• Tuberculosis and Respiratory Diseases
• /
• 제65권4호
• /
• pp.318-322
• /
• 2008

저자들은 가슴벽의 양측 갈비뼈사이 공간에 발생한 신경집종으로 한쪽의 갈비사이 공간에 발생한 덩어리는 일반적인 신경집종과 달리 피하 방향으로 진행하는 양상을 보였던 양측성 신경집종을 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• 소음진동
• /
• 제7권6호
• /
• pp.945-952
• /
• 1997

This paper shows the feasibility of the suggestion that the angle distribution of incident sound to panels might be gaussian, instead of the conventional uniform distribution in the analysis of transmission loss of panels. To prove the suggestion, the problems with the diffuse sound field in a reverberation room are examined by case studies and the comparision of the prediction with the measurement of sound transmission loss of walls are performed. The results of the comparision show good agreement between the two values.

• Journal of Chest Surgery
• /
• 제24권4호
• /
• pp.357-360
• /
• 1991

Malignant fibrous histiocytoma is the most common soft tissue sarcoma of late adult life. The tumor occurs principally in one of the extremities or in the abdominal cavity or retroperitoneum, but very rarely in the heart. We report a case of M.F.H. that arose from the posterior wall of the left atrium. A 50 years old woman was presented with signs and symptoms of severe congestive heart failure. On 2-D echocardiographic exam, a huge mass was found in the left atrium. The mass was excised under open heart surgery. Histologic examination revealed that the tumor was actually a malignant fibrous histiocytoma.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1070-1072
• /
• 2003

In this paper, Firstly, it is shown that the high vibration source of piping system is the pulsation transmission of pipe line element ,such as, orifice plate, valves and the control valve is a broad band source and the branch wall and the cavity have vortex frequency Secondly, in order to decrese the turbulence vibration of piping system, the practical analysis of piping flow by EFD have been developed and its effectiveness is investigated as applying it at piping system practically.

• 대한치과의사협회지
• /
• 제55권7호
• /
• pp.489-496
• /
• 2017

Oral and maxillofacial cyst is defined as an pathogenic cavity with an lining epithelium and connective tissue wall. Cysts of the jaws and periapical regions vary in histogenesis, treatment and prognosis. Cysts with similar clinical and radiographic can be shown different histopathologic features. Cysts are classified into odontogenic cysts and nonodontogenic cysts. Cysts are also divied into true cysts and pseudocyst. True cysts are lined with an epithelium, however pseudocysts are not lined with epithelium. A periapical cyst, dentigerous cyst and odontogenic keratocyst is clinically common and important lesions at dental clinic.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.57-67
• /
• 1996

The formulation for hybrid-QUICK scheme of convective transport terms in finite-volume calculation procedure is presented. Source terms are modified to apply the hybrid-QUICK scheme. Test calculations are performed for wall-driven cavity flow at Re=$10_2$, $10_3$, and $10_4$. These include the evaluation of boundary conditions approximated by third-order finite difference scheme. The stable and converged solutions are obtained without unsteady terms in the momentum equations. The results using hybrid-QUICK scheme show no difference with those using hybrid scheme at low Re ($=10_2$) and are better at higher Re ($10_3$, and $10_4$).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3491-3496
• /
• 2007

If a molten core is released from a reactor vessel into a reactor cavity during a severe accident, an important safety issue of coolability of the molten core from top-flooding and concrete ablation due to a molten core concrete interaction (MCCI) is still unresolved. The released molten core debris would attack the concrete wall and basemat of the reactor cavity, which will lead to inevitable concrete decompositions and possible radiological releases. In a OECD/MCCI project scheduled for 4 years from 2002. 1 to 2005. 12, a series of tests were performed to secure the data for cooling the molten core spread out at the reactor cavity and for the 2-D long-term core concrete interaction (CCI). The tests included not only separate effect tests such as a melt eruption, water ingression, and crust failure tests with a prototypic material but also 2-D CCI tests with a prototypic material under dry and flooded cavity conditions. The paper deals with the transient simulations on the CCI-2 test by using a severe accident analysis code, CORQUENCH, which was developed at Argonne National Laboratory (ANL). Similar simulations had been already per for me d by using MELCOR 1.8.5 code. Unlike the MELCOR 1.8.5, the CORQUENCH includes a melt eruption mode I and a newly developed water ingression model based on the water ingression tests under the OECD/MCCI project. In order to adjust the geometrical differences between the CCI-2 test (rectangular geometry) and the simulations (cylindrical geometry), the same scaling methodology as used in the MELCOR simulation was applied. For the direct comparison of the simulation results, the same inputs for the MELCOR simulation were used. The simulation results were compared with the previous results by using MELCOR 1.8.5.

