• 터널과지하공간
• /
• 제24권6호
• /
• pp.449-463
• /
• 2014

국내의 경우 슬러리나 페이스트 형태로 수압식 충전에 대한 연구와 다양한 폐광산 현장에 적용한 사례는 많으나, 공압식 충전에 대한 연구는 진행되지 않고 있다. 기존의 공압식 충전법은 강관의 구부러진 곳에서 충전재 유동에 의한 마모에 의해 강관의 손상이 발생한다. 이와 같은 문제점을 개선하기 위하여 새로 고안한 개량형 노즐을 이용한 공압식 충전법을 개발하였다. 본 연구에서는 접근이 가능하거나 불가능한 채굴공동을 모사하여 실험실에서 모형실험을 수행하고 그 충전효율을 평가하였다. 갱내 충전법 실험에서는 토출각의 변화, 모래의 투입량 및 입자 크기에 따라 충전효율을 분석하였으며, 지상 충전법 실험에서는 중력식, 재래식 및 개량형 충전방법의 실험으로부터 충전효율을 분석하여 개량형 공압식 충전법의 우수성을 입증하였다.

• 한국터널지하공간학회 논문집
• /
• 제24권3호
• /
• pp.263-278
• /
• 2022

본 논문에서는 가소성 특성을 지니는 TBM 뒤채움재의 개발과 성능을 연구하기 위하여 실험한 내용을 다루고 있다. 쉴드 TBM 굴진 시 배면을 충전하는 방법으로 현재 LW 뒤채움재를 사용해오고 있는데, LW 뒤채움재는 강도 저하로 인한 침하발생, 지하수에 의한 재료분리, 가소성 저하와 같은 단점을 가지고 있다. 이러한 문제점을 개선하기 위하여 개발한 무기질계 가소성 뒤채움재의 성능을 분석하기 위해 실내시험과 모형실험을 수행하였다. 실내시험 결과, 무기질계 가소성 뒤채움재는 LW 뒤채움재 대비 재령 1시간의 일축압축강도가 12배 이상 높게 나타났고 블리딩률은 8.3배 이상 낮게 측정되었으며 플로우 값은 27배 이상 높게 나타났다. 이러한 결과로 미루어볼 때 무기질계 가소성 뒤채움재가 강도 저하, 재료분리, 주입성면에서 LW보다 성능이 우수한 것으로 판단된다. 또한 충전 성능을 분석하기 위해 모형 주입장치 시험기를 제작하였고, 수중에서 재료분리 발생여부를 육안으로 확인하였으며, LW 뒤채움재보다 ITB의 충전율이 20% 이상 높게 나타났다. 이는 무기질계 가소성 뒤채움재가 지하수에 의한 재료분리를 방지하며, 터널의 공동 발생을 억제시킬 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1285-1292
• /
• 2009

