• 전기의세계
• /
• v.23 no.4
• /
• pp.46-52
• /
• 1974

Generally, it has been regarded that there are two kinds of the effect of the electrodes, especially of the cathode in the gas discharge, (a) the effect caused by the difference of the cathode meterial and (b) the effect by the change of the cathode surface state even in the same meterials. Thus the two effects must be investigated independently to study the roles of the cathode in gas discharges. This paper measured sparking voltage in Rare gas (Ar, He) for the change of sparking voltage in repeating sparks and for the effect of (a) and (b) mentioned above, under the condition that the desorption of impurities from the cathod can be nigligible, and it is obtained that the correlative relations of the work function, sparking voltage and secondary coefficient are comparatively simple. In addition, the interesting character of the minimum point of the paschen's curves is found. The results were as follows; 1) The value of (pd)min with minimum pint of sparking voltage, (Vs)min, is 0.7-0.9 Torr. cm in Argon, but is 5.6-7.1 Torr. cm in Helium, and Paschen's curve in Helium shows slow curve than in Argon. 2) The minimum point of the Paschen's curve is satisfied actually Townsend's self sustaining criterion in Argon, but non-satisfaction in Helium, and the Townsend's secondary coefficient .gamma. action have compound property (.gamma.$_{i}$, .gamma.$_{p}$, .gamma.$_{m}$) in Helium. 3) The dependenting character of work function in Helium is less than in Argon. 4) The minimum point of sparking voltage increase under oxidized electrode than clear electrode in Au and Ag, but minimum point decrease in Ni and Cu.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.122-129
• /
• 2000

Field emission behavior from vitreous carbon powders deposited on Mo coated glass by electro-phoretic method was investigated. Although the vitreous carbon has only $sp^2$ hybridized carbon bond, we could observe an excellent field emission behavior. Reproducible electron emission was observed without initiation process which is known to be needed in most carbon cathode materials. Critical electric field for electron emission was in the range from 3 to 4 MV/m. The effective work function was estimated to be about 0.06 eV, as obtained from the slope of Fowler-Nordheim plot. The stability of the emission behavior characterized by repeated I-V measurements, was much superior to the Si tips. We observed the possibility of full area light emission in vitreous carbon materials. This results showed that the field emission is not intimately related to the $sp^3$ hybridization of carbon, but the electrical properties of cathod/electrode interface or the conductivity of the cathode materials which required for the electron transport to the cathode surface.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.65-72
• /
• 2002

This study was to determine the optimum conditions of malt extracting temperature, extracting time of malt in water, ratio of malt to water, and rice volume of malt extract water on saccharification in producing sikhe (sweet rice drink) using central composite design of response surface methodology. Glucose and maltose were analyzed by a biosensor having dual cathode system. The optimum temperatures of malt extracting for glucose and maltose were 60 and $55^{\circ}C$. The saccharification power for the two sugars was highest when malt powder soaked for 6.5 and 5.75 hour, respectively. And ratios of malt to water for optimum saccharification were 1 : 6.3 to 1 : 8.8, respectively. The optimum volumes of malt extracting to rice for the two sugars were 0.48% and 0.6%, respectively. The application of response surface methodology to sikhe processing showed a good correlation with high significance.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.297-303
• /
• 2016

This study was conducted to evaluate the dose of the space to the controller located within the mammography room conducted a research on ways to the reduction exposure to the radiation workers. Results, the dose of 6.18 mGy/year was measured when there is no difference in the hilar area of the controller position, the dose of 2.35E-11 mGy/year was measured when installing the Shielding door. In addition, when the direction of the X-ray tube anode be heading this direction controller, low average level measured was 0.30 mGy/year. Based on this study, the mammography should be considered when installing the anode and cathod directions. And, by installing the shielding door, it must be able to completely separate shooting space and control room. This is the best way radiation protection method in radiation workers.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.56-62
• /
• 2005

