• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.115-130
• /
• 1998

An analysis on landslide types and susceptibilities associated with geomorphic characteristics has been conducted with 916 landslide inventories in Yeonchon-Chulwon District, where two day's heavy rainfall was concentrated on July, 1996. The precipitation during the 2 days, which is equivalent to 0.372 of event cofficient, can cause large landslides based on Olivier's equation. Sliding materials are dominantly composed of debris mixed with rock fragments and soil derived from colluvium and residual soils. 66% of the landslides are belong to debris flow md 23% are due to sediments flow, in accordance with the classification of sliding materials. Most of landslides(> 90%) are small and shallow, less than l00m in length and about 1m in depth, and classified as transitional type. Granite is more susceptible as much as 4.7 times than metamorphic rocks and 2.7 times than volcanic rocks, probably due to higher weathering grade of granite. The highest landslide frequency is concentrated on the areas between 200 and 300m in height and on the slopes between $10-20^{\circ}$ in dgree. More than 50% of landslides occurred under these geomorphic conditions. Consequently, colluviums and residual soils distributed on the gentle slopes are most susceptible to the landslides of the area.

• Journal of Environmental Impact Assessment
• /
• v.16 no.2
• /
• pp.143-156
• /
• 2007

This study has researched the management status and the pollution level of water, soil, stream sediments of 11 abandoned coal mines out of a total of 12 within Obong-Dam area except Bukyung mine, which was submerged when constructing Obong-Dam, and selected areas which are in needs to have pollution control facilities in the first place. From the results of examination on the runoff at the waste rock pile and mineheads, the runoff from Sueun mine (pH, Fe, Al), Samwon mine (pH, Al), Wangdo mine (pH, Al), Mose mine (pH, Fe, Al) and Daeryeong mine (pH) exceeded the permissible discharge standards of the water quality, but the water at merging point with Obong-Dam after joined with Doma branch satisfied both Water Quality Standards and Drinking Water Quality Standards. In regard to groundwater contamination, it is found that areas where exceeded the Drinking Water Quality Standards are Wangdo mine (pH), Jangjae mine (pH, Zn), Daeryeong mine (pH) whereas all areas satisfied Soil Contamination Warning Standards of Soil Environmental Conservation Law. When comparing a research result on underwater sediments of branches of abandoned mines to the EPA Guidelines for classification of great lakes harbor sediments, Dongguk Gaerim (Fe), Jungwon mine (Fe), Daebo mine (Mn), Samwon mine (Mn) and Daeryeong mine (Mn) showed mid-level of contamination, whereas Sueun (Fe, Mn), Daebo mine (Fe), Woosung mine (Fe, Mn), Wangdo mine (Fe, Mn), Mose mine (Fe) and Daeryeong mine (Fe) showed high-level of contamination. In addition, contamination levels of underwater sediments in Wangsan and Doma branch where abandoned mine's branches merge together, Wangsan branch showed no contamination at all whereas Doma branch shows mid-level of contamination which reflect the Doma branch is affected by waste rock pile and minehead runoff of the abandoned mines in the Doma branch area. It is concluded that Mose mine and Sueun mine required treatment of acid mine drainage. and Wangdo, Jungwon, and Samwon mines were in need of mine tailing and erosion control work. The Samwon mine additionally required a control system for closed minehead runoff. Although the Samwon mine reached a high concentration of Al, Mn $Ca^{2+}$, $SO{_4}^{2-}$ in the runoff, the levels decreased after it was combined with a tributary. It has been concluded that after further monitoring of the cause of pollution, a preventive measure system may be needed to be built.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.189-201
• /
• 2013

To study characteristics of the water quality in the Hansan-Geoje bay, we analyzed the long term monitoring data collected at the two sites during the period of 1987~2010. The trophic state of the waters in Hansan-Geoje bay was the mesotrophic level by the classification of Wasmud et al.[2001]. The water nutrients increased steadily from a wet season (Aug.), it reached the maximum concentration peak in a dry season (Nov.), and then decreased steadily to the winter, it reached at the minimum value in May in the next year. The result of factor analysis divided the waters of Hansan-Geoje bay into the five factors (nutrient, season, inflow land water, pollution, internal production) and the factors represented the 76.82% on the status of the waters. According to time series analysis, temperature, DO and bottom DIP were increased, and pH and COD were decreased during the period of 1987~2010. In particular, the fluctuation trend of DIN has been turned from oversupply to shortage by the N/P ratio since before and after 1990's. The water quality of the Hansan-Geoje bay has been recovered except DIP since 1987, despite of its geographical characteristic which is a general semi-closesd bay and a massive aqua-culture ground. To preserve the waters in Hansan-Geoje bay, we need to know on the cause of the increase or accumulation of DIP, and we should continue to study on the interrelation between the aqua-culture and water environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.250-255
• /
• 2017

