• The Journal of Korean Physical Therapy
• /
• v.27 no.3
• /
• pp.140-146
• /
• 2015

Purpose: To determine the effects of 630 nm light emitting diode (LED) on full-thickness wound healing. Methods: Twelve male Sprague-Dawley rats were randomly divided into LED (n=6) and control group (n=6). Two $19.63mm^2$ wounds were created on the mid dorsum. LED group received a 630 nm LED irradiation with $3.67mW/cm^2$ for 30 minutes ($6.60J/cm^2$) for 7 days, while control group received sham LED irradiation. Epithelial gap, collagen density, ${\alpha}$-SMA fibroblast and PCNA keratinocyte were measured on histochemical and immunohistochemical staining using image analysis system. An independent t-test was conducted to compare the difference between groups. Results: The wound closure rate, collagen density, ${\alpha}$-SMA fibroblast number, epithelial gap and PCNA keratinocyte number have shown no significant difference between LED and control group at day 3 after the treatment. At day 7 after the treatment, the wound closure rate in LED group was increased when compared with control group (p<0.05). The collagen density (p<0.05) and ${\alpha}$-SMA immunoreactive fibroblast number (p<0.001) were increased when compared with control group at day 7. The epithelial gap in LED group was significantly shorten than control group at day 7 (p<0.01). The PCNA positive cell number in LED group was higher than control group at day 7 (p<0.01). Conclusion: 630 nm LED with $3.67mW/cm^2$, $6.60J/cm^2$ accelerate collagen deposition by stimulating fibroblasts, and enhance wound contraction by differentiating myofibroblasts in the dermis, and accelerate keratinocyte proliferation by facilitating DNA synthesis in the epidermis. It may promote the healing process in proliferation stage of wound healing.

• Journal of Cancer Prevention
• /
• v.21 no.2
• /
• pp.95-103
• /
• 2016

Background: Excess energy supply induces chronic low-grade inflammation in association with oxidative stress in various tissues including intestinal epithelium. The objective of this study was to investigate the effect of high-fat diet (HFD) on intestinal cell membrane integrity and intestinal tumorigenesis in $Apc^{Min/+}$ mice. Methods: Mice were fed with either normal diet (ND) or HFD for 12 weeks. The number of intestinal tumors were counted and biomarkers of endotoxemia, oxidative stress, and inflammation were determined. Changes in intestinal integrity was measured by fluorescein isothiocyanate (FITC)-dextran penetration and membrane gap junction protein expression. Results: HFD group had significantly higher number of tumors compared to ND group (P < 0.05). Blood total antioxidant capacity was lower in HFD group, while colonic 8-hydroxy-2'-deoxyguanosine level, a marker of oxidative damage, was higher in HFD group compared to that of ND group (P < 0.05). The penetration of FITC-dextran was substantially increased in HFD group (P < 0.05) while the expressions of membrane gap junction proteins including zonula occludens-1, claudin-1, and occludin were lower in HFD group (P < 0.05) compared to those in ND group. Serum concentration of lipopolysaccharide (LPS) receptor (CD14) and colonic toll-like receptor 4 (a LPS receptor) mRNA expression were significantly higher in HFD group than in ND group (P < 0.05), suggesting that significant endotoxemia may occur in HFD group due to the increased membrane permeability. Serum interleukin-6 concentration and myeloperoxidase activity were also higher in HFD group compared to those of ND group (P < 0.05). Conclusions: HFD increases oxidative stress disrupting intestinal gap junction proteins, thereby accelerating membrane permeability endotoxemia, inflammation, and intestinal tumorigenesis.

• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.51-59
• /
• 2020

In the case of cubesat, a PCB-based deployable solar panel advantageous in terms of weight reduction and electrical circuit design is widely used considering the limited weight and volume of satellites. However, because of the low thermal conductivity of PCB, there is a limit relative to heat dissipation. In this paper, the thermal gap pad is applied to the contact between the PCB-based solar panel and the aluminum stiffener mounted on the outside of the panel. Thus, the heat transfer from the solar cell to the rear side of the panel is facilitated. It maximizes the heat dissipation performance while maintaining the merits of PCB panel, and thus, it is possible to improve the power generation efficiency from reducing the temperature of the solar cell. The effectiveness of the thermal design of the 6U cubesat's deployable solar panel using the thermal gap pad has been verified through on-orbit thermal analysis based on the results, compared with the conventional PCB-based solar panel.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.385-396
• /
• 2001

