• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.55-62
• /
• 1992

The optical absorption characteristics of glasses colored by CdS. CdSe, $CdS_{1-x}Se_x$,ZnS, and ZnSe microcrystallites have been studied with emphasis on changes of the cut-off wavelength. The sharpcut filters with various cut-off wavelengths were fabricated by controlling the composition and the heat-treatment temperature. The cut-off wavelength shifts due to the different heat-treatment temperatures for CdS. CdSe, ZnS, and ZnSe doped SK-16 glasses were found to be relatively small(~30 nm). However, by treating the CdS1,Se, doped SK-16 glasses with different x values at the same heattreatment temperature, it was possible to obtain the filters with various cut-off wavelengths(~130 nm) without losing the high extinction coefficients of the filters. The filter glasses with various cut-off wavelngths(~100 nm) and high extinction coefficiencts were also produced by treating the CdSe and $CdS_{0.5}Se_{0.5}$ doped ZK-1 glasses at different temperatures.

• Journal of the Korean Chemical Society
• /
• v.59 no.2
• /
• pp.136-141
• /
• 2015

We have discovered that quercetin, once coated on the CdSe and CdSe-CdS quantum dots (QDs), becoming highly water soluble. In the present work, we have successfully synthesized CdSe/CdS/N-Acetyl-L-Cysteine(NAC)/Quercetin nano-composites in the aqueous solution. The products were characterized using UV-vis spectroscopy, X-ray powder diffraction, fluorescence spectroscopy, and Fourier transform infrared spectroscopy. The transmission electron microscopy (TEM) tests indicated that our nano-composite products are highly stable with homogeneous particle size and great monodispersity. Quercetin coated nano-composite CdSe/CdS/NAC/Quercetin showed different fluorescence behavior from that of CdSe/CdS/NAC. Most amazingly, the synthesized CdSe/CdS/NAC/Quercetin nano-composite exhibits strong antibacterial activity. The combination of the strong fluorescence and its antibacterial activity makes the quercetin modified quantum dots as a potential candidate for cancer targeted therapy and other cancer treatments.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.266-270
• /
• 2006

Poly [(dimethylmethylyinyl) siloxane] phosphineoxide (PMViSPO) was prepared by adding phosphorus oxychloride $(POCl_3)$ to poly (dimethylmethylyinyl) siloxane (PMViS) at $0^{\circ}C$ under nitrogen atmosphere. Cadmium selenide (CdSe) was prepared by reacting cadmium oxide (CdO), tetradecyl-phosphonic acid (TDPA), trioctylphosphine oxide (TOPO) at $300^{\circ}C$, and adding solution of dissolved Se to tributylphosphine (TBP) and trioctylphosphine (TOP) CdSe-poly [(dimethylmethylvinyl) siloxane] phosphine-oxide (CdSe-SPO) adduct was synthesised by adding PMViSPO to CdSe solution. Liquid silicone rubber composite (LSRC-1) was prepared by compounding $\alpha,\omega-vinyl$ poly (dimethylsiloxane) (VPMS), $\alpha,\omega-hydrogen$) poly(dimethylsiloxane) (HPMS), and CdSe under Pt catalyst, and also LSRC-2 was prepared from VPMS, HPMS, and CdSe-SPO using Pt catalyst. It was confirmed that CdSe nanoparticles with photoluminescence characteristics was dispersed uniformly in LSR matrix. The diameter of CdSe was $30\sim50nm$. By measuring the number of CdSe nanoparticles, 202 particles of CdSe in LSRC-2 and 165 particles of CdSe in LSRC-1 were dispersed in the same area of LSR matrix. Thermal stability for LSRC-2 compounded with CdSe-SPO was better than LSRC-1.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.50-54
• /
• 1986

Effects of additionof $NH_4Cl$, NaBr and LiF on the formation of Zircon and the synthesis of CdS-Se red stain were investigated by means of XRD, DTA and the color standard and color nomenclature. The red stain of CdS-Se system shows a little difference dependent on firing temperature on firing conditon. Consequently it forms a good soid-solution with red color under the ratio of CdS and Se 3.5 -4.1 at 58$0^{\circ}C$. But it changes to dark red as increasing Se. LiF is the most effective in mineralizer to preparae zircon with the equilbrant molar $SiO_2$ and ZrO Zircon makes a good preparation in 0.33 mole LiF from 90$0^{\circ}C$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.502-506
• /
• 2012

In order to find the structural characteristics of the thin films of group II-VI semiconductor compounds compared with those of powder materials, films were made of 4 powders of ZnS, CdS, CdSe, and CdTe(Aldrich), each with 99.99 % purity. For the ZnS/CdS multi-layers, the ZnS layer was coated over the CdS layer on an $AlO_x$ membrane, which served as a protective layer within a vacuum at the average speed of 1 ${\AA}$/sec. After studying the structures of the group II-VI semiconductor thin films by using X-ray spectroscopy, we found that the ZnS, ZnS/CdS, CdS, and CdSe films were hexagonal and exhibited some degree of preferred orientation. Also, the particles of the thin films of II-VI semiconductor compounds proved to be more homogeneous in size compared to those of the powder materials. These results were further verified through scanning electron microscopy(SEM), EDX analysis, and powder and thin film X-ray diffraction.

