• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.104-111
• /
• 2016

The flame stabilization is one of the topics which have to be solved for the airbreathing propulsion systems, using the entering air which is supersonic velocity as an oxygen sources. Making a recirculation zone with an eddy flow, installed the reducing velocity devices such as the bluff body, is the typical method of the flame stabilization. Recently using a cavity flame stabilization at the wall is an emerging technique as an effective method which extends the stabilization zone, and the related research papers have been published on the flow separation and reattachment, pressures and oscillations including length/depth ratios in the cavities. Even though, still there are lots of topics to study more in the cavity flame stabilization field as the preceding techniques, as well as the research and the development of the airbreathing propulsion system itself.

• Journal of Chest Surgery
• /
• v.11 no.1
• /
• pp.65-68
• /
• 1978

The unusual congenital anomaly, double chambered right ventricle due to aberrant muscle band with intact ventricular septum in 10 years old female patient is presented. The pressure gradient is 70mmHg between inflow tract and outflow tract of right ventricle and the aberrant muscle band is 2X4.5cm arising below the infundibulum and traverses the right ventricular cavity, extending from its anterior wall to the crista supraventricularis forming broad triangular base in parietal anterior wall. By resecting out this muscle band clearly, the outflow tract obstruction is completely relieved.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.271-273
• /
• 2001

In precise measurement of air kerma with cavity ionization chambers, the effect of wall attenuation and scatter are corrected by Kwall and that of nonuniformity by Knu. Using the EGS4 code, we calculated these two correction factors. Correction factors calculated for two different-sized cylindrical ionization chamber differ by up to 0.7% from those obtained by measurements.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1240-1244
• /
• 1992

Human sparganosis caused by Sparganum mansoni, the larval plerocercoid worm of the genus Spirometra, is not uncommon in Korea and is mostly found in subcutaneous or adipose tissue of the abdominal, thoracic wall and inguinal region, but is rarely found in the orbital cavity, brain and breast. It, at present, is a surgical disease because its diagnosis depends almost on the demonstration of the larva[e] from lesion or finding the worm section in surgical pathology specimens. We experienced a case of human sparganosis from a 48 years old woman who had a history of eating a raw frog. We report the case and review the related literatures.

• Journal of Chest Surgery
• /
• v.12 no.2
• /
• pp.97-100
• /
• 1979

Primary intrathoracic neoplasms occur frequently, and the most frequent intrathoracic tumors are of pulmonary or bronchogenic origin. Second in frequency are mediastinal tumors, and least frequency or comparatively rare are the neoplasms arising from the wall of the thorax and extending into the thoracic cavity. Of all intrathoracic tumors, fibroma is extremely rare. Recently, we have experienced a huge rapid growing intrathoracic fibroma originating from thoracic wall, which is removed successfully and confirmed histopathologically. Authors present one case of fibroma and discussion with a brief review of the relevant literatures.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.639-643
• /
• 2002

The main purpose of this study was to investigate the formation mechanisms of imperfections such as irregular humps, outer cavity and inner cavity in the laser fusion zone of diamond saw blade. Laser beam welding was conducted to join two parts of blade; mild steel shank and Fe-Co-Ni sintered tip. The variables were beam power and travel speed. The microstructure and elements distributions of specimens were analyzed with SEM, AES, EPMA and so on. It was found that these imperfections were responded to heat input. Irregular humps were reduced in 10.4∼17.6kJ/m heat input range. However there were no clear evidences, which could explain the relations between humps formation and heat input. The number of outer cavity and inner cavity decreased as heat input was increased. Considering both possible defects formations mechanisms, it could be thought that outer cavity was caused by insufficient refill of keyhole, which was from rapid solidification of molten metal and fast molten metal flow to the rear keyhole wall at low heat input. More inner cavities were found near the interface of the fusion zone and sintered segment and in the bottom of the fusion zone. Inner cavity was mainly formed in the upper fusion zone at high heat input whereas was in the bottom at low heat input. Inner cavity was from trapping of coarsened preexist pores in the sintered tip and metal vapor due to rapid solidification of molten metal before the bubbles escaped.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.501-508
• /
• 2008

