• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1330-1332
• /
• 2007

We have newly developed transflective LCDs with a specific sub-pixel and the single cell gap structure. In our structure, the overall transmittance and reflectance has become higher than typical transflective LCDs. Furthermore, it can simplify the fabrication process of the transflective LCDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.743-746
• /
• 2006

We have demonstrated a transflective liquid crystal display (LCD) with a single cell gap in a patterned vertically aligned mode. In our configuration, the different electrode structure in a transmissive and a reflective part was suggested to compensate an optical path difference of each region. As the result, the similar electro-optic characteristic of each region was obtained which results in an enhanced performance of the device. Moreover, suggested technique can be highly effective to realize the practical transflective LCD due to the simple fabrication process.

• Transactions on Electrical and Electronic Materials
• /
• 제4권2호
• /
• pp.10-14
• /
• 2003

Flexible displays such as plastic-based liquid crystal displays (LCDs) and organic light-emitting diode displays (OLEDDs) have been researched and developed at KETI since 1997. The plastic film substrate is very weak to heat and pressure compared to glass substrate, that its fabrication process is limited to 110$^{\circ}C$ and low pressure. The ITO films were deposited on the bare plastic film substrate by rf-magnetron sputtering. Moreover, in order to maintain uniform cell gap and pressure on the plastic film substrate, we utilized newly-invented jig and fabrication process. Electro-optical characteristics were better than or equivalent to those of typical glass LCDs though it is thinner, lighter-weight, and more robust than glass LCDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.502-505
• /
• 2005

The modeling for the cell gap process characteristic on the flexible liquid crystal display (LCD) process was investigated by response surface methodology (RSM). D-optimal design is carried out to build the design matrix. The analysis of variance (ANOVA) technique was used to analyze the significance level. The statistical analysis was used to verify the response surface model. The desirability function was used in the design-space optimization.

• 한국표면공학회지
• /
• 제37권4호
• /
• pp.191-195
• /
• 2004

Gallium or sulphur additions in $CuInSe_2$ were prepared using RF magnetron sputtering and pulsed laser deposition respectively. All of the observed thin films shows a chalcopyrite structure with the S and Ga addition increases the favourable (112) peak. The optical absorption coefficients were slightly decreased. The energy band gap of films could be shifted from 1.04 to 1.68 eV by adjusting the mole ratio of S/(S+Se) and Ga/(In+Ga). It is possible to obtain the optimum energy band gap by adding S or Ga solute at a certain ratio in favour of Se and In respectively. It is also necessary to control the ratio of Ga and S additions and to retain a certain portion of In and Se to provide better properties of thin films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1564-1567
• /
• 2009

Cu(In,Ga)$Se_2$ (CIGS) thin films were formed using CIGS bulk by electron-beam evaporation method with an evaporation current from 20 mA to 90 mA. The experimental results showed that the chemical compositions and the properties of CIGS films varied with the different evaporation current. The Cu-rich CIGS film was deposited successfully with a band gap of 1.20 eV when the evaporation current was 90 mA.

• 항공우주시스템공학회지
• /
• 제14권4호
• /
• pp.25-31
• /
• 2020

The development of manufacturing technology for braided composites has led to farther extension of the applications in aerospace structures. Since the mechanical characteristics of braided composites are affected by various materials and manufacturing parameters, it is important to determine the parameters required to appropriately design the braided composite structures. In this study, we proposed a geometric model of RUC (repeating unit cell) for 2D braided composites, and predicted the mechanical properties according to the change of fiber volume fraction, fiber filament size, braiding angle, and gap between adjacent yarns by the yarn slicing technique and stress averaging method. Finally, we analyze the characteristics of mechanical properties according to each manufacturing parameter of the braided composite material.

• 전자공학회논문지A
• /
• 제29A권3호
• /
• pp.66-71
• /
• 1992

We fabricated highly stable a-Si:H solar cell using low band gap intrinsic layer fabricated by RP-CVD. We obtained a-Si:H with optical band gap of less than 1.65 eV with deposition rate of 0.18 $\AA$/sec, and used this material as bottom i-layer of a-Si:H double stacked solar cells. We have succeeded in the fabrication of very stable a-Si:H double stacked solar cell of which the conversion efficiency is about 9% and the degradation is less than 4% after light illumination for 100h under 350mW/cm$^{2}$.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.65-71
• /
• 2011

Properties of each layer in DSSC were investigated to improve solar cell characterstics. Also in this study, low costsolar simulator system is fabricated and used. Efficiency of DSSC is better in the case of thinner semiconductive layer, because thick semiconductive layer is acted as resistor. Sc-doped ZnO thin films showed better electrical property by proper donor doping effect. Among the dyes, DSSC containing N719 showed higher efficiency, because N719 have smaller electron affinity and shallow band gap.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.66-67
• /
• 2007

We have developed reflective information display using opposite-charged two particles. An appropriate amount of both the yellow and the black powers are putted between the ITO patterned glass substrate separated with cell gap. The rib maintains the cell gap and prevents the interference between the pixels. When a negative voltage is applied to the upper ITO electrode, the positively charged black powder moves to the upper electrode viewing a black appearance. In case of positive voltage is applied to this electrode white particle is observed. So we analyzed the electrical and optical properties of our charged particle type display panel.