Because of the wide plane and the curved field of CRT rear projection high definition television, its MTF(modulation transfer function) can't be easily measured by the usual forward testing method. Then we propose a backward testing method for the MTF so that the object plane and the image analyzer of forward testing are located at positions opposite each other. We prefer to use the backward testing method because the forward testing method has poor accuracy caused by very small numerical aperture, low spatial resolutions, and long depth of focus. We found that the backward testing method was very easy to align and had high repeatability. We confirmed the confidence of results obtained by the backward testing method in comparison with designed results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.126-126
• /
• 1999

본 실험의 목적은 FED의 상부, 하부 전극으로 사용되는 Mo를 건식, 습식 식각함으로써 DED 소자의 공정을 개발하는 것이다. Mo는 $261^{\circ}C$의 높은 융점을 지니고 있으며, 우수한 열적 안정성과 비교적 낮은 비저항을 가지는 재료로써 FED와 같은 전계 방출 소자의 cathod 팁 및 전극물질로 사용되어지는 가장 보편적인 물질이다. FED와 같은 전계방출소자가 갖추어야 할 요건은 전자 방출 영역이 소자 동작시 변형되지 않아야 하고, 기계적 ,화학적, 열적 내구성이 좋아야 함인데 이러한 요건을 충족시킬 수 있고 가장 범용적으로 사용되는 물질이 Mo이다. 실험에서 사용된 Mo는 DC magnetron sputter를 사용하여 Ar 가스를 첨가하여 5mTorr하에서 Si 기판위에 증착속도를 300$\AA$/min로 하여 1.6$\mu\textrm{m}$ 증착하였다. 본 실험의 Mo 식각은 고밀도 플라즈마원인 ICP를 이용하였다. 식각특성은 식각 가스조합, inductive power, bias voltage, 공정 압력의 다양한 공정 변수에 따른 식각특성 변화를 관찰하였다. 식각시 chlorine 가스를 주요 식각 가스로 사용하고 BCl3, O2, Ar을 첨가가스로 사용하였으며, inductive power는 300-600, bias voltage는 120-200V 사용하였고 압력은 15-30mTorr, 기판온도는 7$0^{\circ}C$로 유지하였으며 식각마스크로는 electron-beam evaporator로 1$\mu\textrm{m}$ 증착한 SiO2를 patterning하여 사용하였다. 식각속도는 stylus profiler를 이용하여 측정하였으며 식각후 profile은 scanning electron microscopy (SEM)을 통하여 관찰하였다. 실험 결과 순수한 Cl2 BCl3 가스만을 사용한 경우 보다는 Cl2 가스에 O2를 첨가하였을 때 좋은 선택비를 얻었다. 또한, inductive power와 bias voltage, Mo의 식각속도의 적절한 조절을 통해 SiO2에 대한 선택도를 변화시킬 수 있었다. Cl2:O2비를 1:1로 하고 400W/-150V, 20mTorr의 압력, 7$0^{\circ}C$ 기판온도에서 식각시 200$\AA$/min의 Mo 식각속도, SiO2와의 선택비 8:1을 얻을 수 있었다. 또한 실제 FED 소자 구조형성에 적용한 결과 비등방적인 식각형상을 형성할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1680-1688
• /
• 2004

The information indicating device plays an important part in the information times. Recently, the classical CRT (Cathod Ray Tube) display is getting transferred to the LCD (Liquid Crystal Display) one which is a kind of the FPDs (Flat Panel Displays). The OLED (Organic Light Emitting Diodes) display of the FPDs has many advantages for the low power consumption, the luminescence in itself, the light weight, the thin thickness, the wide view angle, the fast response and so on as compared with the LCD one. The OLED has lately attracted considerable attention as the next generation device for the information indicators. And also it has already been applied for the outside panel of a mobile phone, and its demand will be gradually increased in the various fields. It is manufactured by the vapor deposition method in the vacuum state, and the uniformity of thin film on the substrate depends on the temperature distribution in the point-cell source. This paper describes the basic concepts that are obtained to design the point-cell source using the computational temperature analysis. The grids are generated using the module of AUTOHEXA in the ICEM CFD program and the temperature distributions are numerically obtained using the STAR-CD program. The temperature profiles are calculated for four cases, i.e., the charge rate for the source in the crucible, the ratio of diameter to height of the crucible, the ratio of interval to height of the heating bands, and the geometry modification for the basic crucible. As a result, the blowout phenomenon can be shown when the charge rate for the source increases. The temperature variation in the radial direction is decreased as the ratio of diameter to height is decreased and it is suggested that the thin film thickness can be uniformed. In case of using one heating band, the blowout can be shown as the higher temperature distribution in the center part of the source, and the clogging can appear in the top end of the crucible in the lower temperature. The phenomena of both the blowout and the clogging in the modified crucible with the nozzle-diffuser can be prevented because the temperature in the upper part of the crucible is higher than that of other parts and the temperature variation in the radial direction becomes small.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.1-9
• /
• 2012