When an earthquake occurs, it is necessary to evaluate the site-specific ground response while considering ground characteristics in seismic design. The design seismic force of Korean seismic design criteria is borrowed from the Uniform Building Code(UBC-1997). However, the criteria are based on the ground characteristics of the United States, which are different from the ground characteristics in Korea, and using them could cause over-or under-designing. Therefore, it is important to develop a proper design response spectrum for Korean ground characteristics. In this study, 158 ground sites in Korean urban areas were selected and compared to those in the western part of the United States, and their site-specific ground responses were analyzed. The classification standard in the seismic design criteria classifies the 158 sites into 37 sites, 107 sites, and 14 sites. Using 7 earthquake inputs, the criteria were compared for each group.The Korean design response spectrum underestimates the amplification of the short-period range and overestimates the amplification in the long-period range. There were large differences in the results of the and sites,which account for 77 percent of the 158 sites. Therefore, there is a need to modify the amplification factor in the Korean seismic criteria to properly reflect Korean ground characteristics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.615-623
• /
• 2020

In order to prevent the dangers of major marine accidents, it is very important to be aware of in advance through marine incidents in the background of Heinrich's law, formulated by the safety pioneer who is credited with focusing on workplace safety with emphasis on the human element. At least 11 cases of collision accidents occurred in the Busan VTS area from January 1st to December 31st, 2019, and 24 cases of VTS marine incidents were reported during the same period. According to Heinrich's law, there could be many more potentially risky situations besides the 24 reported cases. In this study, the criteria for VTS marine incidents were established through advanced research and a survey of VTS operators, and analysis of 24 cases of VTS marine incidents in the Busan VTS area. Traffic surveys were conducted for three days to identify potentially hazardous situations. According to the survey, there were 216 cases of VTS marine incidents, and within a year, it is estimated there could be about 26,280 cases. Even if conditions such as "missing VHF communication feedback" which is an important cause of marine incidents, are not reflected, there are many potential risks in the VTS area. Thus, it is vital to strengthen the VTS marine incident reporting system.

• Journal of Yeungnam Medical Science
• /
• v.9 no.2
• /
• pp.302-311
• /
• 1992

Talus is a important structure of the ankle joint and its function is critical for ambulation and weight bearing. The talus fracture is rare, but the complications of fracture and dislocation are serious and resulting in avascular necrosis, osteoarthritis. So its treatment is carefully considered at initial status. Authors reviewed 11 cases of fracture and dislocation of the talus treated at Yeungnam university hospital from 1984 to 1991. The longest follow up was 8 years and shortest, 1 year. The results were as follows. 1. There were all males, the average age was 30 years old. 2. The most common cause was fall down(8 cases), and next traffic accident(2cases), sports injury(1 case). 3. According to Marti-Weber classification, 1 cases was type I, 1 in type II, 4 in type III and 5 in type IV. 4. The method of treatment were open reduction and internal fixation in 6 cases, the others were closed reduction in 5 cases. 5. Final results(by Hawkins grading system) were as follows, 3 cases were excellent, 4 cases were good, 1 case was fair and 3 cases were poor. 6. Complications were AVN in 2 cases, degenerative arthritis in 8 cases, malunion in 1 case. 7. The range of motion of the ankle joint was relatively preserved(74%), but in the subtalar joint it was decreased(43%).

• Journal of Yeungnam Medical Science
• /
• v.10 no.1
• /
• pp.197-211
• /
• 1993

Recently, the Supracondyle fracture of the femur is so severe and comminuted that it is difficult to treat open reduction and rigid fixation sufficiently due to violent traffic accident and external forces. The associated injuries are accompanied variously. So complications of the supracondyle fractures including joint stiffness, delayed union, infection are serious. However development of internal implant and operation skill result in relatively satisfactory function than conservative management. The authors reviewed 20 cases of the supracondyle fracture of the femur treated at Yeungnam University Hospital from 1989, Dec. To 1992, Jan. The results were as follows : 1. The male was common(70%). The 2nd-4th decade was most(87%). 2. The most common cause of injuries was traffic accident. The rate of open fracture was 35%, most of it was traffic accident. 3. According to the ASIF group classification. 4 cases were type A, 4 in type B, 12 in type C (10 in type $C_2$&$C_3$). 4. Accompanied injuries included multiple fractures in 9 cases and femoral artery injury in 1 case. 5. Among the 20 cases, conservative treatment was done in 5 cases and operative treatment was done in 15 cases. 6. Functional results (by Schatzker criteria) were as follows. The satisfactory results were achieved in 40% of cases in conservative treatment and 67% in operative treatment. 7. The average time of partial weight bearing was 15 weeks. 8. Complications were knee stiffness in 6 cases and 4 in delayed union.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.64-73
• /
• 2020