• Journal of Chest Surgery
• /
• 제30권9호
• /
• pp.936-940
• /
• 1997

43세 남자 환자가 기침,각혈 등의 심한 호흡기 증상을 주소로 내원하였다. 술전 단순 흉부 X-선 촬영과 단층 촬영에서 좌폐의 213를 차지하는 공동과 균종(mycetoma)을 발견할 수 있었다. 첫 수술에서 공동벽의 심한 유착과 박리증의 공동벽 파열,술전 환자의 호흡 기능을 감안하여 공동 절개술 (cavemostomy)과 흉곽 성형술(thoracoplasty)을 시행하였고 잔존하는 공간과 기관지 늑막루의 완전한 폐쇄를 흉벽 근육성형술(myoplasty)와 대망 충진술(omentoplasty)를 2차로 시행하여 추적 관찰중 좋은 결과를 보였다. 본 증례로 저자등은 심한 호흡 증상으로 전신 상태가 양호하지 못하고 만성쇠약에 빠진 좌폐의 213이상 차지할 만큼 큰 공동을 가진 폐국균증의 경우 대망이나 근육을 이용한 공동 절개술(cavemostomy)를 충분히 고려해 볼만한 수술적 방법임을 알게 되었다.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.710-717
• /
• 1998

The pH changes in 3 cavities prepared at the facial inner dentin and lingual outer dentin of the cervical portion and apical portion of roots filled with calcium hydroxide containing sealers were investigated. 50 extracted permanent teeth with single canal were instrumented with step-back method. An irrigant of 5% NaOCl was used between files. Then 3 small cavities were prepared. The cavity of apical portion and inner dentin cavity of coronal portion was cut a distance of about 1.0mm from the canal wall and outer dentin cavity of coronal portion was cut to a depth of about 0.5mm from root surface. 10 teeth of control group was not filled. 20 teeth were not flushed with 17% EDTA before using root canal sealers and then divided into 2 groups obturated with Sealapex and Apexit. The remaining 20 teeth were flushed with 17% EDTA and 5% NaOCl to remove smear layer and divided into 2 groups obturated with Sealapex and Apexit. The pH change of the dentin in each cavity was measured at 0, 1, 3, 5, 7, 15, 30 days with pH microelectrode(WPI Co., USA). The results were as follows: 1. The groups obturated with Sealapex and Apexit(calcium hydroxide based-sealers) have no increase in the pH level at root dentin. And there is no significant difference in pH level between groups obturated with Sealapex and Apexit(P>0.05). 2. Differences in pH levels between the treated and untreated groups with EDTA were not significant(P>0.05). 3. There is no significant difference in pH level between apical and cervical dentin, inner and outer dentin throughout the duration of the experiment(P>0.05).

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.51-57
• /
• 2007

As a shot sleeve in die casting plays a critical role in delivering molten metal to a die cavity, any disruption to its function in the injection stage results in deterioration of the quality of final castings. To guarantee a smooth operation of a shot sleeve, its structural stability should be maintained. Despite the simple geometry, design of shot sleeve is based on individual engineer's experience and no agreement on the design is present. In this study, we newly propose a systematic methodology to determine a minimum wall thickness of a shot sleeve to prevent yielding or plastic deformation. Analytical calculations incorporating numerical analysis produce a rational design rule for minimum thickness of a shot sleeve subject to metal intensification pressure and geometric die constraint. To validate the proposed design guideline, authors present real data on a collection of actual shot sleeves. Upon checking their conformity to the new design rule, we discovered a strong correlation between the design of wall thickness and premature failures.