• Journal of Chest Surgery
• /
• v.30 no.1
• /
• pp.48-54
• /
• 1997

Between 1987 and 1995, eleven patients with severe chronic corrosive stenosis of the hypopharynx and esophagus underwent surgical restoration of digestive continuity at Inje University Seoul Palk Hospital. There were 7 male and 4 female patients aged from 21 to 47 years (mean, 34 years). The caustic material was acid in 6 patients and alkali in 5 patients. The esophagus was reconstructed using the right colon In 9 and left colon in 2. The cervical approach and the side of proximal anastomosis depended on the status of the pyriform slnus of the hypopharynx. In the neck, J-formed incision was made along the sternocleidomastoid muscle. The sternohyoid and thyrohyoid muscles were divided transversely to expose the thyroid cartilage. Hypopharyngeal opening for proximal anastomosis was made by reverse triangular formed resection of the thyroid cartilage after elevation of perichondrium. Immediately after operation, dysphagia and aspiration into trachea were common, so training of swallowing was required. Feeding gastrostomy was usually maintained for 3 months until restoration of swallowing function was confirmed . There was graft necrosis in 3 patients, who were treated with jejunal free graft. Revisional procedures for stenosis of cervical anastomosis in B patients consisted of widening of pharyngocecostomy site in 2 and resection of adhesive band in one. Return of normal swallowing assuring normal nutrition was obtained in 10 of 11 cases.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.385-391
• /
• 2000

A kinetic study on the preparation of iron powder by hydrogen reduction of ferrous chloride vapor has been carried out both experimentally and theoretically. For the preparation of iron powder, ferrous chloride was vaporized and transported to a reaction zone by Ar gas used as carrier. Ferrous chloride vapor and hydrogen were mixed and subject to a reduction reaction at high temperature to produce iron powder and HCI gas. Iron powder was collected with organic solvent at the end of reaction zone and HCI gas was also absorbed in a caustic soda solution to determine the conversion ratio of ferrous chloride. For the development of rate equations, a 1st-order reaction and equilibration of ferrous chloride vapor with Ar gas were assumed. According to the results, the rate constant, k could be expressed as $k=7,879exp(-53,840/RT)\textrm{dm}^3/mole.sec$ and the activation energy was found to be 53.84kJ/mole. From TEM observation, the particle size distribution of iron powder produced was found to be in the range of $0.1~1.0{\mu\textrm{m}}$ which was not significantly influenced by reaction temperature or gas flow rates.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.55-85
• /
• 1996

