• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.132-138
• /
• 1977

Anionic polymerization of ${\varepsilon}$-caprolactam via $SO_2$/KOH catalysis was attempted in order to find an optimal reaction condition and physical properties of the polymers. The yield of conversion was relatively low at low temperature and high at high temperature between $150^{\circ}C\;to\;180^{\circ}C$ regardless of $SO_2$/KOH mole ratio in polymerization of ${\varepsilon}$-caprolactam.The inherent viscosity of nylon 6 obtained via $SO_2$/KOH catalysis was 1.2∼2.7. The kinetic equation for the $SO_2$/KOH catalyzed polymerization has been derived and experimentally verified.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.411-415
• /
• 1973

The reaction between cyanide ion and triphenyl methane dyes is subject to marked catalysis by cationic micelles of cetyltrimethyl ammonium bromide(CTABr) and retarded by anionic micelles of sodium lauryl sulfate(NaLS). Added salts, anions inhibit the catalysis by CTABr, and cations, especially $Zn^{++},\;Cd^{++}$ decrease the retardation of the reaction rates in the presence of NaLS. The kinetic effects of the ionic micelles are much larger in water than in ethanol-water, methanol-water, propanol-water and acetone-water, but strange solvent effects, acceleration the reaction rates, was found in the reaction with malachite green in water-methanol system.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.38-44
• /
• 2004

Searching for systems of self-assembled monolayers (SAMs) that can be used as templates for chemical lithography, we found that nitro groups on aromatic SAMs are selectively converted on Ag to amino groups by irradiation with a visible laser. 4-nitrobenzenethiol on Ag was thus converted to 4-aminobenzenethiol by irradiating it with an $Ar^+$ laser. This was evident from surface-enhanced Raman scattering (SERS) as well as from a coupling reaction forming amide bonds. The surface-induced photoreaction allowed us to prepare patterned binary monolayers on Ag that showed different chemical reactivities. Using the binary monolayers as a lithographic template, we induced site-specific chemical reactions, such as the selective growth of biominerals on either the nitro- or amine-terminated regions by adjusting the crystal-growth conditions. We also demonstrated that patterned, amine-terminated monolayers can be fabricated even on gold by using silver nanoparticles as photoreducing catalysts.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.211-217
• /
• 2008

A $ZrO_2$ coating solution containing $ZrO_2$ photo-catalysis, which is transparent in visible light, was prepared by the hydrolysis of alkoxide, and thin films on the $SiO_2$ glass substrate were formed in a dipcoating method. These thin films were heat-treated at temperatures ranging from $250^{\circ}C-800^{\circ}C$ and their characteristics were subjected to thermal analysis, XRD, spectrometry, SEM, EDS, contact angle measurement, and AFM. Tetragonal $ZrO_2$ phase was found in the thin film heat treated at $450^{\circ}C$, and anatase $TiO_2$ phase was detected in the thin film heat-treated at $600^{\circ}C$ and above. The thickness of the films was approximately 300 nm, and the roughness was 0.66 nm. Thus, the film properties are excellent. The films are super hydrophilic with a contact angle of $4.0^{\circ}$; moreover, they have self-cleaning effect due to the photo catalytic property of anatase $TiO_2$.

• Computers and Concrete
• /
• v.16 no.2
• /
• pp.261-274
• /
• 2015

This study established the standard recommended values and expansion fracture threshold values for the content of steel slag in controlled low-strength materials (CLSM) to ensure the appropriate use of steel slag aggregates and the prevention of abnormal expansion. The steel slags used in this study included basic oxygen furnace (BOF) slag and desulfurization slag (DS), which replaced 5-50% of natural river sand by weight in cement mixtures. The steel slag mortars were tested by high-temperature ($100^{\circ}C$) curing for 96 h and autoclave expansion. The results showed that the effects of the steel slag content varied based on the free lime (f-CaO) content. No more than 30% of the natural river sand should be replaced with steel slag to avoid fracture failure. The expansion fracture threshold value was 0.10%, above which there was a risk of potential failure. Based on the scanning electron microscopy (SEM) analysis, the high-temperature catalysis resulted in the immediate extrusion of peripheral hydration products from the calcium hydroxide crystals, leading to a local stress concentration and, eventually, deformation and cracking.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.657-663
• /
• 2011

Structure directing agent(SDA) containing piperidine moiety such as piperidine(PI), 2-methylpiperidine (MPI), 2,6-dimethylpiperidine(DMPI) and 2,2,6,6,-tetramethylpiperidine(TMPI), respectively has been utilized to synthesize aluminophosphate zeolite using hydrothermal method. The gel composition was $1.0Al_2O_3:1.0P_2O_5:0.76SDA:45H_2O$ and the hydrothermal heating was performed in an oven at 443 K and for 7 days at static mode. The obtained zeolitic material contained a lamellar structure when PI was used as the SDA. With a progressive increase of the SDA size, various structures of aluminophosphate including AlPO-5 of AFI structure were obtained. The aluminophosphate of SAS structure was formed when the largest TMPI was utilized as the SDA, which was confirmed by the Rietveld refinement. The result of $^{27}Al$ and $^{31}P$ MAS NMR of the sample suggested that Al and P were incorporated into the framework of the aluminophosphate.

• Environmental engineer
• /
• v.25 s.257
• /
• pp.56-60
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.667-668
• /
• 2002

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.130-131
• /
• 1997

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.63-65
• /
• 2001