• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2000

This work was done to investigate problems of cashew coating in a wooden-art industry such as ritual vessels and to improve a curing property of cashew film. The main problem in the cashew coating industry was a small-scale business, insufficiency of facilities, lack of knowledge about cashew resin and painting, and lack of a technology of productivity improvement by accelerated drying time of cashew film. In present, cashew coating for ritual vessels mostly used the petroleum as a thinner. The time of set to touch of cashew film thinning with petroleum on glass plates was increased with the increasement of the thinning proportion, but retarded from 3 to 11 times compared to that of an exclusive thinner according to thinning level. The addition of 20% aceton to petroleum contributed to the high reduction rate up to about 60% at the thinning level of 100%, which was effective to accelerate the drying time of cashew film. Even though only the petroleum or the petroleum-aceton(20%) mixture was used as a thinner, it did not exhibit any distinguishable differences in crack and appearance of cashew-film coated on Frexinus rhynchophylla after 5 cycles of soak under the vacuum-drying treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.30-37
• /
• 2006

The present study examined the formaldehyde (HCOH) emission characteristic of various wood-based panel used in interior design, and measured changes in formaldehyde emission when a number of VOC reduction methods were applied. Formaldehyde emission showed a clear tendency of increase with the rise of temperature, and the concentration of formaldehyde emitted changed according to the preprocessing condition before measuring. Formaldehyde emission from wood board after bake out treatment was lower than that of the control group. When specimens were coated with urethane, cashew, water, oil stain, they generally showed the decrease of formaldehyde emission, although varying according to finishing material, and when edge sealing was applied the decrease became significant. $TiO_2$ coating was more effective in decreasing formaldehyde under ultraviolet lamps than under ordinary lamps. When the irradiation of ultraviolet lamps gets longer, formaldehyde emission decreased.

• 보존과학연구
• /
• s.30
• /
• pp.171-187
• /
• 2009

The Seated iron Vairocana Buddha statue of Dopiansa Temple, Cheolwon was designated National treasure No. 63, it is very important to rearch about Korean Buddha statue because it has an inscription on the back indicates that it was made in 865 A.D., the fifth year of the reign of King Gyeongmun(861-875) of Unified Silla(668-935), through the devoted faith of some 1,500 Buddhist followers of the Cheorwon-gun area. In this conservation treatment, for the Seated iron Vairocana Buddha statue of Dopiansa Temple, Cheolwon plating layer and cashew paint layer of the iron pedestal were removed and for the paint the Body of the Buddha, fake metal layer and plaster layer were removed, stabilizing treatment and coating treatment were done, and removal and restoration of earlobe which had been damaged and later was restored with plaster in the regilding in 1988, and the white hair on forehead was replaced with material of rock crystal, and conch-shaped hair damaged was restored on 35 spots.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.15-22
• /
• 2005

The acoustic properties of various coatings for stringed musical instruments made were investigated. The applied coatings were urethane topcoat, oil stain, natural varnish, cashew and UV-curable epoxy coating. Acoustic properties of coatings inferred from a resonance frequency and a damping measured by FFT analyzer and tan ${\delta}$ measured by DMTA. Acoustic properties from resonance frequency and damping were analyzed. Optimum coating for stringed instruments was determined by viscoelastic properties and acoustic properties of coating.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.373-390
• /
• 2015

This study investigated the effect of coated feed using mixed oil on rumen fermentation characteristics. Two experiments were conducted based on materials that were mixed. First, cashew nut and soybean oils were mixed with white mineral oil. And second, different plant extracts were mixed with white mineral oil. At first experiment, inclusion levels of mixed oil on diet (0.03%, 0.1%, 0.5%) were applied as variables. A coated diet was fermented with rumen inoculum according to in vitro rumen fermentation and its parameters were investigated. In the result of first experiment, no negative effects on rumen pH were found. Significantly decreased dry matter digestibility was detected at 0.5% treatment (P<0.05). Total gas productions in control and 0.03% were significantly greater than those of others (P<0.05). Significantly reduced methane productions were found in all treatments compared to the control (P<0.05). Inclusion of mixed oil did not affect on ammonia production. Total volatile fatty acid production was also not influenced by coating with mixed oils. Rumen fermentation parameters were greatly changed according to introduced plant extracts at second experiment. The significantly lowest and greatest ammonia productions were found at treatments with Ixeris dentata and Plantago asiatica, respectively (P<0.05). The significantly greatest acetate and propionate productions were detected at treatments with Crucuma longa and Zizyphus vulgaris 1, respectively (P<0.05). All treatments, except Chrysanthemum idicum, Euyale ferox seed, Moringa leaf and fruit and Zizyphus vulgaris 1, showed significantly increased total volatile fatty acid production compared to the control (P<0.05). Only Paeonia lactiflora showed significantly lesser gas production than the control (P<0.05). In methane production, Ceramium, Zizyphus, Paeonia, Agrimonia, Torilis, Mugwort, Foeniculum, Euphorbia, Taraxacum, Artemisia, Momordica, Curcuma and Moringa reduced methane significantly compared to the control (P<0.05).