지르코니아 분말은 ZrO2 결정상이 온도변화에 따라 부피변화를 수반하는 상전이변태를 나타낸다. 단사정 ZrO2가 110$0^{\circ}C$에서는 정방정으로, 2$700^{\circ}C$ 내외에서는 입방정으로 결정구조가 가역적으로 변한다. 이 ZrO2에 금속산화물을 고용시키면 형석 (CaF2:Florite)형의 입방정 결정구조가 실온에서도 안정하게 존재하게 된다. 안정화제 산화물은 caO, MgO등 2가 산화물외에 3가 또는 4가의 금속산화물로서 Sc2O3, Y2O3, Sm2O3, Nd2O3, Gd2O3, Y2O3, CeO2 등이며 이들은 금속이온의 원자가가 변하기 쉬운 희토류 산화물이다. 안정화 지르코니아는 형석형 결정구조이며 결정화학적으로 보면 금속양이온이 산소이온에 대해서 정육면체형의 8배위를 하고 있다. 이때 이온반경비(양이온/음이온)에 따라 Zr+4자리와 O-2자리의 격자위치와 모양이 형성되므로 비틀어진 정육면체구조이건 이상적인 정육면체 형석구조를 이룬다. 이는 지르코니아의 결정상의 2상-3상인 부분안정화 지르코니아다결정체(PSZ : partially stabilized zirconia)이거나 단일상-2상인 정방정 지르코니아다결정체(TZP : tetragonal zirconia polycrystal)의 결정구조를 가지는데 기인한다. PSZ는 주로 MgO, CaO를 안정화제로 고용시켜 입방정 영역에서 소결하고 이를 다시 입방정과 정방정의 상 영역에서 열처리하여 입방정 입자내부에 정방정을 석출 형성시킨 것이며 TZP는 Y2O3 및 CeO2를 고용시켜 PSZ와 다르게 일반적인 상압소결한 정방정 결정상의 미립자이다. 산화지르코늄 분말은 지르콘사에서 열분해시킨 지르코늄소결.융해괴(caustic fusion clinker)를 산처리하여얻어진 지르코늄산용액(zirconyl acid solution : cloride, sulfide, nitride 등)으로부터 제조된다. 고순도 산화지르코늄은 용액 결정석출법에 의해 ZrOCl2.8H2O, 5ZrO2.3SO3.15H2O, ZrO(NO3)2.xH2O 등의 지르코늄 수화물만을 재결정화시킨 것으로부터 얻을 수 있으며 이 지르코늄염 수용액으로부터 입자미세구조를 효과적으로 제어하여 산화지르코늄 및 안정화 지르코니아 분말제조가 가능하다. 안정화 지르코니아 분말은 ZrO2와 안정화산화물의 고용을위하여 가열처리를 필요로 하며 일정온도에서 최적상태로 숙성하므로서 2가지 상(phase) 이상의 고용체를 가지게 된다. 안정화 지르코니아 분말은 고용처리온도를 낮추고 효과적으로 생성시키기 위해서는 지르코늄 및 안정화제염을 혼합하고 습식 직접합성하여 저온에서 고용체의 합해진상 영역을 생성시키는 것이다. 이는 지르코니아 원료분말의 미세구조를 제어하므로서 가능하며 이때 화학성분조성과 크기형태가 균일하게 분포된 입자분말을 얻을 수 있다.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.112-117
• /
• 1979

By using the existing caustic refining system with a minimum modification and by using a combination of various emulsifiers(0.2 % sodium hexametaphosphate. 0.05 % sodium lauryl sulfate and 0.001 % dioctyl sodium sulfosuccinate), a new economical dewaxing process for sunflower seed oil was developed in order to reduce the cost of the dewaxing process. The results indicate that the waxes can be removed satisfactorily from the sunflower seed oil by emulsifying. batchwise or continuously, the oil with the aqueous surfactant solution, followed by centrifugation at ambient temperatures $(16{\sim}27^{\circ}C)$. Dewaxing loss for the batch process was satisfactory for both low wax-and high wax-crude oil, whereas dewaxing loss for the continuous process needs to be improved. The results indicate that initial level of wax content (low wax vs. high wax) did not affect the loss for batch process (0.82 % vs. 0.62 %), but affected the loss for continuous processes, regardless of the type of mixing mode (2.28 % and 5.68 % for low wax-and high wax-oil, respectively). It was also noted that the type of mixing mode (centactor vs. static mixer) for the continuous process affected the loss, regardless of the wax content (5.2 % and 2.8 % for contactor and static mixer, respectively).

• Journal of The Korean Astronomical Society
• /
• v.55 no.4
• /
• pp.123-130
• /
• 2022

We present the analysis of a planetary microlensing event OGLE-2019-BLG-0362 with a shortduration anomaly (~0.4 days) near the peak of the light curve, which is caused by the resonant caustic. The event has a severe degeneracy with ∆𝜒² = 0.9 between the close and the wide binary lens models both with planet-host mass ratio q ≃ 0.007. We measure the angular Einstein radius but not the microlens parallax, and thus we perform a Bayesian analysis to estimate the physical parameters of the lens. We find that the OGLE-2019-BLG-0362L system is a super-Jovian-mass planet $M_p=3.26^{+0.83}_{-0.58}M_J $ orbiting an M dwarf $M_h=0.42^{+0.34}_{-0.23}M_{\odot}$ at a distance $D_L=5.83^{+1.04}_{-1.55}kpc$. The projected star-planet separation is ${\alpha}_{\bot}= 2.18^{+0.58}_{-0.72}AU$, which indicates that the planet lies beyond the snow line of the host star.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.111-118
• /
• 2014

