• KIEAE Journal
• /
• v.3 no.2
• /
• pp.37-44
• /
• 2003

The aim of this study was to analyze the thermal performance through Test-Cell of TI-wall in domestic climate. This study was carried out as follows: 1) The TI-wall was studied for ability to reduce heat loss through the building envelope and analyzed to TIM properties. 2) Test models of TI-wall were designed through the investigation of previous paper and work, measured for winter and spring, and the thermal effects were analyzed. The type of the TIM used in test model is small-celled(diameter 4mm and thickness 50mm) capillary and cement brick(density $1500kg/m^3$) was used by thermal mass. 3) Test-cell of TI-wall was calibrated from measured data and the dynamic simulation program ESP-r 9.0. In these simulations, the measured climate conditions of TaeJon were used as outdoor conditions, and the simulation model of Test-cell was developed. 4) The sensitivity analysis is executed in various aspects with standard weather files and ESP-r 9.0, and then most suitable system of TI-wall are predicted. Finally, The suitable system of TI-wall was analysed according to sizes of air gap, kinds, thickness, and the surface absorption of therm wall. The result is following. In TI-wall, Concrete is better than cement brick, at that time the surface absorption is 95%, and the most efficient thickness is 250mm. As smaller of a air gap, as reducer of convection heat loss, it is efficient for heating energy. However, ensuring of a air gap at least more than 50mm is desirable for natural ventilation in Summer.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.12
• /
• pp.2056-2060
• /
• 2007

Transcription factor GATA-3 is the critical transcription factor for Th2 cell differentiation. In spite of its importance in Th2 cell differentiation, the molecular mechanism for its action in Th2 differentiation is poorly understood. Previous studies have suggested that GATA-3 may be involved in the chromatin remodeling in the Th2 cytokine locus. To determine whether GATA-3 exerts its effect on its target sites in the extrachromosomal status, cell transfection assay was performed. In this assay, 800 bp IL4 promoter-luciferase constructs linked with GATA-3 target sites were transfected into the M12 B cell line, D10 mouse Th2 cell lines, and human T lymphoma Jurkat cell lines with or without the GATA-3 expression vector. The GATA-3 effects on its target sites were minimal in the extrachromosomal status, supporting the previous propositions that GATA-3 functions at the chromatin level by remodeling chromatin structure.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.355-358
• /
• 2009

This paper presents the technology of selective emitter for high efficiency crystalline silicon solar cell. The effect of selective emitter is analyzed by using the simulation program for solar cell, PC1D. The selective emitter shows better spectral response in short wavelength regions compared to homogeneous emitter. Therefore, the efficiency of solar cell with selective emitter can be improved by changing the sheet resistance from 60 $\Omega/\square$ to 120 $\Omega/\square$. In addition, the power loss of solar cell can be minimized by optimizing width and gap of the finger electrodes on the selective emitter.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.64.1-64.1
• /
• 2011

다중접합 태양전지는 흡수대역이 다른 juntion으로 구성되어, 각각의 태양전지 간의 전류정합(current matching)이 효율 향상에 중요하다. 본 실험에서는 Top cell에 i-a-Si:H(Thinckness:100nm), Middle cell에는 i-a-SiGe:H(Thickness:800nm)을 적용하였고, bottom cell에는 i-${\mu}c$-Si:H(Thickness:1800nm), 수광부의 p-layer에 에 SiOx을 이용하여 triple juntion amorphous silicon solar cell(삼중접합태양전지)을 구현하였다. 이를 최적화 시키기 위해 ASA simulation을 이용하여 각 Cell의 intrinsic layer의 밴드갭을 가변하였다. 가변 결과 i-a-Si:H : 1.85 eV, i-a-SiGe:H: 1.6 eV, i-${\mu}c$-Si:H: 1.4 eV에서 태양전지 효율 14.5 %을 기록 하였다. 본 연구를 통해 Triple juntion cell에서의 intrinsic layer의 밴드갭 최적화를 구현해 볼 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.37-37
• /
• 2009

