• Journal of the Korean Geotechnical Society
• /
• v.37 no.12
• /
• pp.117-125
• /
• 2021

The occurrence of ground subsidence and sinkhole in downtown areas, which threatens the safety of citizens, has been frequently reported. Among the various mechanisms of a sinkhole, soil erosion through the damaged part of the sewer pipe was found to be the main cause in Seoul. In this study, a random forest model for predicting the occurrence of sinkholes caused by damaged sewer pipes based on sewage pipe information was trained using the information on the sewage pipe and the locations of the sinkhole occurrence case in Seoul. The random forest model showed excellent performance in the prediction of sinkhole occurrence after the optimization of its hyperparameters. In addition, it was confirmed that the sewage pipe length, elevation above sea level, slope, depth of landfill, and the risk of ground subsidence were affected in the order of sewage pipe information used as input variables. The results of this study are expected to be used as basic data for the preparation of a sinkhole susceptibility map and the establishment of an underground cavity exploration plan and a sewage pipe maintenance plan.

• Korean Journal of Microbiology
• /
• v.55 no.1
• /
• pp.58-60
• /
• 2019

Anaerobic Gram-negative bacterium Prevotella intermedia is a part of normal flora of the oral cavity and associated with various types of oral and systemic diseases. We present here a draft genome sequence of P. intermedia ATCC 15032, originally isolated from cervicofacial actinomycosis. The genome is 2,848,426 bp in length and has a GC content of 43.45%. The genome includes 2,358 protein-coding genes, 5 rRNAs, and 43 tRNA. The sequence information will provide important clues in understanding the genome diversity within the bacterial species, and genetic basis for phenotypic differences among P. intermedia strains.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.280-287
• /
• 2019

In the oral cavity, the teeth undergo wear and corrosion throughout their lives. Progressive and constant tooth wear is a natural phenomenon of aging, but wear and corrosion due to specific factors are pathological factors. It can cause pathological damage of the occlusal surface, aesthetic problems, dimensional loss and jaw joint disorders. This case is a 26-year-old female patient with general tooth abrasion and erosion on the entire dentition. Diagnostic wax-up was fabricated based on the information including digital facial analysis, physiological stabilization, and evaluation of anterior crown length. Through the digital analysis, the necessary guides for crown lengthening were prepared and the mastication function and esthetics were evaluated by using temporary crowns. Definitive prosthesis was fabricated with the zirconia restorations. The results were satisfactory when they were observed 3 months of follow-up.

• Clinics in Shoulder and Elbow
• /
• v.27 no.1
• /
• pp.88-107
• /
• 2024

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.

• Clinical Endoscopy
• /
• v.56 no.3
• /
• pp.283-289
• /
• 2023

Gastrointestinal (GI) bleeding is one of the most common conditions among patients visiting emergency departments in Korea. GI bleeding is divided into upper and lower GI bleeding, according to the bleeding site. GI bleeding is also divided into overt and occult GI bleeding based on bleeding characteristics. In addition, obscure GI bleeding refers to recurrent or persistent GI bleeding from a source that cannot be identified after esophagogastroduodenoscopy or colonoscopy. The small intestine is the largest part of the alimentary tract. It extends from the pylorus to the cecum. The small intestine is difficult to access owing to its long length. Moreover, it is not fixed to the abdominal cavity. When hemorrhage occurs in the small intestine, the source cannot be found in many cases because of the characteristics of the small intestine. In practice, small-intestinal bleeding accounts for most of the obscure GI bleeding. Therefore, in this review, we introduce and describe systemic approaches and examination methods, including video capsule endoscopy and balloon enteroscopy, that can be performed in patients with suspected small bowel bleeding in clinical practice.

• Korean Journal of Ichthyology
• /
• v.36 no.1
• /
• pp.101-106
• /
• 2024

In May 2020, a single larval specimen (5.14 mm in total length) was collected from the southeastern sea of Jeju Island of Korea using bongo net. The specimen was identified as Lepidotrigla longifaciata based on mitochondrial DNA cytochrome c oxidase subunit I sequences. The morphological traits of the L. longifaciata larva are as follows: a long snout, a large mouth, large fan-shaped pectoral fins, and black melanophores scattered on the abdominal cavity and nape. We propose the new Korean name 'Gin-meo-ri-dal-jae' for this species, which was first discovered in Korea.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.13-18
• /
• 1995

Craniofacial asymmetry was analyzed in 39 patients with complete unilateral cleft lip and palate(UCLP). The samples are devided into three groups nine below 9 years, twenty three from 9 years 1 month to 14 years and seven over 14 years group. Seventeen measurements were obtained from the tracing of PA X-ray cephalometric headfilms to evaluate the asymmetric characteristics and changes accdording to aging in UCLP. The obtained results were as follows. 1. Facial asymmetry in UCLP is variable(1.22-3.47 $mm/^{\circ}$) and the length from midsagitta1 reference line to maxillary 1st molar, to upper central incisor and the length of mandibular ramus showed significant asymmetry 2. Nasal septum and anterior nasal spine were deviated In the cleft side and the lower border of nasal cavity was 1ower in cleft side. 3. The deviation of nasal septum was continued significantly till after 14 years old.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.413-431
• /
• 1992

Gonadal development, fertilization and egg development in the maternal body and reproductive cycle of ovoviviparous rockfish, Sebastes inermis, were investigated histologically. Gonadosomatic index(GSI) of male and female were increased from September and reached maximum values in December. In the male, GSI decreased from January, but in the female maintained high values till February and decreased from March. Hepatosomatic index(HSI) was related to GSI conversely. In both sex, HSI increased from February and reached maximum in August as the gonad were degenerating and resting, and began to decrease from September as gonad were glowing. This ovoviviparous rockfish copulates in December. Fertilization with sperms maintained between ovulated oocytes in the ovary occurs in January mainly. Egg development in the ovarian cavity and discharging of hatched preiarva occurs from January to February. The reproductive cycle includes the successive stages: Growing(September), Mature (October-November), Ripe and Fertilization(Decembr-Janua), Egg development and Discharging of hatched larva(January-February), Degeneration and Resting(February-August). According to the frequency distribution of egg diameter and histological observation, the ovoviviparous rockfish discharged the prelarva at a time in a spawning season. The sexual maturation is first attained at 2 ages. All females and males reaches first maturity at body length of 17.1cm and 15.1cm respectively. The mean number of the embryos increased with the increase of the total length of female.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.55-64
• /
• 2006

It is very Important to predict the damage zone of a rock mass induced by blasting for the excavation of an underground cavity such as a tunnel, as the damage zones incur mechanical and hydraulic instability of the rock mass potentially. Complicated blasting processes that can hinder the proper characterization of the damage zone can be effectively represented by two loading mechanisms. The first mechanism is the dynamic impulsive load-generating stress waves that radiate outwards immediately after detonation. This load creates a crushed annulus along with cracks around the blasthole. The second is the gas pressure that remains for an extended time after detonation. As the gas pressure reopens some arrested cracks and extends these, it contributes to the final structure of the damage zone induced by the blasting. This paper presents a simple method to evaluate the damage zone induced by gas pressure during rock blasting. The damage zone is characterized by analyzing crack propagations from the blasthole. To do this, a model of a blasthole with a number of radial cracks that are equal in length in a homogeneous infinite elastic plane is considered. In this model, crack propagation is simulated through the use of only two conditions: a crack propagation criterion and the mass conservation of the gas. The results show that the stress intensity factor of a crack decreases as the crack propagates from the blasthole, which determines the crack length. In addition, it was found that the blasthole pressure continues to decrease during crack propagation.