Large single crystals of zeolite, |$Na_{75}$|[$Si_{117}Al_{75}O_{384}$]-FAU (Na-Y, Si/Al = 1.56), were synthesized from gels with composition of 3.58Si$O_2$ : 2.08NaAl$O_2$ : 7.59NaOH : 455$H_2$O : 5.06TEA : 2.23TCl. One of these, a colorless single-crystal was ion exchanged by allowing aqueous 0.02 M CsOH to flow past the crystal at 293 K for 3 days, followed by dehydration at 673 K and 1 ${\times}\;10^{-6}$ Torr for 2 days. The crystal structure of fully dehydrated partially $Cs^+$-exchanged zeolite Y, |$Cs_{45}Na_{30}$|[$Si_{117}Al_{75}O_{384}$]-FAU per unit cell (a = 24.9080(10) $\AA$) was determined by single-crystal X-ray diffraction technique in the cubic space group Fd $\overline{3}$ m at 294(1) K. The structure was refined using all intensities to the final error indices (using only the 877 reflections with $F_o\;>\;4{\sigma}(F_o))\;R_1$ = 0.0966 (Based on F) and $R_2\;=\;0.2641\;(Based\;on\;F^2$). About forty-five $Cs^+$ ions per unit cell are found at six different crystallographic sites. The 2 $Cs^+$ ions occupied at site I, at the centers of double 6-ring (D6Rs, Cs-O = 2.774(10) $\AA$ and O-Cs-O = 88.9(3) and 91.1(3)$^o$). Two $Cs^+$ ions are found at site I’ in the sodalite cavity; the $Cs^+$ ions were recessed 2.05 $\AA$ into the sodalite cavity from their 3-oxygen plane (Cs-O = 3.05(3) $\AA$ and O-Cs-O = 77.4(13)$^o$). Site-II’ positions (opposite single 6-rings in the sodalite cage) are occupied by 7 $Cs^+$ ions, each of which extends 2.04 $\AA$ into the sodalite cage from its 3-oxygen plane (Cs-O = 3.067(11) $\AA$ and O-Cs-O = 80.1(3)$^o$). The 26 $Cs^+$ ions are nearly three-quarters filled at site II in the supercage, being recessed 2.34 $\AA$ into the supercage (Cs-O = 3.273(8) $\AA$ and O-Cs-O = 74.3(3)$^o$). The 4 $Cs^+$ ions are found at site III deep in the supercage (Cs-O = 3.321(19) and 3.08(3) $\AA$), and 4 $Cs^+$ ions at another site III’ (Cs-O = 2.87(4) and 3.38(4) $\AA$). About 30 $Na^+$ ions per unit cell are found at one crystallographic site; The $Na^+$ ions are located at site I’ in the sodalite cavity opposite double 6-rings (Na-O = 2.578(11) $\AA$ and O-Na-O = 97.8(4)$^o$).

• 대한화학회지
• /
• 제33권1호
• /
• pp.18-24
• /
• 1989

X-선 단결정법으로 탈수한 $Ag_{9}Rb_{3}-A$ (a = 12.278(2)${\AA}$) 와 $Ag_{10}Rb_{2}-A$ (a = 12.286(2)${\AA}$)의 구조를 입방공간군 Pm3m을 써서 해석하였다. $Ag_{9}Rb_{3}-A$의 구조는 I >3${\sigma}$(I)인 회절반점 291개를 이용하여 $R_1$ = 0.064, $R_2$ = 0.060까지 정밀화 시켰으며 $Ag_{10}Rb_{2}-A$의 구조는 416개의 회절반점을 이용하여 $R_1$ = 0.063, $R_2$ = 0.080까지 정밀화 시켰다. 두 구조 모두 단위세포당 하나의 환원된 은 원자가 소다라이트 동공 내에 있으며 이 환원된 은 원자는 소다라이트 동공 1/6개 마다 $Ag_6$로 존재하든가 혹은 모든 소다라이트 동공마다 4mm 대칭성을 가지는 $(Ag_5)^{4+}$ 클러스터로 존재한다. 그 밖에 탈수한 $Ag_{9}Rb_{3}-A$에서는 8개의 $Ag^+$이온은 6-링 중심 3회 회전축 상에 있으며 3개의 $Rb^+$이온은 8-링 중심 $D_{4h}$ 대칭성을 가지고서 위치하고 있다. 또 탈수한 $Ag_{10}Rb_{2}-A$구조에서는 2개의 다른 6-링 $Ag^+$ 이온 즉 7개의 $Ag^+$ 이온은 6-링 평면상에 위치하고 1개의 $Ag^+$이온은 소다라이트 동공 내에 위치한다. 두 개의 서로 다른 8-링 양이온이 있으며 두 개의 $Rb^+$이온은 8-링 중심에 위치하였고 1개의 $Ag^+$이온은 8-링에서 0.1$\AA$ 만큼 큰 동공 쪽으로 이동하여 위치한다. 두 구조에서 보면 $Ag^+$이온은 6-링 위치에 $Rb^+$ 이온은 8-링 위치에 우선적으로 위치한다.

