• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.131-135
• /
• 2003

Callus and cell suspension cultures of Eurycoma longifolia Jack were initiated from leaves of different trees. The leaf explant of tree Eu9 produced the most calli and also induced high cell biomass in the cell suspension culture. Optimum production of cell biomass could be initiated in proliferating culture medium with a pH of 5.75 prior to autoclaving. The effects of macronutrient inorganic salts of Murashige and Skoog (MS) liquid medium supplemented with X on production of cell biomass of Eurycoma longifolia were also investigated. The highest cell biomass was produced in MS medium containing macronutrients of $21\;mM\;NH_4NO_3,\;12.25\;mM\;KNO_3,\;3.00\;mM\;CaCl_2.2H_2O,\;0.575\;mM\;MgSO_4.7H_2O$, and $1.83\;mM\;KH_2PO_4$. A new medium labeled as TAM was formulated for the production of Eurycoma longifolia cell biomass in the cell suspension culture.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.1114-1118
• /
• 2015

Microbial fuel cells (MFCs) have gathered attention as a novel bioenergy technology to simultaneously treat wastewater with less sludge production than the conventional activated sludge system. In two different operations of the MFC and aerobic process, microbial growth was determined by the protein assay method and their biomass yields using real wastewater were compared. The biomass yield on the anode electrode of the MFC was 0.02 g-COD-cell/gCOD-substrate and the anolyte planktonic biomass was 0.14 g-COD-cell/g-COD-substrate. An MFC without anode electrode resulted in the biomass yield of 0.07 ± 0.03 g-COD-cell/g-CODsubstrate, suggesting that oxygen diffusion from the cathode possibly supported the microbial growth. In a comparative test, the biomass yield under aerobic environment was 0.46 ± 0.07 g-COD-cell/g-COD-substrate, which was about 3 times higher than the total biomass value in the MFC operation.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.337-341
• /
• 2000

The decanter is very useful to harvest biomass from plant cell cultures in large-scale process. It is very important to obtain high yield and low moisture content in recovered biomass so as to minimize solvent usage in subsequent extraction steps. Effluent clarity was also affected by the differential speed although this affect was more dramatic at higher flow rates than at lower flow rates. Moisure content was largely unaffected by flow rate. A decrease in moisture content was evident as differential speed decreased.

• ALGAE
• /
• v.19 no.2
• /
• pp.149-151
• /
• 2004

Freshwater algae make up a very important portion of the autotrophic component of the aquatic food web. Therefore, the study of freshwater algal structure and biomass is central to aquatic ecosystem studies. Due to variations in cell shape and size for each species (or taxon) and survey site, cell abundance (or cell numbers per chosen volume) often leads to misrepresentation of the true importance of some species because of the great differences in size of various algae. Thus, it is necessary to investigate the freshwater algal species of a site in order to calculate the cell volume. Although direct cell counting, species volume measurement, as well as biomass calculation are time-consuming and requiring specialists in taxonomy.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.346-351
• /
• 2000

Several solvents or combinations of solvents were tested for the extraction of wet or dried biomass at different extraction mode from plant cell cultures. Methanol gave the highest paclitaxel recovery with the least amount of solvent usage. before extraction drying of biomass wass helpful to decrease solvent usage in extraction step./ in this case drying method was very important to obtain high yield from dried biomass. In thid mode of operation counter-current extraction process can be able to decrease solvent usage but paclitaxel recovery was almost same with both batch and counter-current mode of operation. The number of extraction times was at least four to obtain high yield(>99%) from cell and one to obtain highyield(>96%) from cell debris in batch mode. Equilibrium (i.e. the ratio of paclitaxel in biomass to paclitaxel in the extraction solvent) was reached within 5 minutes. The minimum methodal concentration (90%) and solvent amount(biomass : solvent=1 Kg : 1L) are enough to obtain high yield(>98%) for extraction from biomass.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.125-130
• /
• 2004

Callus and cell suspension cultures of Eurycoma longifolia Jack could be an alternative supply of 9-hydroxycanthin-6-one and 9-methoxycanthin-6-one. The callus tissues were initiated from leaves of different trees. The friable calli were used for the preparation of the cell suspension cultures of E. longifolia. The leaf explant of tree Eu-9 produced the most callus and also induced high cell biomass in the cell suspension culture, but it produced low quantity of 9-methoxycanthin- 6-one and 9-hydroxycanthin-6-one. The leaf explant from tree Eu-8 produced low quantity of callus and cell biomass, but produced the highest quantity of 9-methoxycanthin- 6-one and 9-hydroxycanthin-6-one. Optimum production of cell biomass was obtained on cell culture medium with pH 5.75 prior to autoclaving, but high alkaloids content could be induced in culture medium in acidic condition with pH 4.75 and 5.25 prior to autoclaving.

• Journal of Korea Society of Waste Management
• /
• v.34 no.7
• /
• pp.685-696
• /
• 2017

This study focuses on computational particle fluid dynamics (CPFD) modeling for the fast pyrolysis of biomass in a conical spouted bed reactor. The CPFD simulation was conducted to understand the hydrodynamics, heat transfer, and biomass fast pyrolysis reaction of the conical spouted bed reactor and the multiphase-particle in cell (MP-PIC) model was used to investigate the fast pyrolysis of biomass in a conical spouted bed reactor. A two-stage semi-global kinetics model was applied to model the fast pyrolysis reaction of biomass and the commercial code (Barracuda) was used in simulations. The temperature of solid particles in a conical spouted bed reactor showed a uniform temperature distribution along the reactor height. The yield of fast pyrolysis products from the simulation was compared with the experimental data; the yield of fast pyrolysis products was 74.1wt.% tar, 17.4wt.% gas, and 8.5wt.% char. The comparison of experimental measurements and model predictions shows the model's accuracy. The CPFD simulation results had great potential to aid the future design and optimization of the fast pyrolysis process for biomass.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.1
• /
• pp.21-28
• /
• 1998

A total of 94 taxa were identified from the Southern Ocean, 140-148 $^{\circ}E$ and 40-53 $^{\circ}S$, as an early austral summer phytoplankton. They were 53 diatoms, 37 dinoflagellates, 2 silicoflagellates, 1 prymnesiophyte, and 1 coccolithophorid. Integrated cell numbers of nanoplankton dominated microphytoplankton from 8 stations, especially from Subantarctic zone, but integrated biomass was lower than microphytoplankton. Integrated cell numbers of diatoms dominated dinoflagellates, coccolithophorids, and prymnesiophyte, but integrated biomass of microphytoplankton were dependent to the biomass of dinoflagellates except north of the Subtropical convergence zone and south of the Antractic convergence zone. Phytoplankton community changed across the fronts and 3 different communities were observed. Fronts seem to influence on the phytoplankton community from the west Pacific Sector of the Southern Ocean.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.4
• /
• pp.409-411
• /
• 1998

The effects of iron and EDTA on the growth of Chlorella sp. KR-1, a highly$CO_2$tolerant fresh water micro alga, have been determined. The algal growth was significantly affected not only by iron concentrations in the medium but by the ratio of iron to EDTA. The linear growth rate and the final cell concentration are increased with the supplementation of EDTA. Enhanced growth of Chlorella sp. KR-1 by the supplementation of EDTA was mainly due to the fact that the supply of iron to the algal culture had been possible for a longer time. When Chlorella sp. KR-1 is cultured in the medium of iron-15H-EDTA, the linear growth rate and the final cell concentration are at their maximum, 0.88 g/l${\cdot}$day and 9.1 g/l, respectively. The results show that Chlorella sp. KR-1 may be used for mass cultivation to fix$CO_2$from stack gases.