As Korean government and safety-related organizations make continuous efforts to reduce the number of industrial accidents, accident rate has steadily declined since 2010, thereby recording 0.48% in 2017. However, the number of fatalities due to industrial accidents was 1,987 in 2017, which means that more efforts should be made to reduce the number of industrial accidents. As an essential activity for enhancing the system safety, accident analysis can be effectively used for reducing the number of industrial accidents. Accident analysis aims to understand the process of an accident scenario and to identify the plausible causes of the accident. Accident analysis offers useful information for developing measures for preventing the recurrence of an accident or its similar accidents. However, it seems that the current practice of accident analysis in Korean manufacturing companies takes a simplistic accident model, which is based on a linear and deterministic cause-effect relation. Considering the actual complexities underlying accidents, this would be problematic; it could be more significant in the case of human error-related accidents. Accordingly, it is necessary to use a more elaborated accident model for addressing the complexity and nature of human-error related accidents more systematically. Regarding this, HFACS(Human Factors Analysis and Classification System) can be a viable accident analysis method. It is based on the Swiss cheese model and offers a range of causal factors of a human error-related accident, some of which can be judged as the plausible causes of an accident. HFACS has been widely used in several work domains(e.g. aviation and rail industry) and can be effectively used in Korean industries. However, as HFACS was originally developed in aviation industry, the taxonomy of causal factors may not be easily applied to accidents in Korean industries, particularly manufacturing companies. In addition, the typical characteristics of Korean industries need to be reflected as well. With this issue in mind, we developed HFACS-K as a method for analyzing accidents happening in Korean industries. This paper reports the process of developing HFACS-K, the structure and contents of HFACS-K, and a case study for demonstrating its usefulness.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.717-722
• /
• 2011

Currently, melamine is being used variously in our lives such as resins, flame retardants, adhesive, laminate etc. And understandably sewer of stream of wastewater containing Melamine has also increased. GHS (Globally Harmonized System of Classification and Labelling of Chemicals) of EU safety guidelines says that it can cause cancer. Still, study on toxicity of Melamine is going on. In this research, melamine contamination level of the Han River and River Basin was analyzed by HPLC/UV. And the experiments of GAC adsorption were conducted and the model was studied. We collected the 3 same samples at the suburbs of Paldang Dam located in the relative upstream in Han River and Ttukseom amusement park, the downstream region and collected samples equally at the Hongreung stream, Wangsuk stream, Cheonggye stream among streams flowing into Han River and then measured Melamine concentration after purification. As a result, melamine was not detected at the suburbs of Paldang Dam and it was detected at Ttukseom amusement park, the downstream of it, in the concentration of $0.312{\mu}g/L$. The Wangsuk stream with $0.578{\mu}g/L$ highest Cheonggye stream and Hongreung stream was detected with each $0.197{\mu}g/L$ and $0.325{\mu}g/L$. Although the concentration was low in general, melamine detection could be checked at most point. In 1970, the world capacity of Melamine was estimated at 200,000 ton, with current production estimated to be 1,400,000 ton. Melamine of Han River and rivers flowing into Han River is present at low concentration but pollution will increase in the future due to increase of use. Depending on the size of activated carbon in the experiment were slightly different. But the breakthrough model is almost identical.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.3
• /
• pp.187-194
• /
• 2012

Prostate cancer is one of the most frequent cancers in men and is a major cause of mortality in the most of countries. In many diagnostic and treatment procedures for prostate disease, transrectal ultrasound(TRUS) images are being used because the cost is low. But, accurate detection of prostate boundaries is a challenging and difficult task due to weak prostate boundaries, speckle noises and the short range of gray levels. This paper proposes a method for automatic prostate segmentation in TRUS images using its average shape model and invariant features. This approach consists of 4 steps. First, it detects the probe position and the two straight lines connected to the probe using edge distribution. Next, it acquires 3 prostate patches which are in the middle of average model. The patches will be used to compare the features of prostate and nonprostate. Next, it compares and classifies which blocks are similar to 3 representative patches. Last, the boundaries from prior classification and the rough boundaries from first step are used to determine the segmentation. A number of experiments are conducted to validate this method and results showed that this new approach extracted the prostate boundary with less than 7.78% relative to boundary provided manually by experts.