• 자원환경지질
• /
• 제38권5호
• /
• pp.563-570
• /
• 2005

본 연구의 목적은 일광폐동광산에서 유출되는 산성광산배수(AMD)내의 중금속에 대한 천연물질인 인회석 및 생선뼈의 현장에서의 제거효율을 평가하고 실내실험 견과와 비교하는 것이다. 현장실험 기간은 약 한 달이었으며 유속은 2.53-12.8 l/min 이었다. 현장실험 결과, 중금속 제거율의 경우 실내실험 결과와 유사하게 As, Fe 및 Pb는 인회석 및 생선뼈와 반응한 물 모두 높은 제거율을 보였으며 그 외 Al, Cd, Cu 및 Zn은 생선뼈와 반응한 물이 인회석과 반응한 물보다 높게 나타났다. 특히, 비소의 경우 실내실험 결과와 마찬가지로 비소의 경우 평균제거율이 $84\%$로 생선뼈의 평균제거율 $75\%$보다 높게 나타났다 인회석/생선뼈 및 AMD와 화학반응에 의해 형성된 인산염 침전물의 경우, 인회석 및 AMD와의 반응생성물은 가루형태이나, 생선뼈 및 AMD의 반응생성물은 슬러지 형태를 나타냈다. 기존 연구결과에 의하면 인회석은 광범위한 pH영역에서 광산배수의 침전제로 사용될 수 있고, 생선뼈는 pH가 낮은 고농도로 오염된 AMD에 사용하는 게 타당하다고 생각된다.

• Ecology and Resilient Infrastructure
• /
• 제3권2호
• /
• pp.100-109
• /
• 2016

도시 지역의 물순환 구축과 비점오염물질 저감을 위해 구축되는 LID 시설의 지속적 효율은 주요 내부 구성요소(식물, 토양, 여재, 미생물 등)의 최적화된 상호작용에 의하여 나타난다. 본 연구는 식생이 조성된 4가지 LID 기술 (식생체류지, 소규모 인공습지, 빗물정원 및 나무여과상자)의 실제 도시 강우유출수의 유입으로 인한 식물의 성장상태 변화와 물순환 효과 및 비점오염물질 저감능력을 평가하기 위하여 수행되었다. 도시지역의 강우유출수의 약 40% 이상의 유출저감을 위한 적정 SA/CA (facility surface area / catchment area) 비는 시설마다 차이는 있지만 1~5% 범위가 적당한 것으로 평가되었다. 강우시 LID 시설에서의 유출저감은 비점오염물질 저감효율 향상에 중요한 영향을 끼치는 기작으로 나타났으며, SA/CA는 LID 시설의 중요한 설계인자로 도출되었다. 유출저감에 효과적인 시설은 빗물정원 > 나무여과상자 > 식생체류지 > 소규모 인공습지 순으로 나타났으며 입자상 물질 (TSS)의 제거능력은 빗물정원 > 나무여과상자 > 소규모 인공습지 > 식생체류지 순으로 분석되었다. 유기물 (COD, TOC), 영양물질 (TN, TP) 및 중금속 (Cu, Pb, Cd, Zn) 제거에는 빗물정원 > 나무여과상자 > 식생체류지 > 소규모 인공습지 순으로 조사되었으며 이러한 결과들은 향후 도시지역의 물순환 구축 및 비점오염물 제거에 적용되는 LID 시설의 설계에 중요한 자료로 활용 가능할 것으로 판단된다.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.58-66
• /
• 2021

Spiral-wound woven wire meshes packed bed rotating cylinder electrode was used for the simultaneous removal of cadmium (Cd) and copper (Cu) from a binary solution. The effects of weight percent of each metal on the removal and current efficiencies were studied at an operating current of 345A, while the effect of current on the removal efficiency of both metals was investigated at three levels of current (240, 345.and 400 mA). The experiments were carried out at constant rotation speed 800 rpm, pH = 3, and a total concentration of metals (500 ppm). The results showed that the removal efficiency of copper increased from 89% to 99.4% as its weight percent increased from 20% to100%. In a similar fashion, the removal efficiency of cadmium increased from 81% to 97% as its weight percent increased from 20% to100%. The results confirmed that the removal efficiency of any metals declined in the presence of the other. Increasing of current resulted in increasing the removal efficiency of both metals at different weight percents. The results confirmed that current efficiencies for removing of copper and cadmium simultaneously decline with increasing of electrolysis time and weight percent of cadmium or with decreasing the weight percent of copper. Current efficiency was higher at the initial stage of electrolysis for all weight percents of metals. The results showed that the decay of copper concentration was exponential at all weight percents of copper, confirming that the electrodeposition of copper is under mass transfer control in the presence of cadmium. While the decay of cadmium concentration was linear at lower weight percent of cadmium then changed to an exponential behavior at high weight percent of cadmium in the presence of copper.

