• Macromolecular Research
• /
• 제15권6호
• /
• pp.498-505
• /
• 2007

This study demonstrated the in-situ functionalization with polymers of multi-walled carbon nanotubes (MWNTs) via emulsion polymerization. Polystyrene-functionalized MWNTs were prepared in an aqueous solution containing styrene monomer, non-ionic surfactant and a cationic coupling agent ([2-(methacryloyloxy)ethyl]trime-thylammonium chloride (MATMAC)). This process produced an interesting morphology in which the MWNTs, consisting of bead-string shapes or MWNTs embedded in the beads, when polymer beads were sufficiently large, produced nanohybrid material. This morphology was attributed to the interaction between the cationic coupling agent and the nanotube surface which induced polymerization within the hemimicellar or hemicylindrical structures of surfactant micelles on the surface of the nanotubes. In a solution containing MATMAC alone without surfactant, carbon nanotubes (CNTs) were not well-dispersed, and in a solution containing only surfactant without MATMAC, polymeric beads were synthesized in isolation from CNTs and continued to exist separately. The incorporation of MATMAC and surfactant together enabled large amounts of CNTs (> 0.05 wt%) to be well-dispersed in water and very effectively encapsulated by polymer chains. This method could be applied to other well-dispersed CNT solutions containing amphiphilic molecules, regardless of the type (i.e., anionic, cationic or nonionic). In this way, the solubility and dispersion of nanotubes could be increased in a solvent or polymer matrix. By enhancing the interfacial adhesion, this method might also contribute to the improved dispersion of nanotubes in a polymer matrix and thus the creation of superior polymer nanocomposites.

• 폴리머
• /
• 제39권2호
• /
• pp.346-352
• /
• 2015

폴리알파올레핀(PAO)은 유동점, 점도지수, 열/산화 안정성이 광유 기반의 윤활유보다 우수한 합성 윤활유이다. 본 연구에서는 1-펜텐, 1-헥센, 1-옥텐, 및 1-도데센을 단량체로 사용하고 세가지 종류의 알루미늄계 루이스 산촉매로 양이온 중합을 수행하여 다양한 PAO를 합성하였다. PAO 중합 성능과 제조된 PAO의 분자량, 동점도, 유동점과 점도지수를 다양한 중합 조건에서 조절할 수 있었다. 알킬 알루미늄 할라이드계 촉매가 기존의 $AlCl_3$계 촉매에 비하여 촉매 성능이 우수하였다. PAO의 미세구조를 비행-시간형 질량분석기(TOF-MS) 해석을 통하여 PAO의 미세구조와 윤활유로의 성능(점도지수, 유동점)과의 상관관계를 규명하였다. 특히, PAO의 점도지수는 알파 올레핀의 탄소수 증가에 따라 상승하여, PAO의 분지길이가 점도지수와 밀접한 상관관계가 있음을 확인하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2009년도 춘계학술발표회 논문집
• /
• pp.23-28
• /
• 2009

The purpose of this study was to improve not only wet-end performances but also paper characteristics by the modification of various factors like molecular design and ionic characteristics of polyacrylamides First of all physical characteristics were observed after modify molecular design of the cationic polyacrylamides to linear, branched and cross-linked. In addition it was found analysis method to confirm branch degree of cationic polyacrylamides to combine ionic titration characteristics and spectroscopic behavior, After application of these structure modified polyacrylamides to the multiple retention systems with inorganic microparticles, it was found adjusting of branch degree of polyacrylamides was very important to optimize wet-end improvement. Second, After polymerization of amphoteric polyacrylamide to have both of cationic and anionic functional group in the polymer, we observed not only physical characteristics but also wet-end improvement to apply recycled pulp and found that the improvement of solution stability to prevent hydrolysis and increase of ash retention dramatically to compare traditional cationic polyacrylamide retention aid, Finally, After polymerization of anionic polyacrylamide, we observed not only wet-end improvement but also paper characteristics to apply preflocculation of PCC and it was found the improvements of flocculation efficiency, retention, ash retention, optical properties of the paper and bursting strength to compare traditional preflocculant of cationic polyacrylamide.

