• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1380-1381
• /
• 2011

본 논문에서는 SILVACO 사의 ATHENA와 ATLAS를 이용하여 후면 전극 실리콘 태양전지 (back contact silicon solar cell)의 전면 텍스쳐링 (texturing) 깊이 (depth)와 텍스쳐링 간격 (gap)에 따른 태양전지 효율(efficiency)에 미치는 영향을 분석하였다. 제안한 후면 전극 실리콘 태양전지는 (100) silicon wafer(n-type, $6{\times}10^{15}\;cm^{-3}$)을 기반으로 전면부에 텍스쳐링을, 후면부에 BSF(back surface field, $1{\times}10^{20}\;cm^{-3}$)와 에미터(emitter, $8.5{\times}10^{19}\;cm^{-3}$)를 구성하고, 셀간 피치를 1250 ${\mu}m$, BSF와 에미터의 간격을 25 ${\mu}m$으로 한 구조이다. 텍스쳐링 간격이 없이 텍스쳐링 깊이를 0 ${\mu}m$에서 150 ${\mu}m$으로 증가시켜 분석한 결과, 텍스쳐링 깊이가 증가할수록 효율이 23.90%에서 25.79%로 증가하였다. 텍스쳐링 간격을 1 ${\mu}m$에서 100 ${\mu}m$으로 증가시켜 분석한 결과, 텍스쳐링 깊이와 상관없이 텍스쳐링 간격이 증가할수록 후면 전극 실리콘 태양전지의 효율이 감소하였다. 텍스쳐링 유무에 따라 후면 전극 태양전지의 외부양자효율의 차이를 보였고 텍스쳐링이 있을 때 외부양자효율이 보다 높은 값을 얻었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.51-52
• /
• 2008

A single gap transflective liquid crystal display(LCD) driven by fringe electric field in the transmissive(T) region and vertical electric field in the reflective(R) region was designed. Because the pretilt angle is formed in $53^{\circ}$ through polymerization of an UV curable reactive mesogen(RM) monomer at the surface, the effective cell retardation $(d{\Delta}n_{eff})$ value of the R region becomes half of that in the T region where the LCs are homogenously aligned. Consequently, a transflective display driven by a vertical and fringe electric field with a single cell gap and single gamma curves is realized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1533-1536
• /
• 2006

A novel single cell gap transflective liquid crystal display was developed. By using the ink jet printing technology, we fabricated a transflective liquid crystal display with the hybrid alignment in the reflective region and the homogeneous alignment in the transmission region. Compared with the traditional technologies, our technology provided the advantages of easy process, high yield, fast throughput, and less material usage. We also applied this technology to the 2.4 inch prototype. This panel could be implemented in the handheld product applications.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.270-273
• /
• 2007

In this report, Indium-free and Indium-reduced thin film materials for solar absorber were studied in order to search alternative materials for thin film solar cell. The films of $Cu_2ZnSnSe_4$ and $Cu_2ZnSnSe_2$ were deposited using mixed binary chalcogenides powders. From the film bulk analysis result, it is observed that Cu concentration is a function of substrate temperature as well as CuSe mole ratio in the target. Under optimized conditions, $Cu_2ZnSnSe_4$ and $Cu_2ZnSnSe_2$ thin films grow with strong (112), (220/204) and (312/116) reflections. Films are found to exhibit a high absorption coefficient of $10^4$ $cm^{-1}$. $Cu_2ZnSnSe_4$ film shows a 1.5 eV band gap. On the other side, an increasing of optical band gap from 1.0 eV to 1.25 eV ($CuInSnSe_2$) is found to be proportional with an increasing of Zn concentration. All films have a p-type semiconductor characteristic with a carrier concentration in the order of $10^{14}$ $cm^{-3}$, a mobility about $10^1$ $cm^{2{\cdot}-1.}S^{-1}$ and a resistivity at the range of $10^2-10^6$ ${\Omega}{\cdot}m$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.36-39
• /
• 2014

MFC(microbial fuel cell) is the device to produce the electricity by using the microbes which are living in the waste water. In this paper, the electric characteristics of the MFC were investigated according to each different structure and electrode materials. The voltage being reversed phenomenon was observed in the MFC which uses the cupper plate as the cathode material. This result comes from the oxidation reaction of the cupper plate electrode in this MFC. And this MFC has lower output voltage than one that has a platinum plate electrode. The smaller gap distance of the cupper plate electrode of the MFC showed the higher output voltage. The larger electrode area of the cupper plate electrode showed that the reaching time of the output voltage to the maximum value was delayed.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1303-1310
• /
• 2006