The electrochemical properties using the cells assembled with the synthesized $LiCoO_2$(LCO) were evaluated in this study. The LCO was synthesized from high-purity cobalt sulfate($CoSO_4$) which is recovered from the cathode scrap in the wastes lithium ion secondary battery(LIB). The leaching process for dissolving the metallic elements from the LCO scrap was controlled by the quantities of the sulfuric acid and hydrogen peroxide. The metal precipitation to remove the impurities was controlled by the pH value using the caustic soda. And also, D2EHPA and $CYANEX^{(R)}272$ were used in the solvent extraction process in order to remove the impurities again. The high-purity $CoSO_4$ solution was recovered by the processes mentioned above. We made the 6 wt.% $CoSO_4$ solution mixed with distilled water. And the 6 wt.% $CoSO_4$ solution was mixed with oxalic acid by the stirring method and dried in oven. $LiCoO_2$ as a cathode material for LIB was formed by the calcination after the drying and synthesis with the $Li_2CO_3$ powder. We assembled the cells using the $LiCoO_2$ powders and evaluated the electrochemical properties. And then, we confirmed possibility of the recyclability about the cathode materials for LIBs.

• Journal of Korean Society of Forest Science
• /
• v.58 no.1
• /
• pp.23-26
• /
• 1982

The chemical components in sap and heart wood of Q. variabilis and Q.serrate grown in Mt. Jiri were analyzed Q. variabilis ash contents were 0.57%, in sap wood portion and 1.00% in heart wood. Of the extractives cold water extractives were 5.74% in sap wood and 4.77% in heart wood. Hot water extractives were 6.33% in sap, 6.30% in heart wood portion. 1% caustic soda extractives were 15.52% in sap wood and 15.63% in heart wood. Alcohol-benzol extractives were 4.89% in sap wood and 2.96% in heart wood Holocellulose contents were 73.19% in sap wood, 78.83% in heart wood. Lignin contents were 21.76% in sap wood and 18.14% in heart wood portion. In pentosan contents there were 15.92% in sap wood and 26.50% in heart wood. In Q serrata ash contents were 0.26% in sap wood and 0.27% in heart wood. Cold water extractives were 2.81% in sap wood and 2.04% in heart wood. Hot water extractives were 5.32% in sap wood and 7.08% in heart wood portion. 1%-C austic soda extractives were 15.73% in sap wood and 16.55% in heart wood. Alcohol-benzol extractives were 3.93% in sap wood and 3.51% in heart wood. Holo celluloe contents were 74.21% and 74.84% in sap and heart wood portion respectively. Lignin contents were 14.11% in sap wood and 19.19% in heart wood. Of the pentosan contents there were 20.75% and 21.44% in sap and heart wood respectively. In conclution ash, holocellulose, lignin and pentosan contents showed always consistent differences between sap and heart wood in Q.variabilis, but in Q.serrata only lignin content showed slight difference between sap and heart wood.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.12.2-13
• /
• 1983

Corrosive injuries of the esophagus by accident or suicidal attempt, though decreasing in number, still represent an important problem of our national pathology. One of the most difficult problems facing any physician is the diagnosis and management of caustic ingestion. In order to determine the extent of esophageal bums, to prevent the potential complication, to increase the therapeutic effect, the use of esophagoscopy is an essential step, and it has lessened an unnecessary admission and treatment. The authors have found the value of early esophagoscopy in selected 41 corrosive esophagitis patient who were admitted to Dept. of ENT, Wonju medical college, Yonsei university between 1980. 1-1982. 12

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.2
• /
• pp.3-30
• /
• 1979

Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.