• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.531-536
• /
• 2009

주요 국산 수종인 잣나무재와 일본잎갈나무재의 횡단면상 방사조직 밀도 및 접선단면상 복열방사조직 출현 빈도수에 대한 변이성을 조사하였다. 방사조직의 밀도는 잣나무재 4.6개/mm, 일본잎갈나무재 9.0개/mm로 일본잎갈나무재의 방사조직 밀도가 더 높게 나타났다. 또한, 방사조직 밀도는 수 부근에서 높았고, 수피 쪽으로 이행함에 따라 점차 감소하는 경향을 나타냈다. 한 연륜 내에서의 복열방사조직 출현 빈도수는 일본잎갈나무재가 잣나무재보다 높았다. 잣나무재의 복열방사조직은 복열의 수가 1세포고인 것(B+1)이, 일본잎갈나무재는 2세포고인 것(B+2)이 가장 많았다. 일반적으로 복열방사조직의 출현 빈도수는 조재부가 만재부보다 높았는데 일본잎갈나무재의 경우 복열의 수가 6~7세포고에 달하는 것(B+6~B+7)도 있었다. 본 연구 결과, 방사조직 밀도의 변이성은 성숙재와 미성숙재를 구분하는 기초 자료로뿐만 아니라 방사조직의 출현 빈도와 함께 두 수종을 식별하는 자료로도 활용될 수 있을 것으로 생각되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.522-530
• /
• 2003

Generally, diaphragms are installed in the box girder to prevent or decrease the distortion of the cross section. In engineering practice, diaphragms are spaced in 5m intervals without reasonable basis. the usual diaphragm type is solid-plate type. It is considered to be noneconomical design to the almost design engineers. In this paper, the parametric study was performed to present the design proposal about the diaphragm stiffness and spacing only in the single cell box girder. For that, the distortional warping normal stress, bending normal stress and transverse bending normal stress were analyzed using finite element program 'SMB' for the accurate structural analysis.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.909-914
• /
• 1996

In this research [RCOOH]-$\varepsilon$-Caprolactam-Montmorillonite was synthesized by reaction between Na-Mont-morillonite (10-Carboxy-n-decyl)dimethylethylammonium (=RCCOH) ion and $\varepsilon$-Caprolactame-Motmorillonite ob-tained was 3.62$\AA$ After heat treatment of this intercalations complex at 37$^{\circ}C$ in high vacuum for 12 h 24 h, 40 h and 90 h the basal spacing was reduced to 35.8$\AA$, 34.2, 17.5 $\AA$ and 16.6$\AA$ respectively. The calculated amount of free $\varepsilon$-caprolactame included int he intercaltions complex and that of $\varepsilon$-caprolactame which is interca-lated into the interlayer space of montomorillonite and still remained after heat treatment are 4.6~4.9 and 0.5 molecules per unite cell of montmorillonite respectively.

• 한국주조공학회지
• /
• 제12권3호
• /
• pp.203-209
• /
• 1992

Directional solidification of Al-Ti peritetic alloys was carried out using Upward Continuous Casting Process. The morphology of a solid-liquid interface and solidification microstructures were investigated under various crystal growing conditions. The experimental results were compared with those attained by the Bridgman method. The cell spacing of the Al-Ti peritetic alloys and the primary dendrite arm spacing of the Al-Ti peritetic alloys decreased with an increase in pulling speed. The primary ${\beta}$ phase of the Al-Cr and Al-Ti peritectic alloys did not appear in solidification microstructures because of the depleted solute contents in the melt ahead of the solid-liquid interface.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.507-534
• /
• 2015

The present work investigates the behavior of the embankment models resting on soft soil reinforced with ordinary and stone columns encased with geogrid. Model tests were performed with different spacing distances between stone columns and two lengths to diameter ratios (L/d) of the stone columns, in addition to different embankment heights. A total number of 42 model tests were carried out on a soil with undrianed shear strength $${\sim_\sim}10kPa$$. The models consist of stone columns embankment at s/d equal to 2.5, 3 and 4 with L/d ratio equal 5 and 8. Three embankment heights; 200 mm, 250 mm and 300 mm were tested for both tests of ordinary (OSC) and geogrid encased stone columns (ESC). Three earth pressure cells were used to measure directly the vertical effective stress on column at the top of the middle stone column under the center line of embankment and on the edge stone column for all models while the third cell was placed at the base of embankment between two columns to measure the vertical effective stress in soft soil directly. The performance of stone columns embankments relies upon the ability of the granular embankment material to arch over the 'gaps' between the stone columns spacing. The results showed that the ratio of the embankment height to the clear spacing between columns (h/s-d) is a key parameter. It is found that (h/s-d)<1.2 and 1.4 for OSC and ESC, respectively; (h is the embankment height, s is the spacing between columns and d is the diameter of stone columns), no effect of arching is pronounced, the settlement at the surface of the embankment is very large, and the stress acting on the subsoil is virtually unmodified from the nominal overburden stress. When $(h/s-d){\geq}2.2$ for OSC and ESC respectively, full arching will occur and minimum stress on subsoil between stone columns will act, so the range of critical embankment height will be 1.2 (h/sd) to 2.2 (h/s-d) for both OSC and ESC models.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.375-381
• /
• 2007