Small injection molded articles such as lens and mobile product parts are usually molded in multi-cavity mold. The problem occurring in multi-cavity molding is flow unbalance among the cavities. The flow unbalance affects the dimensions and physical properties of molded articles. First of all, the origin of flow unbalance is geometrical unbalance of the delivery system. However, even the geometry of the delivery system is well balanced, cavity unbalance occurs. This comes from the temperature distributions in the cross-section of runner. Temperature distribution depends upon injection speed because heat generation near runner wall is high at high injection speed. Among the operational conditions, injection speed is the most significant process variable affecting the filling unbalances in multi-cavity injection molding. In this study, experimental study of flow unbalance has been conducted for various injection speeds and materials. Also, the filling unbalances were compared with CAE results. The dimensions and weights of multi-cavity molded parts were examined. The results showed that the filling unbalances vary according to the injection speeds and resins. Subsequently, the unbalanced filling and pressure distribution in the multi-cavity affect the dimensions and physical states of molded parts.

• International Journal of Korean Welding Society
• /
• v.2 no.1
• /
• pp.21-24
• /
• 2002

The main purpose of this study was to investigate the formation mechanisms of imperfections such as irregular humps, outer cavity and inner cavity in the laser fusion zone of diamond saw blade. Laser beam welding was conducted to join two parts of blade; mild steel shank and Fe-Co-Ni sintered tip. The variables were beam power and travel speed. The microstructure and elements distributions of specimens were analyzed with SEM, AES, EPMA and so on. It was found that these imperfections were responded to heat input. Irregular humps were reduced in 10.4∼l7.6kJ/m heat input range. However there were no clear evidences, which could explain the relations between humps formation and heat input. The number of outer cavity and inner cavity decreased as heat input was increased. Considering both possible defects formations mechanisms, it could be thought that outer cavity was caused by insufficient refill of keyhole, which was from rapid solidification of molten metal and fast molten metal flow to the rear keyhole wall at low heat input. More inner cavities were found near the interface of the fusion zone and sintered segment and in the bottom of the fusion zone. Inner cavity was mainly formed in the upper fusion zone at high heat input whereas was in the bottom at low heat input. Inner cavity was from trapping of coarsened preexist pores in the sintered tip and metal vapor due to rapid solidification of molten metal before the bubbles escaped.

• Journal of Chest Surgery
• /
• v.12 no.1
• /
• pp.61-66
• /
• 1979

This is a report of a case of tuberculous esophageal perforation, which was surgically treated.. The patient was 32-year-old Korean female patient, who complained swallowing difficulty for` 4 weeks duration. Esophagogram was shown irregular filling defects in the upper one third of esophagus, about 4 cm in length. It was noticed that a small amount of contrast media was leaked out from the involved area of esophagus into the right mediastinum. It was highly suggested that abscess formation was due to perforation of esophageal cancer. Esophagoscopy revealed no definitive evidence of perforation of esophagus, but punch biopsy specimen of esophageal mucosa was shown acute and chronic inflammatory changes. Operation was performed under impression of esophageal cancer. In the right-sided upper mediastinum, a walnut-sized abscess cavity which was connected with esophagus through a fistulous tract was noted. A portion of cavity submitted for frozen section was shown tuberculous inflammation. The abscess cavity, fistula tract, and involved esophageal wall were removed. The perforated esophagus was closed layer by layer. The tuberculous changes were confirmed by histopathologic examination postoperatively. The postoperative course was uneventful.

• Journal of Yeungnam Medical Science
• /
• v.6 no.2
• /
• pp.279-285
• /
• 1989

Inverted papilloma arising from mucous membrane of the nasal cavity and paranasal sinuses is rare benign neoplasm, and usually unilateral arise from lateral wall of nasal cavity. This tumor is histologically benign neoplasm but clinically malignant, because of frequent recurrence and extensive bone destruction. And occasionally, this tumor can be transformed to squamous cell carcinoma or verrucous carcinoma. Recently, We have experienced a case of the inverted papilloma with verrucous carcinoma of the nose and paranasal sinuses and patient expired due to extension of intracranial cavity. We report our case with review of current literatures.