• Journal of Photoscience
• /
• 제5권3호
• /
• pp.111-120
• /
• 1998

Sensitized photolysis of two onium borates (diphenyliodoium and dimethylphenacylsulfonium tetrakis(pentafluorophenyl)borate, 1a and 2a , respectively) and cationic photopolymerization of an epoxy monomer by the photolysis were investigate. The onium borates were sensitized by the excited singlet of the athracenes(non-substituted, 9-methyl-and 9, 10-dimethylanthracene) and generated acid by decomposing teemselves. The quantum yields of photobleaching of the anthracenes($\Phi$-AH) and acid generatiion (øacid) by the onium borates were the same order as those of the corresponding onium salts in aerated solutions (methanol and acetoitrile) and in argon(Ar) saturated acetonitrile. However, in the photolysis of the iodonium borates 1a in Ar saturated MeOH , øacid was much higher than the corresponding ø-AH. The acid generated by the photolysis of the onium borates initiated cationic polymerization of an epoxy monomer. The values of both rate of polymerization (Rp) and degree of conversion on the photopolymerization for the iodonium borated 1a were higher than those of the sulfoium borate 2a. In the photopolymerization for the iodonium borate 1a, both the Rp value and the degree of conversinio increased upon the addition of glycerol as a hydrogen donor. It is suggested that the increase of both values may be caused with the increase of øacid by addition of glycerol.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.90-90
• /
• 2003

Living nature was appeared in the cationic polymerization of tort-butyl vinyl ether (TBVE), initiated by iodine, carried out in toluene at -78$^{\circ}C$. It was found that the number average molar mass of the resulting polymer (equation omitted) increases linearly as the conversion to polymer increase which reveals that there is no operation of chain transfer or termination process in this system. The polymers having narrow distribution and having molar mass of the resulting polymers are dependent on molar ratio of monomer and iodine.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.150-151
• /
• 2006

Perfluoroaryl boranes are widely employed as co-catalysts in olefin polymerization processes. Perfluoroaryl diboranes, possessing borane centers in close proximity, are a subclass of this family of compounds that are in theory capable of chelating neutral and anionic bases. The resulting anions are exceptionally weakly coordinating. We have prepared examples of such compounds and studied their coordination behavior with neutral Lewis bases that have the capability to bridge Lewis acid sites in an effort to delineate the kinetic and thermodynamic factors that influence bonding mode. When protic Lewis bases such as alcohols or water are reacted with diboranes, strong Bronsted acids capable of initiating cationic polymerizations under unusual conditions result.

• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.69-80
• /
• 2005

A synthesis of azide-terminated glycidyl azide polymer, GAP-A, was carried out by tosylation and azidation of polyepichlorohydrin(PECH) prepared by cationic ring-opening polymerization. Polyepichlorohydrin was prepared by cationic activated monomer polymerization using ethylene glycol and $BF_3{\cdot}OEt_2$ as an initiator and a catalyst at $\~10^{\circ}C$. Tosylation of polyepichlorohydrin was performed using traditional TsCl/pyridine method and was also carried out using TsCl/amine catalysts to reduce the reaction time significantly. Azidation of tosyl-terminated PECH(OTs-PECH) was performed using $NaN_3$ as an azidation reagent in DMF solvent at high temperature and was unexpectedly completed within 2 hours.

• 한국염색가공학회지
• /
• 제7권2호
• /
• pp.1-8
• /
• 1995

Polymer cationic agent was prepared by the initial polymerization of epichlorohydrin followed by amination with diethyl-amine. Cotton fibre treated with the polymer (6∼8% o.w.f.) is highly cationic and exhibit increased substantivity for anionic dyes. The modified substrate could be dyed with direct dyes without salt or a little salt from dye bath. The increased concentration of cationic agents resulted in an increase the colour yield. Futhermore, treated cotton has an electropositive surface charge. Adsorption of direct dye can be attributed to both van der waals force and electrostatic attraction.

• 한국염색가공학회지
• /
• 제7권2호
• /
• pp.70-76
• /
• 1995

The polyepichlorohydrine(poly(ECH)) was prepared by the condensation polymerization of epichlorohydrine. The cationic agent was prepared from poly(ECH) by amination of poly(ECH) with dimethyleneamine. Pretreatment of cellulosic fabric with the poly(ECH)amine produced a modified fabrics that could be dyed under neutral condition with reactive dye using small amount of the salt. Colour yield of cellulosic fabric were increased by increasing salt concentraction. cationic agent concentration. The optimum condition for colour yield was the concentration of cationic agent 5%(o.w.f), that of NaCl 4g/l, and that of $Na_{2}CO_{3}$5g/l. The dyeing of treated fabrics exhibits improved colour yield and high wash fastness.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.31-34
• /
• 2001