• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.367-369
• /
• 2001

The lateral rhinotomy signifies only an incision and not on operation and a lateral rhinotomy incision with osteotomy of the nasal bones provides access to the entire nasal cavity and maxillary, ethmoid, and sphenoid sinuses as well as the frontal sinus if the floor is removed, permitting removal of benign lesions at these sites and en bloc resection of the ethmoid labyrinth and the party wall between the nasal cavity and antrum with infiltrating tumors. The authors treated a tumor patient and a midfacial bone fracture patient via lateral rhinotomy approach and had a good result. So we report the cases with literature review.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.235-239
• /
• 2004

Sound transmission either as airborne or structure borne is a potential problem that occurs in buildings either from sources within or from outside. With the expansion of real estate activities in countries like India, the need to attend sound insulation requirements also assumes greater dimensions. The focus of this research is on studying the sound transmission characteristics of building structures made of hollow blocks, neocrete block, aerocon block and prefabricated panels such as Ferrocement panel. The tests were carried out the blocks with and without plastering and their sound reduction index was measured at one-third octave frequencies. In the case of ferrocement panels, different types of systems were tested in the TL suite. Panels with cavity, with cavity ties, with insulation, with stiffeners and with plasterboard were investigated. Sound reduction index of these panels was measured with additional quantities like longitudinal wavespeed, and loss factors (internal and total loss factor). Tests were also conducted on Cypcrete wall panel and Sandwiched wooden panel in a similar way. Theoretical investigations were carried out using Statistical Energy Analysis (SEA) for the above systems. Sound reduction index was then compared between the predicted and the measured values.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2120-2125
• /
• 2015

In this paper, a rectangular waveguide probe with a ridge-loaded straight slot (RLSS) is presented for a near-field scanning microwave microscope (NSMM). The RLSS is located laterally at the end wall of the cavity and is loaded on double ridges in a narrow straight slot to improve the spatial resolution compared with a straight slot. The probe consists of a rectangular cavity with an RLSS and a feed section of a WR-90 rectangular waveguide. When the proposed NSMM is located at distance of 0.1mm in front of a substrate without patches or strips, the simulated full width at half maximum (FWHM) of the probe improve by approximately 31.5 % compared with that of a straight slot without ridges. One dimensional scanning of the E-plane on a sample under test was conducted, and the reflection coefficient of the near-field scanning probe is presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.327-330
• /
• 2006

Numerical study on the passive control of the oblique shock wave/turbulent boundary-layer interaction control utilizing slotted plates over a cavity has been carried out. Numerical results have been compared with the experimental observations, such as pitot/wall surface pressures and Schlieren flow visualizations, obtained for the same boundary conditions. It was found that the present numerical results shows a good agreement with experimental data. Further, the effect of different slot configurations including various number, location and angle of slots on the characteristics of the interactions are also tested, focusing on the variation of the piot pressure and the boundary-layer characteristics downstream of the interaction and the recirculating mass flux through cavity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.950-954
• /
• 2003

This paper presents the delivered power and reflection coefficient in metallic shielding enclosure excited by the interior source, which are evaluated with the method of moments, and describes a method for reducing the radiation of electromagnetic fields in the cavity by putting lossy dielectric material in one inside wall. In this paper we introduce carbon polystyrene-foam as lossy dielectric material and observe it's effects of reduction when the thickness and permittivity of lossy dielectric material are changed. The results show that the reduction of the electromagnetic radiation can be achieved by controlling the amount of carbon in lossy dielectric material. The theoretical analysis is verified by the measured delivered power.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.19 no.1
• /
• pp.137-147
• /
• 1989