• Environmental Engineering Research
• /
• 제10권5호
• /
• pp.205-212
• /
• 2005

The study was conducted to investigate the removal of heavy metals by using Hydroxyapatite(HAp) made from waste oyster shells and wastewater with high concentration of phosphorus. The maximum calcium concentration for the production of HAp in this study was released up to 361 mg/L at pH of 3 by elution experiments. When the pH was at adjusted 6, the maximum calcium released concentration was 41 mg/L. During the elution experiment, most of the calcium was released within 60 minutes. This reaction occurred at both pH levels of 3 and 6. The result of the XRD analysis for the HAp product used in this study shows the main constituent was HAp, as well as OCP. The pH was 8.6. As the temperature increased, the main constituent did not vary, however its structure was crystallized. When the pH was maintained at 3, the removal efficiency decreased as the heavy metal concentration increased. The order of removal efficiency was as follows: $Fe^{2+}$(92%), $Pb^{2+}$(92%) > $Cu^{2+}$(20%) > $Cd^{2+}$(0%). Most of these products were dissolved and did not produce sludge in the course of heavy metals removal. As the heavy metal concentration increased at pH of 6, the removal efficiency increased. The removal efficiencies in all heavy metals were over 80%. From the analysis of the sludge after reaction with heavy metals, the HAp was detected and the OCP peak was not observed. Moreover, lead ion was observed at the peaks of lead-Apatite and lead oxidant. In the case of cadmium, copper and iron ions, hydroxide forms of each ion were also detected.

• KSBB Journal
• /
• 제8권4호
• /
• pp.336-340
• /
• 1993

생물고분자 생산을 위하여 오니에서 slime을 생산하는 Zoogloea ramigera 115를 선택하였다. 추출한 생물고분자는 카드뮴, 아연 같은 금속에 대해서 높은 흡착성능을 나타냈다. 특히 발효조 broth는 높은 흡착성능을 나타냄으로써 부가적인 분리공정없이 생물흡착제로서 사용 가능할 것이다. 생물고분자는 calcium alginate bead 형태로 고정화되어 유가금속 회수를 위하여 충전층 반응기에 사용되었다. 생물흡착제는 구리, 카드뮴, 망간, 아연에 대하여 80% 또는 그이상의 높은 제거율을 나타냈으며 흡착-탈착-재흡착 실험에서 높은 안정성을 나타냈다. 고정화된 생물고분자 시스템은 이온교환수지와 같은 다른 중금속 제거 시스템과 경쟁력 및 잠재적인 산업상 응용 가능성을 보였다.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• Environmental Analysis Health and Toxicology
• /
• 제16권1호
• /
• pp.35-41
• /
• 2001

Barley or corn tea, which is usually prepared with municipal chlorinated tap water, is commonly consumed by the public as a substitute for the supplied water itself. This is because most people believe that harmful organic and inorganic compounds can be removed from the tap water by the adsorption mechanism during the tea preparation. In this study, three kinds of commercial grain tea materials-roasted barley grains, a tea bag containing barley grain pieces, and roasted corn grains-were tested for metal removal by preparing 1 liter of tea with deionized/distilled water according the manufacturer's recommended preparation procedures, assuming that the water is contaminated with eight selected metals at levels of 50$\mu\textrm{g}$/l. Of the tested teas, barley tea prepared with roasted grains showed the highest removal efficiency for Cu, As, Ni, Co, Pb, and Cd, ranging from 48 to 71%, followed by corn tea with roasted grains and barley tea with a tea bag. Cr was nearly maintained at the initial concentration in all kinds of tea. The Mn levels. however, were elevated during the tea preparation, particularly in both barley teas, probably because the metal was extracted into the water from the tea materials without significant adsorption. Therefore, it should be considered in the ingestion exposure analysis for metals that their concentrations are altered during the tea preparation with roasted barley or corn grain materials.