LCD(Liquid Crystal Display) commonly used as an output device has a drawback of slow response time compared with CRT display. This drawback causes motion blur especially when an abrupt intensity change occurs in an image sequence as time goes on. To overcome the problem of slow response time overdriving technique has been used in TCON of LCD. In this technique, the previous frame data has to be compressed and stored in an external memory. Considering both chip size of TCON and computational complexity, AM-BTC has been applied to the 8bit HD display driver. However, the conventional method is not suitable for 10 bit Full HD because 10 bit Full HD data is much larger than that of 8 bit HD data. Being applied to 10 bit Full HD display driver, the conventional method increase cost by enlarging the external memory size of TCON or deteriorates image quality. In this paper, we propose dual BTC image coding technique for Full HD display driver that is an adaptive coding scheme according to morphological information of each sample block. Through experiments, it is verified that the proposed Dual BTC method performs better than the conventional method not only quantitatively but also qualitatively.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1009-1015
• /
• 2006

The elcetrodewatering filter press(EDFP) which had anode and cathod plates to be set between filter plates was built for reducing the waterworks sludge and improving performance of dewatering equipment. Several tests to compare the dewaterability with conventional mechanical filter press dewatering(MDEP) and EDFP was conducted through this equipment. As test results, filtration amount discharged from EDFP measured 43.2 kg which increased against MDFP, and cake weight measured 4 kg which was two times against MDFP. The water content of dewatered cake from EDFP was 55wt% and dewatering velocity was 2.3 $kg/m^2{\cdot}cycle$. This water content decrease 20% and dewatering velocity increased 30% with compare to the MDFP. That is to say, EDFP constructed from electrodewatering mechanism increase filtrate discharging amount, which make dewatering velocity increase and produce the low water content dewatered cake against MDFP. Energy consumption of EDFP is analysed to 400 kwh/DS ton. The results to analysis the economical aspect considering the power consumption and the handling cost decline as sludge volume reduction due to producing the low water content cake showed that expenses to handle sludge of 1 ton by dry solid base cut down on 20,000 won. If considering several test aspects, it was analysed that EDFP was excellent in the side of performance as well as economical suitability.

• Journal of Korean Society of Forest Science
• /
• v.18 no.1
• /
• pp.17-22
• /
• 1973

Using of zymography for identification of same clone of Pinus densiflora, the two year old needle leaves of 48 ramtes including 8 clones (6 ramets per clone) were collected in the clone bank which has been established on the near campus of Institute of Forest Genetics, Suwon, in 1962. All 8 bands are named from cathod to anode, G, H, K, M, N, Q, S and Y. Only CB-1 clone shows all bands, while KW-3 clone reveals only 5 bands. Other 6 clones were found 7 bands but the occurred frequencies of those bands are variable among those clones. Though the grafting stock are used various individuals grown seed propagation of P. densiflora, moreover, three stocks have been different species and that one has been P. rigida and two individuals have been P. koraiensis, the zymograms of the ramets belonging to the same clone reveals the identified patterns. The results show that the stocks for grafting have not been affected on the isoperoxidase patterns of their scions in P. densiflora. Among 48 ramets of 8 clones, 4 ramets are found the different isoperoxidase patterns from that of the remained rametes within same clone. Thus, it is conluded that zymography is useful for testing genuineness of the grafted clones of P. densiflora.