CT findings of proven 25 malignant tumors of the maxillary sinus were retrospectively analyzed to be of help in the diagnosis and treatment. The results were follows: 1. Average age was 54 years old, and eighteen were males and seven were females with a ratio of 2.6:1 2. The most common histopathologic feature was squamous cell carcinoma (19 cases) and others were two cases of adenoid cystic carcinoma, one case of malignant fibrous histiocytoma, mucoepidermoid tumor, histiocytic lymphoma, unidentified malignant tumor. 3. CT findings were sinus opacificaqtion (4%), soft tissue mass (92%), low densities within soft tissue mass (44.%), air densities within soft tissue mass (24%), osteosclerosis (4%), bone destruction (92%), bone displacement (32%), fat plane obliteration (76%). 4. CT in the malignant maxillary sinus tumors approved the value in evaluation of tumor extension to nasal cavity, ethmoid sinus, orbit, infratemporal fossa, pterygopalatine fossa, pterygoid fossa, pterygoid muscle, cheek skin and intracranial cavity. 5. Twenty four cases (96%) were stage Ⅲ, stage Ⅳ according to AJCC TNM classification. 6. Bone findings were destruction, displacement, sclerosis and most frequent site of bone destruction was the medial wall of the antrum(92%). 7. Tumor growth pattern showed destructive pattern in 18 cases(72%), and squamous cell carcinoma showed destructive pattern. (P<0.05)

• Investigative Magnetic Resonance Imaging
• /
• v.19 no.3
• /
• pp.196-199
• /
• 2015

Obstructed hemivagina and ipsilateral renal anomaly (OHVIRA) syndrome is an uncommon congenital abnormality of the female urogenital tract characterized by the triad of uterine didelphys, obstructed hemivagina, and ipsilateral renal agenesis. A 13-year-old female presented with acute lower abdominal pain. Magnetic resonance imaging (MRI) revealed uterine didelphys, hematometrocolpos, obstructed hemivagina, and right ipsilateral agenesis, consistent with OHVIRA syndrome. Also, a well-defined mass with fluid signal intensity, mimicking adnexal neoplasm was seen in the right lower pelvic cavity adjacent to the posterior wall of the bladder. Vaginal septotomy and drainage of hematometrocolpos were done initially, but unilateral hysterectomy was later performed to relieve the patient's symptoms. The cystic mass in the right lower pelvic cavity was also excised and confirmed as a blind megaureter.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.312-317
• /
• 2001

Modifying effects of the rectangular forward step for suppressing the unsteady pressure fluctuation during interaction between the upstream vortical flow with the edge are studied numerically. The vortical flow is modeled by a point vortex, and the unsteady pressure coefficient is obtained from the velocity and the potential field. To investigate the effects of the edge shape the rectangular forward step is chamfered with various angles. Calculation show that the pressure peaks become decreased by increasing the vortex height as well as the chamfering angle. The pressure amplitudes are very sensitive to the change of the initial vortex height. From this study we can find out that the chamfered edge has two effects; the one is that it suppresses the pressure amplitude generated from the edge, and the other is that it decreases the time variation of unsteady pressure fluctuation. These modifying concepts can be applied to attenuate the self-sustained oscillation mechanism at the open cavity flow.

• Solar Energy
• /
• v.17 no.3
• /
• pp.59-66
• /
• 1997

The present study adopted the PTV method for the velocity acquisition. The system consists of an image grabber built-in a personal computer and a laser-based sheet light projector and particle identification softwares. Velocity vectors are obtained, by PTV and they are used as velocity components for Poisson equation for pressure. Related boundary conditions and no-slip condition at solid wall and the linear velocity extrapolation on the upper side of cavity are well examined for the present study. For calculation of pressure, resolution of grid is basically $40{\times}40$ and 2-dimensional uniform mesh using MAC staggered grid is adopted. The result of experiment reveal that, newly suggested measuring method is capable of estimating pressure and velocity distribution of flow field reasonably.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.3
• /
• pp.185-194
• /
• 1984

The finite analytic method is extended to solve the steady two dimensional Navier-Stokes equation of stream functions and vorticity in polar coordinate system. The method is applied to calculate laminar flows in a sector cavity where the motion is induced by the rotation of the outer wall. Numerical solutions are obtained in the range of Reynolds number 0 to 5000 and aspect ratios 0.50, 1.20, 1.60 and 1.92. The finite analytic method is verfied to be accurate and fast convergent at high Reynolds numbers. It is promising as a numerical method of viscous flows and heat transfer. Flows in sector cavities show different flow structures and formation of secondary vortex with aspect ratios and Reynolds numbers in comparison with rectangular cavities.