• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.76-77
• /
• 2005

Single crystal $CuAlSe_2$ layers were grown on thoroughly etched semi-insulating GaAs(100) substrate at 410$^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $CuAlSe_2$ source at $680^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence(PL) and double crystal X-ray diffraction (DCXO). The temperature dependence of the energy band gap of the $CuAlSe_2$ obtained from the absorpt ion spectra was wel1 described by the Varshni's relation, $E_g$(T) = 2.8382 eV - ($8.86\times10^{-4}$ eV/H)$T_2$/(T + 155K). After the as-grown single crystal $CuAlSe_2$ thin films were annealed in Cu-, Se-, and Al-atmospheres, the origin of point defects of single crystal $CuAlSe_2$ thin films has been investigated by PL at 10 K. The native defects of $V_{cd}$, $V_{se}$, $Cd_{int}$, and $Se_{int}$ obtained by PL measurements were classified as donors or acceptors. And we concluded that the heat-treatment in the Cu-atmosphere converted single crystal $CuAlSe_2$ thin films to an optical n-type. Also. we confirmed that hi in $CuAlSe_2$/GaAs did not form the native defects because Al in single crystal $CuAlSe_2$ thin films existed in the form of stable bonds.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1437-1439
• /
• 1996

In this paper, investigations on a three stage processing technique involving the co-evaporation of In-Se, Cu-Se and In-Se in this order at different deposition condition was undertaken. At first stage, we obtained good $In_{2}Se_{3}$ films by In-Se coevaporation. $In_{2}Se_{3}$ films show smooth and dense structure. And ration of In:Se was 2:3 $CulnSe_2$ thin films deposited by three stage process have shown strong adhesion on Mo coated glass substrates and good morphological properties suitable device fabrication. XWD spectra show single phase chalcopyrite $CulnSe_2$ films with strong orientation in the 112 plane. Resistivity of $CulnSe_2$ thin films was about $5{\times}10^{5}\;{\Omega}{\cdot}cm$. Surface morphology of CdS/$CulnSe_2$/Mo films was very good because of no pin holes.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.48-48
• /
• 1992

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.344-348
• /
• 2004

The CdSe thin films wee grown on the Si(100) wafers by a hot wall epitaxy method(HWE). The source and substrate temperature are $600^{\circ}C\;and\;430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the timperature range 30K to 150K by impurity scatering and decreased in the temperature range 150K to 293K by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^7$, the MAPD of 335mV, and the rise and decay time of 10ms and 9.5ms, respectively

• 전기화학회지
• /
• 제10권4호
• /
• pp.262-264
• /
• 2007

This paper describes a two-step approach for the electrochemical deposition of CdZnS thin films on the polycrystalline Au electrode. Initially, an Au substrate is electrochemically modified with a sulfur layer. In the second step, the layer is electroreduced to $S^{2-}$ in the electrolyte dosed with the requisite amount of $Cd^{2+}$ and $Zn^{2+}$ ions to generate CdZnS films in situ. This approach was validated using a combination of linear sweep voltammetry and electrochemical quartz crystal microgravimetry. Thus synthesized CdZnS thin films have different composition depending on the composition of electrolytes. CdZnS thin films are characterized by energy-dispersive X-ray analysis and Raman spectroscopy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1058-1061
• /
• 2003

In this thesis, we observed the optical characteristic of amorphous chalcogenide thin films by He-Cd laser. Also, grating formation by He-Ne laser and He-Cd laser. After analyze diffraction efficiency of the time on the $Ag(200{\AA})/As_{40}Ge_{10}Se_{15}S_{35}$ thin films. The result diffraction efficiency of Maximun 0.2% reduced according to time grating formation by He-Ne laser. Diffraction efficiency of Maximun 0.1% showed stabiliy characteristic according to time grating formation by He-Cd laser.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.70-75
• /
• 1997

Electron beam 증착법을 보완하여 GaAs(100)기판위에 cubic(zinc blende) CdSe 에피충을 성장시켜 그의 특성을 조사하였다 .. CdSe 에피충의 격자 상수는 6.077 A였으며, 배향 성은 ECP 패번에 의하여 확인되고 결정성은 DCXR curve로 관찰하였다. 상온에서 측정된 H Hall data로는 에피충의 운반자 농도와 이통도는 각각 1018cm-3, 102cm2N' see 정도임을 알았 고 30 K에서 측정한 PC spectra peak는 cubic CdSe의 free exciton에 기인된 것으로 1.746 e eV에서 예리하게 나타냐고 있음을 보여주고 있다.

• 전기화학회지
• /
• 제10권4호
• /
• pp.257-261
• /
• 2007

The electronic properties of quantum dots can be tuned by changing the size of particles without any change in their chemical composition. CdSe quantum dots, the sizes of which were controlled by changing the concentrations of Cd and Se precursors, were adsorbed on $TiO_2$ photoelectrodes and used as sensitizers for photovoltaic cells. For applications of CdSe quantum dot as sensitizers, $CdSe/TiO_2$ films on conducting glass were employed in a sandwich-type cell that incorporated a platinum-coated conductive glass and an electrolyte consisting of an $I^-/I_3^-$ redox. The fill factor (FF) and efficiency for energy conversion ($\c{c}$) of the photovoltaic cell was 62 % and 0.32 %, respectively.

• 센서학회지
• /
• 제2권1호
• /
• pp.87-94
• /
• 1993

EBE법으로 슬라이드 유리기판 위에 CdS와 Se박막을 각각 증착하고 기판온도 및 열처리에 따른 표면상태, 결정구조, 전기적 및 광학적 특성을 분석하여 최적 제작조건을 찾았다. CdS는 기판온도 $150^{\circ}C$에서 입방정계로 가장 잘 성장되었으며 Se은 기판온도 $100^{\circ}C$까지 비정질을 나타내었으나 기판온도 $150^{\circ}C$일때는 단사정계로 결정성장되었다. 또한 비정질 Se을 온도 $150^{\circ}C$로 15분간 열처리하여 줌으로써 육방정계 결정 구조를 얻을 수 있었다. 최종적으로, 제작한 Se/CdS 이종접합에서 최대출력은 5000 lux일때 4 $mW/cm^{2}$이었으며 최대 분광감도는 585 nm에서 나타났다.