• Korean Journal of Crystallography
• /
• v.8 no.2
• /
• pp.105-110
• /
• 1997

1μm-CdS films for a window layer of CdS/CuInSe2 solar cell have been prepared by vacuum of 1x10-3 mTorr. Source and substrate temperature ranges were used 800-1100'C and 50-200℃ respectively. Structural, electircal and optical properties of CdS films have been investigated by X-ray diffractometer (XRD), scanning electron microscopy (SSEM), electrical resistivity, the Hall measurement and optical transmission spectra. Electrical resistivity and optical transmission of the CdS films decreased with the increase in CdS source temperature without substrate heating. All the films had hexagonal structure and strong texture with (002) orientation of grain normal to the substrate glass. CdS films evaporated at 1000℃ were the highest electrical conductivity of 0.9(S/cm). Electrical resistivity and optical transmission at the substrate temperature of 100℃ were 40(Ω,cm) and 80% respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.531-531
• /
• 2012

So many groups have been researching the green quantum dots such as InP, InP/ZnS for overcoming the semiconductor nanoparticles composed with heavy metals like as Cd and Pb so on. In spite of much effort to keep up CdSe quantum dots, it does not reach the good properties compared with CdSe/ZnS quantum dots. This quantum dot has improved its properties through the generation of core/shell CdSe/ZnS structure or core/multi-shell structures like as CdSe/CdS/ZnS and CdSe/CdS/ CdZnS/ZnS. In this research, we try to synthesize the InP multi-shell structure by the successiveion layer absorption reaction (SILAR) in the one pot. The synthesized multi-shell structure has improved quantum yield and photo-stability. To generate white light, highly luminescent InP multi-shell quantum dots were mixed with yellow phosphor and integrated on the blue LED chip. This InP multi-shell improved red region of the LEDs and generated high CRI.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.130-133
• /
• 2012

In this work we report investigation results of enhanced visible light photocatalytic properties of CdS and CdSe sensitized $TiO_2$ nanotube heterostructures. Anodically grown ordered $TiO_2$ nanotube arrays were sensitized with CdS and CdSe by using successive ionic layer adsorption and reaction method. Photocatalytic measurements revealed that heterostructured samples show enhanced photocurrent density under the visible light illumination. Improved visible light performance of the heterostuctures was explained by lower band gap of the CdS and CdSe and their favorable conduction band positions relative to $TiO_2$. Moreover, due to the lower band gap of the CdSe (1.7 eV) compared to CdS (2.4 eV), both photocurrent density and photoconversion efficiency results showed superior activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.470-470
• /
• 2011

반도체 집적회로의 고집적화 및 고성능화를 위한 기본 소자(MOSFET)의 미세화 및 단위공정의 물리적 한계를 극복하기 위한 다양한 연구가 진행되고 있다. 그 중 다양한 나노입자를 이용한 나노소자 제작 연구가 활발하게 이루어지고 있다. 하지만 이러한 나노입자를 이용한 나노소자의 제작에 있어서 원하는 위치의 나노입자의 배열과 정렬의 어려움을 겪고 있다. 이를 위해서 본 연구에서는 자기조립특성을 가지는 DNA 분자와 CdSe/ZnS 나노입자들의 표면 기능화를 통해서 상호 결합시키는 실험을 하였다. DNA 분자를 형틀로 이용하여 CdSe/ZnS 나노입자를 선택적 배열하고 전자 소자화하기 위해서는 CdSe/ZnS 나노입자의 표면 기능화가 필수적이다. 이를 위하여 무극성인 CdSe/ZnS 나노입자들과 DNA 분자의 phosphate backbone의 음전하와의 경합 특성을 향상시키기 위하여 이들 나노입자의 표면을 양전하로 치환하는 실험을 수행하였다. Core 나노입자인 CdSe 나노입자를 제작한 다음에 CdSe 보다 높은 band gap을 가지고 lattice mismatch가 적은 ZnS 로 shell 층을 형성하는 2-step 방법을 이용하여 합성한 CdSe/ZnS 나노입자를 무극성 용매인 chloroform 용액 0.5 ml에 분산시키고 DMAET 0.3 ml 와 Methanol 0.1 mg/ml를 이용하여 리간드들을 바꿔주고 과잉된 리간드인 DMAET를 제거하기 위해 Methanol로 3차례 세척한 다음 증류수에 용해시키는 실험을 하였다. 나노입자 기능화 과정 이후 기능화 여부를 판단하기 위하여 FT-IR spectroscopy 와 zeta potential 측정을 통하여 나노입자 표면의 변화와 전위를 측정하였다.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.23-26
• /
• 1986

The synthetic conditions of $ ZrSiO_4-Cd(S_xS_{1-x})$ stains from CdS, Se, $SiO_2$ , 4ZrO_2$ and Lif were investigated and the colors were examined. Colors of the stains prepared were yellow orange red pink ruby and violet in relation to both the content of CdS-Se in $ZrSiO_4$ and firing temperature. Colors of these series stains were thermally stabilized probably by the structural stability of zirconium silicate. Furthermore by the result of X-ray diffraction analysis it is assumed that color of the zircon cadmium sulphoselenide $ ZrSiO_4-Cd(S_xS_{1-x})$ stain is developed by neither the coloring ions in $ZrSiO_4$ lattice nor the solid solution of $ZrSiO_4$ and $Cd(S_xS_{1-x})$ but by the small crystals of $Cd(S_xS_{1-x})$ being occluded by the zirconium silicate during sintering process.