• Journal of Trauma and Injury
• /
• 제18권2호
• /
• pp.172-174
• /
• 2005

Trauma of the vascular structure is not poplular event. In obstructive atherosclerotic vascular disease, we sometimes have needed bypass surgery. The long length subcutaneous prosthetic vascular graft are vulnerable to injury. But prosthetic vessel rupture after trauma has been rare report. A 68-year-old man was referred to Department of Emergency of the Gyeongsang National University Hospital. After he had had a blunt trauma, he found a newly appearing pulsating mass of 10 cm diameter on his right chest wall. The lesion had a turbulent blood flow in the cavity of the mass by ultrasonographic finding. The lesion was a rupture of superficial prosthetic vascular graft under the skin.

• Wind and Structures
• /
• 제16권1호
• /
• pp.1-23
• /
• 2013

The wind-induced transient response of internal pressure following the creation of a sudden dominant opening during the occurrence of high external pressure, in low-rise residential and industrial buildings was numerically investigated. The values of the ill-defined parameters namely the flow contraction coefficient, loss coefficient and the effective slug length were calibrated by matching the analytical response with the computational fluid dynamics predictions. The effect of a sudden i.e., "instantaneously created" windward opening in the Texas Technical University (TTU) test building envelope was studied for two different envelope flexibility-leakage combinations namely: (1) a quasi-statically flexible and non-porous envelope and (2) a quasi-statically flexible and porous envelope. The responses forced by creating the openings at different time leads/lags with respect to the occurrence of the peak external pressure showed that for cases where the openings are created in close temporal proximity to the peak pressure, the transient overshoot values of internal pressure could be higher than the peak values of internal pressure in the pre-sequent or subsequent resonant response. In addition, the influence of time taken for opening creation on the level of overshoot was also investigated for the TTU building for the two different envelope characteristics. Non-dimensional overshoot factors are presented for a variety of cavity volume-opening area combinations for (1) buildings with rigid/quasi-statically flexible non-porous envelope, and (2) buildings with rigid/quasi-statically flexible and porous envelope (representing most low rise residential and industrial buildings). While the factors appear slightly on the high side due to conservative assumptions made in the analysis, a careful consideration regarding the implication of the timing and magnitude of such overshoots during strong gusts, in relation to the steady state internal pressure response in cyclonic regions, is warranted.

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.893-899
• /
• 2015

사출 금형 설계에서 금형 온도 분포와 변형은 사출품의 플래시나 표면 단차에 주요한 영향 인자이다. 금형 온도 분포와 성형면의 압력분포를 예측하기 위하여 먼저 금형을 포함한 사출해석을 수행하였다. 계산된 온도분포와 압력분포는 금형 구조해석의 입력조건으로 사용하였다. 해석의 정확성을 위하여 금형 전체 세트에 대한 구조해석 조건을 도출하였다. 도출된 해석 모델로 성형면의 단차 및 벌어짐 크기에 대하여 금형 열팽창, 성형 중 온도변화의 영향을 분석하였다. 해석 결과를 바탕으로 성형면의 단차 감소 방안을 도출하였다.

• Korea-Australia Rheology Journal
• /
• 제19권4호
• /
• pp.183-190
• /
• 2007

Injection molding is one of the most common operations in polymer processing. Good quality products are usually obtained and major post-processing treatment is not required. However, residual stresses which exist in plastic parts affect the final shape and mechanical properties after ejection. Residual stresses are caused by polymer melt flow, pressure distribution, non-uniform temperature field, and density distribution. Residual stresses are predicted in this study by numerical methods using commercially available softwares, $Hypermesh^{TM},\;Moldflow^{TM}\;and\;ABAQUS^{TM}$. Cavity filling, packing, and cooling stages are simulated to predict residual stress field right after ejection by assuming an isotropic elastic solid. Thermo-viscoelastic stress analysis is carried out to predict deformation and residual stress distribution after annealing of the part. Residual stresses are measured by the hole drilling method because the automotive part selected in this study has a complex shape. Residual stress distribution predicted by the thermal stress analysis is compared with the measurement results obtained by the hole drilling method. The molded specimen has residual stress distribution in tension, compression, and tension from the surface to the center of the part. Viscoelastic deformation of the part is predicted during annealing and the deformed geometry is compared with that measured by a three dimensional scanner. The viscoelastic stress analysis with a thermal cycle will enable us to predict long term behavior of the injection molded polymeric parts.