박막태양전지는 p-i-n substrate형과 n-i-p substrate형 두가지구조로 제조된다. 각 layer에서 activation energy와 band gap energy를 ASA simulator를 통해 조절해보았다. Simulation결과 p-i-n substrate형에서 p-layer와 n-i-p substrate형 n-layer에서 동일하게 activation energy 0.2eV, band gap energy 1.80eV에 최고효율 나왔고 각각 10.07%, 10.17%의 최고효율을 구할 수 있었다. 최적화 과정을 통하여 같은 조건에서 p-i-n substrate형 보다 n-i-p substrate형이 보다 높은 효율을 낸다는 것을 알 수 있었으며 본 연구를 통해 각 구조의 차이를 알 수 있었고 이는 높은 효율의 박막태양전지 설계에 도움이 될 것 이다.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.546-557
• /
• 2017

In a long term evolution-advanced (LTE-A) system, the traffic overload of machine type communication devices is a challenge because too many devices attempt to access a base station (BS) simultaneously in a short period of time. We discuss the challenge of the gap between the theoretical maximum throughput and the actual throughput. A gap occurs when the BS cannot change the number of preambles for a random access channel (RACH) until multiple numbers of RACHs are completed. In addition, a preamble partition approach is proposed in this paper that uses two groups of preambles to reduce this gap. A performance evaluation shows that the proposed approach increases the average throughput. For 100,000 devices in a cell, the throughput is increased by 29.7% to 114.4% and 23.0% to 91.3% with uniform and Beta-distributed arrivals of devices, respectively.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.220-222
• /
• 2003

In this paper, we analyze on the discharge characteristics through 1-D simulations in an at plasma display panel discharge cell. The model is based on a Poisson' equation, continuity and drift-diffusion equation. Results are presented in a 95% neon, 5% xenon gas mixture, for a gap length of 100us and a gas pressure of 400Torr at ambient temperature. Results for other gap length are also discussed. As a result, an increase of the gap cause increase of luminous efficiency but with larger sustaining voltage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.261-267
• /
• 2008

One of the most important issues in fence-type PDP is low luminance and luminous efficiency. To improve luminance and luminous efficiency, new sustain electrode structure which contains long discharge gap is necessary. However, it causes rise of firing voltage. In this paper, a new fence electrode structure is proposed in order to solve these problems. To drop the firing voltage, tow hump shaped electrodes is added on the main discharge electrode, and distance between two humps is controlled. The experimental results show that the test panel with the narrow horizontal gap(40um) between two humps shows low firing voltage by 17V compared with 80um gap in spit of similar luminance and luminous efficiency.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.378-381
• /
• 2015

To produce low cost and efficient photovoltaic cells, inorganic-organic lead halide perovskite materials appear promising for most suitable solar cells owing to their high power conversion efficiency. Most recent research showes that formamidinium lead iodide ($FAPbI_3$) with methylammonium lead bromide ($MAPbBr_3$) improves the power conversion efficiency of the solar cell to more than 18 per cent under a standard illumination because incorporated $MAPbBr_3$ makes $FAPbI_3$-relatively unstable but comparatively narrow band gap-more stable composition. In respect to first principle study, we investigated band gap of $MAPbI_3$, $FAPbI_3$, $MAPbBr_3$, $(FAPbI_3)_{0.89}-(MAPbBr_3)_{0.11}$ and 0.615(eV), 0.466, 1.197, 0.518 respectively through EDISON DFT software. These results emphasize enhancing structure stability is important factor as well as finding narrow band gap.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.123-126
• /
• 2007

In this study, a high luminous efficacy AC-PDP panel with long discharge gap and grooved dielectric layer has been studied. By applying this high efficacy concept and optimized driving waveform featuring negative biased sustain, ${\sim}2.6lm/W$ of luminous efficacy was achieved in 42- inch HD panel. Modified fabricating process and new discharge cell structure were investigated to obtain improved uniformity and operating characteristics.