The purpose of this experiment was to examine the histological changes and the pattern of expression of proliferating cell nuclear antigen(PCNA) and type I collagen in the elongated bone affected by osteodistraction of the mandibular body in an adult canine model. Seven adult male mongrel dogs weighing over 20kg were used for this experiment. The author excluded 3 animals because they died before the planned time of sacrifice. The custom-made linear extraoral device and 4 bicortical fixation screws 2.3mm in diameter, 50mm in total length, 15mm in screw length were used in each animal. The distal part of the distractor produced a 0.75mm gap between proximal and distal bony segments every $360^{\circ}$ turn of the rotation rod of the device. The mandibular body of the right side from each animal was experimental side and the left side was left intact and served as control. At the experimental side, the mandibular body was osteotomized. After 5-day latency period, the segments were distracted with a rate of 1.1mm/day and a rhythm of two/day for ensuing 7 days. The animals were sacrificed at the 4th. 17th, and 32th day after the end of the distraction. The bony specimens were decalcified, embedded in paraffin, sectioned $5{\mu}m$ thick and stained with Masson trichrome and examined under the light microscope. The immunohistochemical examinations using anti-PCNA antibody and anti-type-I collagen antibody were performed to examine the pattern of the expression of PCNA and type I collagen, respectively. Results : 1. The mean increment of the distance between the proximal and distal screw-holding parts of the distractor was 6.8mm. The average elongation of the mandible in the experimental side was 5.3mm. The loss of elongation was 1.5mm in average. 2. New bone was already observed at the 4th. day after the end of distraction. But, bony union was not completed in the distraction gap at the 32th. day after the end of distraction by radiographic and microscopic examinations. 3. The expression rate of PCNA positive cells in the distraction gap had a tendency of decrease from 35.1-68.8% initially, to 49.1%, and finally to 17.6-27.2%. But at the final period, the tissue of the elongated gap still had the ability of cell proliferation. On the other hand, the expression of PCNA positive cells in the control side were negligible through the experimental period. 4. PCNA positive cells were observed primarily both at the central fibrous zone and at the region of just adjacent to CFZ which initiated new bone formation. 5. The expression pattern of the type I collagen was not zone-specific. They were observed diffusely throughout the elongation gap. 6. The predominant mechanism of new bone formation in the distraction gap was intramembranous. But, some of the regenerated bone was formed by endochondral ossification.

• Journal of information and communication convergence engineering
• /
• v.14 no.1
• /
• pp.26-34
• /
• 2016

The alignment of DNA sequences is one of the important processes in the field of bioinformatics. The Smith-Waterman algorithm (SWA) performs optimally for aligning sequences but is computationally expensive. Field programmable gate array (FPGA) performs the best on parameters such as cost, speed-up, and ease of re-configurability to implement SWA. The performance of FPGA-based SWA is dependent on efficient cell-basic implementation-unit design. In this paper, we present an optimized systolic cell design while avoiding oversimplification, very large-scale integration (VLSI)-level design, and direct mapping of iterative equations such as previous cell designs. The proposed design makes efficient use of hardware resources and provides portability as the proposed design is not based on gate-level details. Our cell design implementing a linear gap penalty resulted in a performance improvement of 32× over a GPP platform and surpassed the hardware utilization of another implementation by a factor of 4.23.

• Journal of Plant Biotechnology
• /
• v.43 no.4
• /
• pp.405-410
• /
• 2016

Auxins are essential in plant growth and development. The auxin-stimulated elongation of plant cells has been explained by the "acid-growth theory", which was proposed forty years ago. According to this theory, the auxin activates plasma membrane $H^+-ATPase$ to induce proton extrusion into the apoplast, promoting cell expansion through the activation of cell wall-loosening proteins such as expansins. Even though accepted as the classical theory of auxin-induced cell growth for decades, the major signaling components comprising this model were unknown, until publication of recent reports. The major gap in the acid growth theory is the signaling mechanism by which auxin activates the plasma membrane $H^+-ATPase$. Recent genetic, molecular, and biochemical approaches reveal that several auxin-related molecules, such as TIR1/AFB AUX/IAA coreceptors and SMALL AUXIN UP RNA (SAUR), serve as important components of the acid-growth model, phosphorylating and subsequently activating the plasma membrane $H^+-ATPase$. These researches reestablish the four-decade-old theory by providing us the detailed signaling mechanism of auxininduced cell growth. In this review, we discuss the recent research progress in auxin-induced cell elongation, and a set of possible future works based on the reestablished acid-growth model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.293-294
• /
• 2009

We proposed a novel single gap transflective liquid crystal display (LCD) using liquid crystal with negative dielectric anisotropy. We designed cell structure driven by fringe electric field in the transmissive (T) part and vertical electric field in the reflective (R) part. In the device, high surface pretilt angle of the LC in the R-part is achieved through polymerization of an UV curable reactive mesogen (RM) monomer at surfaces. By optimizing the parameters, a newly developed transflective display has characteristics such as single gap and single gamma curve.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.461-466
• /
• 2007

There has been a great interest in printing technology as a low cost and mass production method for the application of printed electronics such as printed TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatuses of gravure-offset printing are developed for fine line-width/gap printing and examining pattern distortion occurred in gravure-offset printing process. The fine line-width/gap pattern shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. Pattern distortion is modeled, and the amount and shape of the distortion are calculated by using commercial FEM code. The roll-to-roll printing system under development consists of unwinder/rewinder, two printing units, one coating unit, drying units, guiding unit, vision system, and other auxiliary devices. For multi-layer printing, the system is designed to be capable of printing two different materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.312-313
• /
• 2008

A transflective liquid crystal displays associated with fringe field switching (FFS) mode of new concept is proposed. The device utilizes unique characteristic of the FFS mode in which the rotation angle of LC director is strongly dependent on electrode position in on state. We use the liquid crystal with negative dielectric anisotropy. Also we are look for optimized electrode size and the optimization of pixel electrode width and distance between them, the LC director could rotate about $22.5^{\circ}$ and $45^{\circ}$ depending on electrode positions. Consequently, we get high transmittance and high reflection on the optimized electrode condition. Respectively, a high image quality transflective display with single gap and single gamma characteristics realized.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1706-1711
• /
• 2013

This paper presents the filter of a resonator comprising a shorted open gap ring(SOGR) and interdigital lines. The proposed filter has the ultra wideband characteristic operating from 3 GHz to 10.5 GHz. In order to achieve the remarkable improvement in the size-reduction of the overall filter structure, only one cell of the SOGR with the inter-digital lines is adopted. It is shown that this filter has the size of $18mm{\times}15mm$ using a metamaterial, the fractional bandwidth over 100%, the insertion loss much less than 1dB, an acceptable return loss performance in the results.