• Parasites, Hosts and Diseases
• /
• 제40권3호
• /
• pp.119-129
• /
• 2002

Although there are many reports on the splenic (systemic) T cell response after Toxoptasma gondii infection, little information is available regarding the local T cell responses of peritoneal exudate cells (PEC) and gut intraepithelial Iymphocytes (IEL) following peroral infection with bradyzoites. Mice were infected with 40 cysts of the 76K strain of T. gondii, and then sacrificed at days 0, 1, 4, 7 and 10 postinfection (PI). The cellular composition and T cell responses of PEC and IEL were analyzed. The total number of PEC and IEL per mouse increased after infection, but the ratio of increase was higher in IEL. Lymphocytes were the major component of both PEC and IEL. The relative percentages of PEC macrophages and neutrophils/eosinophils increased signiflcantly at day 1 and 4 PI, whereas those of IEL did not change significantly. The percentage of PEC NK1.1 and ${\gamma\delta}T$ cells peaked at day 4 PI (p < 0.0001), and CD4 and $CD8{\alpha}T$ cells increased continuously after infection. The percentages of IEL $CD8{\alpha}$ and ${\gamma\delta}T$ cells decreased slightly at first, and then increased. CD4 and NK1.1 T cells of IEL did not change significantly after infection. $IFN-{\gamma}-producing$ PEC NK1.1 T cells increased significantly from day 1 PI, but the other T cell subsets produced $IFN-{\gamma}$ abundantly thereafter. The proportion of IEL $IFN-{\gamma}-producing$ $CD8{\alpha}$ and ${\gamma\delta}T$ cells increased significantly after infection, while IEL NK1.1 T cells had similar $IFN-{\gamma}$ production patterns. Taken together, CD4 T cells were the major phenotype and the important $IFN-{\gamma}$ producing T cell subsets in PEC after oral infection with T. gondii whereas $CD8{\alpha}T$ cells had these roles in IEL. These results suggest that PEC and IEL comprise different cell differentials and T cell responses, and according to infection route these factors may contribute to the different cellular immune responses.

• 대한치과의사협회지
• /
• 제49권4호
• /
• pp.219-226
• /
• 2011

Snoring and obstructive sleep apnea (OSA) are common sleep disordered breathing conditions. Habitual snoring is caused by a vibration of soft tissue of upper airway while breath in sleeping, and obstructive sleep apnea is caused by the repeated obstructions of airflow for a sleeping, specially airflow of pharynx. Researchers have shown that snoring is the most important symptom connected with the obstructive sleep apnea syndrome The treatment is directed toward improving the air flow by various surgical and nonsurgical methods. The current surgical procedures used are uvulopalatopharyngoplasty(UPPP), orthognathic surgery, nasal cavity surgery. Among the nonsurgical methods there are nasal continuous positive air pressure(CPAP), pharmacologic therapy. weight loss in obese patient, oral appliance(sleep splint). Sleep splint brings the mandible forward in order to increase upper airway volume and prevents total upper airway collapse during sleep. However, the precise mechanism of action is not yet completely understood, especially aerodynamic factor. The aim of this study evaluated the effect of conservative treatment of snoring and OSAS by sleep splint through measured aerodynamic change by an aerophone II. We measured a airflow, sound pressure level, duration, mean power from overall airflow by aerophone II mask. The results indicated that on a positive correlation between a decrease in maximum airflow rate and a decrease in maximum sound pressure level, on a negative correlation between a decrease in maximum airflow rate and a increase in duration.