt ferrite (LSCF)-gadolinia ($Gd_2O_3$)-doped ceria (GDC) composite materials are used as both the cathode and anode, were fabricated and their high temperature steam electrolysis (HTSE) performance was investigated. Current density-voltage curves were obtained for cells operated in 10% $H_2O$/90% Ar at 750, 800, and $850^{\circ}C$. It was possible to determine the ohmic, cathodic, and anodic contributions to the total overpotential using the three-electrode technique. The HTSE performance was significantly improved in the symmetrical cell with LSCF-GDC electrodes compared to the cell consisting of an Ni-YSZ cathode and LSCF-GDC anode. It was found that the overpotential due to the LSCF-GDC cathode largely decreased and, at a given current density, the total cell voltage decreased, which resulted in the enhanced hydrogen production rate in the symmetrical cell.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1909-1913
• /
• 2022

This work shows the technical feasibility to obtain uranium tetrafluoride through an electrochemical mercury cell. This technique represents a custom scaling-up methodology from our previous studies to obtain UF₄ using the dropping mercury electrode cell. The UF₄ products were obtained from natural UF₆ gas, which was hydrolyzed to obtain a 50 g/L UO₂F₂ solution. The electrolysis cell was made using a mercury reservoir, to reach UF₄ production rates of 1 Kg UF₄/day. This custom design allowed a stable UF₄ production thanks to the mercury cathode, which do not permit the accumulation of solid products in its surface. The cell was tested using current densities from 5.000 to 17.500 A/m² and temperatures from 25 to 65 ℃. The maximum current efficiency achieved under these conditions was 80%. The UF₄ powders possessed spherical morphology, with diameters between 20 and 80 ㎛. Compared to the SnCl₂ precipitation, this process did not allow preferential growth of the precipitates. This improved the compaction of the UF₄ - Mg powders mixtures, with densities between 3.0 and 3.5 g/cm³. The purity of the UF₄ products was over 98%.

• Hanyang Medical Reviews
• /
• v.33 no.1
• /
• pp.59-64
• /
• 2013

Cancer remains the leading cause of death worldwide despite intense efforts in developing innovative treatments. Current approaches in cancer therapy are mainly directed to a selective targeting of cancer cells to avoid potential side effects associated with conventional therapy. In this respect, Natural killer (NK) cells have gained growing attention and are now being considered as promising therapeutic tools for cancer therapy owing to their intrinsic ability to rapidly recognize and kill cancer cells, while sparing normal healthy cells. NK cells play a key role in the first line of defense against transformed and virus-infected cells. NK cells sense their target through a whole array of receptors, both activating and inhibitory. Functional outcome of NK cell against target cells is determined by the balance of signals transmitted from diverse activating and inhibiting receptors. Despite significant progress made in the role of NK cells attack as a pivotal sentinel in tumor surveillance, the molecular has been that regulate NK cell responses remain unclear, which restricts the use of NK cells as a therapeutic measure. Accordingly, current efforts for NK cell-based cancer therapy have largely relied on the strategies that are based on the manipulation of inhibitory receptor function. However, if we better understand the mechanisms governing NK cell activation, including those mediated by diverse activating receptors, this knowledge can be applied to the development of optimal design for cancer immunotherapy by targeting NK cells.

• IMMUNE NETWORK
• /
• v.23 no.1
• /
• pp.2.1-2.19
• /
• 2023

Immune diversification helps protect the host against a myriad of pathogens. CD8⁺ T cells are essential adaptive immune cells that inhibit the spread of pathogens by inducing apoptosis in infected host cells, ultimately ensuring complete elimination of infectious pathogens and suppressing disease development. Accordingly, numerous studies have been conducted to elucidate the mechanisms underlying CD8⁺ T cell activation, proliferation, and differentiation into effector and memory cells, and to identify various intrinsic and extrinsic factors regulating these processes. The current knowledge accumulated through these studies has led to a huge breakthrough in understanding the existence of heterogeneity in CD8⁺ T cell populations during immune response and the principles underlying this heterogeneity. As the heterogeneity in effector/memory phases has been extensively reviewed elsewhere, in the current review, we focus on CD8⁺ T cells in a "naive" state, introducing recent studies dealing with the heterogeneity of naive CD8⁺ T cells and discussing the factors that contribute to such heterogeneity. We also discuss how this heterogeneity contributes to establishing the immense complexity of antigen-specific CD8⁺ T cell response.

• Molecules and Cells
• /
• v.47 no.2
• /
• pp.100031.1-100031.13
• /
• 2024

It is now well-accepted that obesity-induced inflammation plays an important role in the development of insulin resistance and type 2 diabetes. A key source of the inflammation is the murine epididymal and human visceral adipose tissue. The current paradigm is that obesity activates multiple proinflammatory immune cell types in adipose tissue, including adipose-tissue macrophages (ATMs), T Helper 1 (Th1) T cells, and natural killer (NK) cells, while concomitantly suppressing anti-inflammatory immune cells such as T Helper 2 (Th2) T cells and regulatory T cells (Tregs). A key feature of the current paradigm is that obesity induces the anti-inflammatory M2 ATMs in lean adipose tissue to polarize into proinflammatory M1 ATMs. However, recent single-cell transcriptomics studies suggest that the story is much more complex. Here we describe the single-cell genomics technologies that have been developed recently and the emerging results from studies using these technologies. While further studies are needed, it is clear that ATMs are highly heterogeneous. Moreover, while a variety of ATM clusters with quite distinct features have been found to be expanded by obesity, none truly resemble classical M1 ATMs. It is likely that single-cell transcriptomics technology will further revolutionize the field, thereby promoting our understanding of ATMs, adipose-tissue inflammation, and insulin resistance and accelerating the development of therapies for type 2 diabetes.

