• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.388-389
• /
• 2007

A transflective liquid crystal displays driven by fringe field switching mode of new concept is being suggested. The FFS mode is known to have the different twist angle distribution at the position when an operating voltage is applied. We make the cell design by using the different twist angle which has some region decided on transmissive region and other region used to reflective region. By optimizing simulation condition in the concept, we proposed new tansflective LCDs using FFS mode with single gap and single gamma characteristics.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.96-102
• /
• 2008

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology, with low cost and high productivity, can make it possible to produce printed electronics such as TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatus of gravure-offset printing are developed for fine line-width/gap printing and the results obtained from the apparatus shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. The printing results obtained from the system shows around 30 micro-meter line-width/gap printing patterns.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.375-383
• /
• 2021

We present a simulation method to design antireflection coating (ARCs) for fiber-coupled superconducting nanowire single-photon detectors. Using a finite-element method, the absorptance of the nanowire is calculated for a defined unit-cell structure consisting of a fiber, ARC layer, nanowire absorber, distributed Bragg reflector (DBR) mirror, and air gap. We develop a method to evaluate the uncertainty in absorptance due to the uncontrollable parameter of air-gap distance. The validity of the simulation method is tested by comparison to an experimental realization for a case of single-layer ARC, which results in good agreement. We show finally a double-layer ARC design optimized for a system detection efficiency of higher than 95%, with a reduced uncertainty due to the air-gap distance.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.192-197
• /
• 2017

Hydrogenated Amorphous Silicon (a-Si:H) is used as an emitter layer in HIT (heterojunction with Intrinsic Thin layer) solar cells. Its low band gap and low optical properties (low transmittance and high absorption) cause parasitic absorption on the front side of a solar cell that significantly reduces the solar cell blue response. To overcome this, research on CSC (carrier Selective Contacts) is being actively carried out to reduce carrier recombination and improve carrier transportation as a means to approach the theoretical efficiency of silicon solar cells. Among CSC materials, molybdenum oxide ($MoO_x$) is most commonly used for the hole transport layer (HTL) of a solar cell due to its high work function and wide band gap. This paper analyzes the electrical and optical properties of $MoO_x$ thin films for use in the HTL of HIT solar cells. The optical properties of $MoO_x$ show better performance than a-Si:H and ${\mu}c-SiO_x:H$.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.639-643
• /
• 2011

Zinc oxide as an optoelectronic device material was studied to utilize its wide band gap of 3.37 eV and high exciton biding energy of 60 meV. Using anti-site nitrogen to generate p-type zinc oxide has shown a deep acceptor level and low solubility. To increase the nitrogen solubility in zinc oxide, group 13 elements (aluminum, gallium, and indium) was co-added to nitrogen. The effect of aluminum on nitrogen solubility in a $3{\times}3{\times}2$ zinc oxide super cell containing 72 atoms was investigated using density functional theory with hybrid functionals of Heyd, Scuseria, and Ernzerhof (HSE). Aluminum and nitrogen were substituted for zinc and oxygen sites in the super cell, respectively. The band gap of the undoped super cell was calculated to be 3.36 eV from the density of states, and was in good agreement with the experimentally obtained value. Formation energies of a nitrogen molecule and nitric oxide in the zinc oxide super cell in zinc-rich conditions were lower than those in oxygen-rich conditions. When the number of nitrogen molecules near the aluminum increased from one to four in the super cell, their formation energies decreased to approach the valence band maximum to some degree. However, the acceptor level of nitrogen in zinc oxide with the co-incorporation of aluminum was still deep.

• Composites Research
• /
• 제37권1호
• /
• pp.7-14
• /
• 2024

이중 롤러는 Gap block 설계에 따라 동일한 크기와 하중 조건에서도 다양한 변형 양상을 가질 수 있다. 이러한 특성을 활용하여, 본 연구에서는 제품 이송 과정에서 발생되는 주름과 같은 결함을 최소화하기 위한 Carbonfiber reinforced plastic (CFRP) 이중 롤러의 Gap block 설계 방법을 제안한다. 가장 먼저, Gap block에 대한 주요 설계 변수와 공정 정밀도를 고려한 분석 case들을 선정하고, 유한 요소 해석을 활용하여 CFRP 이중 롤러의 변형 양상을 추출한다. 여기서, 본 연구의 목적을 만족하는 최적의 Gap block 설계를 수행하기 위해, 제품과 롤러가 접촉하는 지점들 간의 변형 편차에 기반하여 CFRP 이중 롤러의 변형 양상들을 비교 분석한다. 그 결과, 본 연구에서 제안한 Gap block 설계 방법을 통해, 롤러의 직경 또는 길이와 같은 전체적인 크기 변화없이 제품 이송 시 결함을 크게 감소시킬 수 있는 최적화된 CFRP 이중 롤러를 구축할 수 있었다.

• Rapid Communication in Photoscience
• /
• 제3권3호
• /
• pp.59-60
• /
• 2014

The trans-$A_2B_2$ porphyrin and Ni-porphyrin derivatives were synthesized by Suzuki coupling of bromoporphyrin with arylborate as a key step. The band gaps of those complexes were measured from their absorption, emission and cyclic voltammetric data. All the LUMO energy level of porphyrin derivatives is lower than that of P3HT, and the HOMO energy level is evaluated higher than the HOMO of PCBM.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1092-1095
• /
• 2003

A driving mechanism and excellent features for an in-plane switching twisted nematic liquid crystal mode (IT mode) that could possibly improve the viewing-angle and color shift characteristics and the cell gap error tolerance is proposed. .It is important that the surface azimuthal anchoring strength of the liquid crystal cell differs at the upper and lower substrates. Furthermore. as a rubbing-free LCD. amorphously aligned in-plane switching twisted nematic mode (a-IT mode) is also demonstrated.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2002년도 Current Trends in Toxicological Sciences
• /
• pp.75-75
• /
• 2002

Two types of normal human breast epithelial cells (HBECs) have already been established and characterized. Type I HBECs are deficient in gap junctional intercellular communication and are capable of anchorage-independent growth and of expressing luminal epithelial cell markers, a variant estrogen receptor (ER), and stem cell characteristics.(omitted)

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.226-229
• /
• 2003

본 논문은 Wireless LAN 주파수 대역$(5725\~5825\;MHz)$에서의 다차원패턴기술(Photonic Band Gap : PBG)을 이용한 Yagi-Uda 안테나와 결합하여 광대역 마이크로스트립 패치 안테나를 구현 하였으며, PBG Cell을 이용한 안테나와 이용하지 않은 안테나를 비교 분석하였다. PBG 구조를 적용한 안테나에서의 대역폭이 약 30 MHz 정도 더 넓게 나왔으며, 안테나의 이득은 -1dB정도 더 낮게 나왔는데 이는 Ground 면에 2차원적인 PBG Cell을 적용한 효과 때문으로 분석된다.