• Environmental Engineering Research
• /
• 제20권1호
• /
• pp.89-97
• /
• 2015

Remediation of wastewater contaminated with metal(II)-complexed species (Cu(II)-NTA (NTA: nitrilotriacetic acid), Cu(II)-EDTA (EDTA: ethylenediamine tetraacetic acid) and Cd(II)-EDTA is attempted using the potential applicability of ferrate(VI). Kinetics of pollutant degradation is obtained with the removal of ferrate(VI) studied at wide range of pH (8.0-10.0) and the concentration of metal(II)-complexed species (0.3 to 15.0 mmol/L) employing a constant dose of ferrate(VI) i.e., 1.0 mmol/L. Pseudo-first-order and pseudo-second-order rate constants were obtained in the reduction of ferrate(VI) which was then employed to obtain the overall rate constants of the pollutant degradation. The mineralization of NTA and EDTA was obtained with the change in TOC (total organic carbon) values collected by the ferrate(VI) treated pollutant samples. Decrease in pH and molar pollutant concentrations was greatly favored the percent mineralization of NTA or EDTA by the ferrate(VI) treatment. The treated pollutant samples were filtered and subjected for AAS (atomic absorption spectrophotometric) analysis to assess the simultaneous removal of copper and cadmium from aqueous solutions at the studied pH as well at the elevated pH 12.0. Results show that an enhanced removal of cadmium or copper was achieved at pH 12.0. Overall, ferrate(VI) possesses multifunctional application in wastewater treatment as it oxidizes the degradable impurities and removes metallic impurities by coagulation process.

• 한국환경과학회지
• /
• 제21권6호
• /
• pp.667-676
• /
• 2012

This research investigated to reduce mass of heavy metals in AMD(acid mine drainage) by microbial mats formed on the channel bed. As, Cd, Cu, Fe, Mn and Zn components were monitored in water and microbial mats, at three points (AMD1, AMD2 and AMD3), in a total of six times. Average daily discharge mass of heavy metals was highest in July, Fe component contained more than 76% of total discharge mass. Discharge mass of heavy metals of AMD and heavy metal contents in microbial mats decreased with downstream at channel. Heavy metal components that average daily discharge mass is over 0.5 kg were Fe, Cu and Zn, and they were highest in July. Average removal efficiency of heavy metals in AMD was highest about 21% in Fe, this microbial mats were due to form from precipitation of Fe component in AMD by aerobic iron bacteria. Relative content for As component in microbial mats than AMD was over 16 times, this As components were due to absorb at iron oxide and iron hydroxide on the surface of microbial mats.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.109-122
• /
• 2018

This study was conducted to investigate the removal characteristics of heavy metals and sulfate ion from acid mine drainage by porous zeolite-slag ceramics (ZS ceramics) that was prepared by adding wood flour as pore-foaming agent while calcining the mixtures of natural zeolite and converter slag. The batch test showed that the removal efficiency of heavy metals by pellet-type porous ZS ceramics increased as the particle size of wood flour was decreased and as the weight mixing ratio of wood flour to ZS ceramics was increased. The optimal particle size and weight mixing ratio of wood flour were measured to be $75{\mu}m$ and 7~10%, respectively. The removal test with the porous ZS ceramics prepared in these optimal condition showed very high removal efficiencies: more than 98.4% for all heavy metals and 73.9% for sulfate ion. Relative to nonporous ZS ceramics, the increment of removal efficiency of heavy metals by porous ZS ceramics with $75{\mu}m$ and 10% wood flour was 5.8%, 60.5%, 36.9%, 87.7%, 10.3%, and 57.4% for Al, Cd, Cu, Mn, Pb, and Zn, respectively. The mechanism analysis of removal by the porous ZS ceramics suggested that the heavy metals and sulfate ion from acid mine drainage are eliminated by multiple reactions such as adsorption and/or ion exchange as well as precipitation and/or co-precipitation.