• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.199-199
• /
• 2006

Microwave-irradiation has become a common heat source in organic chemistry in the last decade. In recent years, polymer chemists also discovered the advances of microwave heating that include fast and efficient heating as well as the homogeneous heat profile and the easy access to pressurized reaction conditions. In this contribution, we report our investigations on the cationic ring-opening polymerization of 2-oxazolines that lead to a tremendous acceleration from several days to several minutes polymerization time. In addition, the optimized microwave-assisted polymerization procedure was applied for the preparation of libraries of diblock and triblock copolymers that were used for the determination of structure-property relationships in poly(2-oxazoline)s.

• Bulletin of the Korean Chemical Society
• /
• 제17권8호
• /
• pp.679-681
• /
• 1996

• Macromolecular Research
• /
• 제17권4호
• /
• pp.221-226
• /
• 2009

The present study firstly describes the synthesis of novel, thermo-latent initiators based on xanthenyl phosphonium salts with different counter anions and phosphine moieties and secondly examines their efficiency in the bulk polymerization of glycidyl phenyl ether(GPE). The polymerization was performed with phosphonium salt initiators($I_{SbF6}$, $I_{PF6}$, $I_{AsF6}$ and $I_{BF4}$) at ambient temperature to $200^{\circ}C$ for 1 h. The order of initiator activity was $I_{SbF6}>I_{PF6}>I_{AsF6}>I_{BF4}$. To examine the effect of the phosphine moiety on the initiator activity, polymerization was carried out with $I_{SbF6}(Ph_{3}P)$ and $II_{SbF6}(Bu_{3}P)$ at ambient temperature to $170^{\circ}C$ for 1 h. The order of reactivity was $I_{SbF6}>II_{SbF6}$. In general, the conversion percentage increased with increasing polymerization temperature. The thermal stability of these salts was measured by thermo gravimetric analysis(TGA). The solubility of phosphonium salts in various organic solvents and epoxy monomers was also investigated.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.91-91
• /
• 2003

Major factors including solvent and reaction temperature in the cationic polymerization of isobutyl vinyl ether (IBVE), photoinduced in the presence of diphenyliodonium iodide (DPII) zinc iodide in toluene/diethyl ether mixed solvent has been investigated. It was found that the living nature of the propagating species and the tacticity of the resulting polymer is significantly dependent on these factors. The addition of diethyl ether (DEE) results in not only the loss of the cationic living nature but also decrease in the isotactic content.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.173-177
• /
• 2007

Living anionic and cationic polymerizations have been combined to prepare various types of comb-like copolymers composed of polystyrene (PS) and polyisoprene (PI) blocks, with a precisely controlled architecture. According to the relative placement of these elementary building blocks, combs with randomly distributed PS and PI or with poly(styrene-b-isoprene) diblock branches (I & II, respectively) can be prepared. The reaction procedure initially includes the synthesis of a poly(chloroethylvinyl ether) using living cationic polymerization, which is used as the reactive backbone to successively graft $PS^-Li^+$ and $PI^-Li^+$ or $PI-b-PS^-Li^+$ to obtain structures (I) or (II). The synthesis of Janus-type PS-comb-b-PI-combs (III) initially involves the synthesis of a diblock backbone using living cationic polymerization, which bears two distinct reactive functions having either a protected or activated form. Living $PS^-Li^+$ and $PI^-Li^+$ are then grafted, in two separate steps, onto each of the reactive functions of the backbone, respectively.

• 한국군사과학기술학회지
• /
• 제12권2호
• /
• pp.228-235
• /
• 2009

We synthesized glycidyl azide monomer(GAM) as a monomer for polymerization of glycidy azide polymer(GAP) which is a promising energetic prepolymer for a plastic-bonded explosive. Using quantitative real-tim in-situ infrared(in-situ IR) spectroscopy, kinetic study on the cationic ring opening polymerization of GAM was carried out. The reaction rate was obtained from monitoring the change of ether C-O stretching band($1050cm^{-1}$) in series IR spectra. The reaction was in accordance with the first-order reaction law for each of reaction temperature at 100/1 mole ratio of [GAM]/[$BF_3*etherate$]. In the ring opening polymerization of GAM, with ratio of [GAM]/[$BF_3*etherate$] to equal 100/1 at various temperature, the activation parameters obtained from the evaluation of kinetic data were ${\Delta}H^*$=14.34kcal/mol, ${\Delta}S^*=-12.31cal/mol{\cdot}K$ and $E_a$=14.89kcal/mol.

• 한국응용과학기술학회지
• /
• 제20권3호
• /
• pp.243-250
• /
• 2003

Poly(methyl methacrylate)/clay nanocomposite particles with particle size of 275${\sim}$292 nm range were successfully prepared using emulsion polymerization. The content of montmorillonite based on the methyl methacrylate monomer was chosen as 30 wt.%. 2,2-azobis(isobuthylamidine hydrochloride) and n-dodecyltrimethylammonium chloride were used as an initiator and a surfactant in cationic emulsion system. Potassium persulfate and sodium lauryl sulfate were used as an initiator and a surfactant in anionic emulsion system. The evidence of intercalated /exfoliated structure of montmorillonite in the nanocomposite prepared in our experiment was confirmed by wide angle x-ray diffraction patterns of $d_{001}$ plane. Thermal behavior of nanocomposite was traced using DSC and TGA. It was found that the nanocomposite particle prepared by cationic emulsion system showed intercalated structured. We also found that the nanocomposite particle obtained from anionic emulsion system resulted in the fully exfoliated structure.

• 펄프종이기술
• /
• 제46권2호
• /
• pp.46-56
• /
• 2014

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 학술발표초록집
• /
• pp.37-37
• /
• 1987

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.203-209
• /
• 2017

양이온계 광중합에 적용 가능한 propenyl ether 형태의 단량체들을 mono 및 di-functional alcohol과 allyl bromide의 축합반응으로 합성하였다. 이들 단량체들을 양이온 광개시제와 혼용하여 코팅조성물을 제조하여 광경화 반응성을 조사하였다. 그 결과 mono propenyl ether 형태인((prop-1-en-1-yloxy)methyl)benzene (POMB)는 dipropenyl ether 계인 1,4-bis(prop-1-en-1-yloxy) benzene (BPOB) 비교하여 초기 중합 속도는 10.2로 상대적으로 낮게 나타났으나 1.5mol%의 광개시제를 포합한 배합물에서는 90초이내에 거의 정량적으로 반응하였다. 또한 긴알킬기를 갖는 술폰산 염계 광개시제들은 단량체들에 빠른 용해 특성을 나타내었고 산성도가 높은 광개시제인(4-n-decyloxyphenyl)diphenylsulfonium hexafluoroantimonate(DPSA)와 (4-n-decyloxyphenyl) diphenylsulfonium triflate (DPST)를 사용한 경우 비교적 높은 중합속도와 전환율을 나타내었다.