Statement of problem. Prior to determining an optimal width of micropatterned grooves provided on titanium substrata, we have done a pilot study using surface topographies in combined microm and submicrom levels. Purpose. The purpose of this study was twofold 1) to assess the proliferation and 2) to analyze the expression of genes encoding the intracellular signaling proteins involved in cell-substratum adhesions and adhesion-dependent G1 phase cell cycle progression of human gingival fibroblasts plated on smooth and microgrooved/acid-etched titanium substrata. Material and methods. Three groups of titanium discs as NE0 (smooth Ti substrata), E15 (Ti substrata with microgrooves of $15{\mu}m$ of spacing and $3.5{\mu}m$ in depth and with further acidetching), and E30 (Ti substrata with microgrooves of $30{\mu}m$ spacing and $3.5{\mu}m$ in depth and with further acid-etching) served as the human gingival fibroblasts' substrata. Viability and proliferation of fibroblasts were determined using an XTT assay. Gene expressions of fibronectin, ${\alpha}5$ integrin, CDK4, and $p27^{kip}$ were analyzed in RT-PCR. Cell-substratum interactions were analyzed in SEM. Results. From the XTT assay at 24 h incubation, the mean optical density (OD) value of E15 was significantly greater than the values of E30 and NE0. At 48 and 96 h however, the mean OD values of E30 were significantly greater than the values of E15 and NE0. No differences in the expression of PCR transcripts at 96 h incubations were noted between groups, whereas at 48 h, an unexpected increase in the expression of all the transcripts were noted in E15 compared with other two groups. Fibroblasts were observed to orient and adhere inside the microgrooves. Conclusion. Micropatterned grooves and acid-etching on Ti substrata alter viability and gene expression of adhered human gingival fibroblasts.

• 한국컴퓨터정보학회논문지
• /
• 제7권4호
• /
• pp.174-181
• /
• 2002

본 논문에서는 기존의 셀 간격 제어기에서 방출되는 셀의 시간을 참조하는 RDT 방식에서의 지연 누적을 보완하면서 RDT의 장점을 활용하기 위하여 RAT의 방식에서 적용한 것과 같이 셀 도착 시간을 기준으로 하며, 간격 제어기에서 따로 데이터 버퍼를 두지 않고 시스템 내의 데이터 버퍼를 사용하여 셀들을 저장하고 저장된 셀들을 재방출하는 논리적 출발시간 TIT(theoretical inter-arrival time)를 이용하는 방식을 제안한다.

• 한국컴퓨터정보학회논문지
• /
• 제6권1호
• /
• pp.45-50
• /
• 2001

ATM 망에서는 고속의 셀 전송 특성으로 인해 폭주가 발생할 수 있으며. 예측할 수 없는 트래픽의 변화로 인한 셀 지연과 셀 손실이 발생할 수 있다. 따라서 트래픽 제어는ATM 망에서 필수적이며, 폭주현상을 줄이기 위한 여러 가지 방법들 가운데 하나가 셀 간격 제어이다. 본 논문에서는 리키버켓과 EWMA로 구성된 혼합형 셀 간격 제어 기법을 연구한다. 혼합형 셀 간격 제어기는 시간 윈도우를 가진 EWMA와 토큰 풀을 가진 리키버켓 간격제어 버퍼로 구성된다. BONeS 시뮬레이터에서 ON/OFF 트래픽 소스 모델을 이용하여 제안한 혼합형 셀 간격 제어 기법의 성능을 평가한 결과 패킷화된 음성 트래픽과 고속 트래픽 소스 모두 셀 간격이 평균 비트율에 수렴하여 제어되는 것을 관찰할 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제7권3호
• /
• pp.143-148
• /
• 2002

ATM망에서는 예측할 수 없는 트래픽의 변화로 셀 지연과 셀 손실이 발생할 수 있으며 고속의 셀 전송 특성으로 인해 폭주가 발생할 수 있다. 따라서 트래픽 제어는 ATM 망에서 필수적이며, 폭주현상을 줄이기 위한 여러 가지 방법들 가운데 하나가 셀 쉐이핑이다. 본 논문에서는 리키버켓과 TJW로 구성된 셀 쉐이핑 기법을 연구한다. 셀 쉐이퍼는 시간 윈도우를 가진 TJW와 토큰 풀을 가진 리키버켓, 간격제어 버퍼로 구성된다. BONeS시뮬레이터에서 ON/OFF트래픽 소스 모델을 이용하여 제안한 셀 쉐이핑 기법의 성능을 평가한 결과, 패킷화된 음성 트래픽과 고속 트래픽 소스 모두 셀 간격이 평균 비트율에 수렴하여 제어되는 것을 관찰할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.