In oriental medicine, Samul-tang (SMT) has been used for the treatment of cardiovascular diseases and neuronal disorders. Here, possible effects of SMT on axonal regeneration after the spinal cord injury were examined. SMT treatment induced increases in regeneration-related proteins GAP-43, cell division cycle 2 (Cdc2) and phospho-Erk1/2 in the peripheral sciatic nerves after crush injury. Increased levels of Cdc2 and phospho-Erk1/2 were observe mostly in the gray matter area and some in the dorsomedial white matter. These increases correlated with increased cell numbers in affected areas. Moreover, axons of corticospinal tract (CST) showed increased sprouting in the injured spinal cord when administrated with SMT compared with saline-treated control. Thus, the present data indicate that SMT may be useful for identifying active components and for therapeutic application toward the treatment of spinal cord disorders after injury.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.183-188
• /
• 2008

Satellite DMB(Digital Multimedia Broadcasting) uses the Cap Filler(GF) that provides a service to the wave shade area of the satellite signal that is a non-line of sight area. The GF is the repeater and the Satellite DMB Systems certainly must construct the GF Network toguarantee the movement reception of the terminal. As the coverage of the GF is formed the Cell or Sector, when the multiple GF is established to be contiguous, the problem of the interference will be able to occur. This paper describes the Satellite DMB system and the GF, and it investigate the design fundamentals plan of the GF Network that it will be able to reduce this problem. As a result, in case of the distance that GF and terminal unit is above 4.6Km, service is not provided because of quality degradation according to mutual interference.

• Journal of Embryo Transfer
• /
• v.28 no.1
• /
• pp.25-30
• /
• 2013

The aim of this study was to estimate of ovulation time and parturition day at the same time as breeding in small dog by vaginal cytology and to confirm the accuracy by comparing the expected parturition day and the real one. Characteristic features of vaginal cytology during the estrous cycle were the high proportion of large intermediate cell, superficial cell, anuclear cell and erythrocyte in proestrus, superficial cell and anuclear cell in estrus, parabasal cell, small intermediate cell, large intermediate cell and leukocyte in diestrus, parabasal cell and small intermediate in anestrus, respectively. When day 0 was the parturition day, the period of pregnancy is 67.45(64~75) days when the cornification index (CI) is over 90%. Also, on the basis of ovulation day, 63.65(59~66) days was confirmed, and 57.0(52~60) days was confirmed based on the first day of diestrus. There are the gap of 4 days between the day being over 90% in CI and ovulation day. On the basis of this, when expecting parturition day based on the day being over 90% in CI by vaginal cytology, 18.1% was produced in the same of the expected parturition day and the real one, 30.3% and 33.3% were produced in the gap of one day and two days, respectively so, the accuracy within two days was 81.7%. In addition, based on the first day of diestrus, it also was identified to 81.7% as the difference between the expected parturition day and the real one within 2 days. It demonstrated there are any difference between any expected parturition day by vaginal cytology. Thus on the basis of the day of being over 90% CI, it is fully thought to using clinically due to the possibility of prediction the parturition day at the same time as the determination of the proper time of the optimal mating time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.941-948
• /
• 2016

Textile composite materials have been widely applied in aerospace structures due to their various advantages such as high specific stiffnesses and strengths, better out-of-plane performances, impact and delamination resistances, and net shape fabrications. In this paper, a modified geometric model of repeating unit cell (RUC) is suggested based on the Naik's model for 2D plain weave textile composites. The RUC geometry is defined by various parameters. The proposed model considers another parameter which is a gap length between adjacent yarns. The effective stiffnesses are predicted by using the yarn slicing technique and stress averaging technique based on iso-strain assumption. And the stiffnesses of RUC are evaluated by adjusting the gap ratio and verified by comparing with Naik's model and experimental data for 2D plain weave composite specimens.

• Biomedical Science Letters
• /
• v.12 no.4
• /
• pp.311-318
• /
• 2006

The GJB2 mutation is mostly recessive in non-syndromic hearing loss, but specific mutations display a dominant type and syndromic hearing impairment. Both U54K and R75Q mutations present a dominant type in pedigrees with associated skin disorders. The purpose of this study was to investigate whether two GJB2 mutations can exhibit a dominant-negative effect on the growth abrogation and the gap junctional intercellular communication capacity exerted by wild-type connexin 26. A specific mutant region of GJB2 showed a loss of gap junction activity and a dominant negative effect on wild-type GJB2. The two mutants exerted a dominant-negative effect on the GJIC capacity and have independently effected GJB2 regulated growth of Hela cells; however, they have no dominant-negative growth effect on wild-type GJB2. It is proposed that the different mechanisms of the dominant-negative effect on wild-type GJB2 involve cell growth and GJIC function. This study describes mutations found in Korean deaf patients and that are typical of other east Asian regions.