• IMMUNE NETWORK
• /
• v.22 no.5
• /
• pp.37.1-37.16
• /
• 2022

Autoimmune diseases are caused by a dysfunction of the acquired immune system. In a subset of autoimmune diseases, B cells escaping immune tolerance present autoantigen and produce cytokines and/or autoantibodies, resulting in systemic or organ-specific autoimmunity. Therefore, B cell depletion with monoclonal Abs targeting B cell lineage markers is standard care therapy for several B cell-mediated autoimmune disorders. In the last 5 years, genetically-engineered cellular immunotherapies targeting B cells have shown superior efficacy and long-term remission of B cell malignancies compared to historical clinical outcomes using B cell depletion with monoclonal Ab therapies. This has raised interest in understanding whether similar durable remission could be achieved with use of genetically-engineered cell therapies for autoimmunity. This review will focus on current human clinical trials using engineered cell therapies for B cell-associated autoimmune diseases.

• The Korean Journal of Physiology
• /
• v.27 no.2
• /
• pp.151-162
• /
• 1993

In order to investigate the effect of intracellular cyclic GMP on calcium current the whole-cell patch clamp technique with internal perfusion method was used in isolated ventricular myocytes of the rabbit. Cyclic GMP, 8-bromo-cyclic GMP, cyclic AMP, isoprenaline and forskolin were perfused into cells and their effects on calcium current were analysed by applying depolarizing step pulses of + 10 mV in amplitude far 300 msec from holding potential of - 40 mV. Not only cyclic AMP $(100\;{\mu}M)$ but also cyclic GMF $(100\;{\mu}M)$ increased the basal calcium current. 8-Bromo-cyclic GMP $(100\;{\mu}M)$, a good stimulator of the cyclic GMP-dependent protein kinase, also increased the basal calcium current and its peak amplitude of calcium current was larger than that in the presence of cyclic AMP or cyclic GMP alone. In the presence of $100\;{\mu}M$ cyclic GMP or $100\;{\mu}M$ 8-bromo-cyclic GMP, already augmented calcium current was potentiated by intracellular application of $100\;{\mu}M$ cyclic AMP or $1\;{\mu}M$ isoprenaline or $1\;{\mu}M$ forskolin. In the presence of cyclic GMP, acetylcholine reduced the calcium current only when the calcium current was increased by isoprenaline. From the above results it could be concluded that intracellular perfusion with cyclic GMP increases the basal calcium current via a mechanism involving a cyclic GMP-dependent protein kinase.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.182-186
• /
• 2014

Two commercial carbon plates were evaluated as a current collector (bipolar plate) in the all vanadium redox-flow battery (V-RFB). The performance properties of V-RFB were test in the current density of $60mA/cm^2$. The electromotive forces (OCV at SOC 100%) of V-RFB using A and B current collector were 1.47 V and 1.54 V. The cell resistance of V-RFB using A current collector was $4.44{\sim}5.00{\Omega}{\cdot}cm^2$ and $3.28{\sim}3.75{\Omega}{\cdot}cm^2$ for charge and discharge, respectively. The cell resistance of V-RFB using B current collector was $4.19{\sim}4.42{\Omega}{\cdot}cm^2$ and $4.71{\sim}5.49{\Omega}{\cdot}cm^2$ for charge and discharge, respectively. The performance of V-RFB using each current collector was evaluated. The performance of V-RFB using A current collector was 93.1%, 76.8% and 71.4% for average current efficiency, average voltage efficiency and average energy efficiency, respectively. The performance of V-RFB using B current collector was 96.4%, 73.6% and 71.0% for average current efficiency, average voltage efficiency and average energy efficiency, respectively.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.228-235
• /
• 2008

Nickel plating thickness increased with the electric current density, and the augmentation was more thick in $6{\sim}10A/dm^2$ than low current. Hull-cell analysis was tested to evaluate the current density. Optimum thickness was obtained at a temperature of $60^{\circ}C$, and the pH fluctuation of 3.5~4.0. Over the Nickel ion concentration of 300 g/L, plating thickness increased with the current density. The rate of decrease in nickel ion concentration was increased with the current density. The quantity of plating electro-deposition was increased at the anode surface, which was correlated with the increase of plating thickness. The plating thickness was increased because of the quick plating speed. However, the condition of the plating surface becomes irregular and the minuteness of nickel plating layer was reduced with the plating rate. After the corrosion test of 25 h, it was resulted in that maintaining low electric current density is desirable for the excellent corrosion resistance in lustered nickel plating. According to the program simulation, the thickness of diffusion layer was increased and the concentration of anode surface was lowered for the higher current densities. The concentration profile showed the regular distribution at low electric current density. The field plating process was controlled by the electric current density and the plating thickness instead of plating time for the productivity. The surface physical property of plating structure or corrosion resistance was excellent in the case of low electric current density.