• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.813-823
• /
• 2023

In this study, microstructure, hardening layer hardness, and case depth were evaluated after induction hardening(IH) of base metal specimen(BM) treated with annealing and quenching-tempering specimen(QT) treated with quenching and tempering. The microstructure after IH was significantly influenced by the microstructure before IH and the induction coil heating movement speed, but the effect of the induction frequency was very small. The hardness of the hardened layer at an induction coil heating movement speed of 15 mm/s or less was more influenced by the microstructure before IH than the induction coil travel speed and induction frequency. The induction coil travel speed has the significantly effect on the case depth, the induction frequency has effect and the microstructure before IH has a small effect.

• 한국음향학회지
• /
• 제16권4호
• /
• pp.29-34
• /
• 1997

원거리에서 수동소나에 의한 탐지거리를 예측하기 위해서는 소나방정식이 이용된다. 본 연구에서는 거리와 깊이함수의 신호이득 및 탐지확률을 구한 후 이를 거리로 적분하여 거리의존 해양환경에서 탐지거리를 계산하는 탐지거리 예측모델을 개발하였다. 개발된 모델은 기존에 발표된 거리독립 해양환경에서의 결과와 비교하여 검증하였고, 이를 바탕으로 거리의존 해양환경에서 수동소나에 의한 표적탐지에 큰 영향을 주는 난수성 소용돌이 해양환경에 확장 적용하여 표적의 탐지거리를 예측하였으며, 그 결과에 대하여 소개한다.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1193-1205
• /
• 2018

A footing located on slopes possess relatively lower bearing capacity as compared to the footing located on the level ground. The bearing capacity further reduces under seismic loading. The adverse effect of slope inclination and seismic loading on bearing capacity can be minimized by proving sufficient setback distance. Though few earlier studies considered setback distance in their analysis, the range of considered setback distance was very narrow. No study has explored the critical setback distance. An attempt has been made in the present study to comprehensively investigate the effect of setback distance on footing under seismic loading conditions. The pseudo-static method has been incorporated to study the influence of seismic loading. The rate of decrease in seismic bearing capacity with slope inclination become more evident with the increase in embedment depth of footing and angle of shearing resistance of soil. The increase in bearing capacity with setback distance relative to level ground reduces with slope inclination, soil density, embedment depth of footing and seismic acceleration. The critical value of setback distance is found to increase with slope inclination, embedment depth of footing and density of soil. The critical setback distance in seismic case is found to be more than those observed in the static case. The failure mechanisms of footing under seismic loading is presented in detail. The statistical analysis was also performed to develop three equations to predict the critical setback distance, seismic bearing capacity factor ($N_{{\gamma}qs}$) and change in seismic bearing capacity (BCR) with slope geometry, footing depth and seismic loading.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권3호
• /
• pp.217-222
• /
• 2016

Dental treatment is often performed under general anesthesia or sedation when an intellectually disabled patient has a heightened fear of treatment or has difficulty cooperating. When it is impossible to control the patient due to the severity of intellectual disability, conscious sedation is not a viable option, and only deep sedation should be performed. Deep sedation is usually achieved by propofol infusion using the target controlled infusion (TCI) system, with deep sedation being achieved at a slightly lower concentration of propofol in disabled patients. In such cases, anesthesia depth monitoring using EEG, as with a Bispectral Index (BIS) monitor, can enable dental treatment under appropriate sedation depth. In the present case, we performed deep sedation for dental treatment on a 27-year-old female patient with mental retardation and severe dental phobia. During sedation, we used BIS and a newly developed Anesthetic Depth Monitor for Sedation (ADMS$^{TM}$), in addition to electrocardiography, pulse oximetry, blood pressure monitoring, and capnometry for patient safety. Oxygen was administered via nasal prong to prevent hypoxemia during sedation. The BIS and ADMS$^{TM}$ values were maintained at approximately 70, and dental treatment was successfully performed in approximately 30 min.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.125-130
• /
• 2001

A existing design method of PSC girder bridges, according to total service loads, stress required tendon force at a time. Because this design method increases beam depth, design of long span is difficult. However, As UC girder stressing at difficult loading stages reduces sectional depth of PSC girder, both design and operation of long span bridges is possible. so, this study analyzes the effect of design parameter (Girder Strength, Girder Spacing, Span Length, Joint Strength) on the beam depth of IPC girder continuous bridges, and shows sectional depth of UC girder for design of long span bridges. According to analysis, when a continuous bridges of same length span is at strength of joint over strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed and when a continuous bridges of different span length is at strength of joint below strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed. In two case, a change of beam depth is mostly observed over strength of girder of 350kg/$cm^{2}$ according to analysis of deflection data, a continuous bridges of IPC girder is nearly satisfied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.171-174
• /
• 2003

In this paper, we propose the method of stereo images composition using adaptive dense disparity estimation. For the correct composition of stereo image and 3D virtual object, we need correct marker position and depth information. The existing algorithms use position information of markers in stereo images for calculating depth of calibration object. But this depth information may be wrong in case of inaccurate marker tracking. Moreover in occlusion region, we can't know depth of 3D object, so we can't composite stereo images and 3D virtual object. In these reasons, the proposed algorithm uses adaptive dense disparity estimation for calculation of depth. The adaptive dense disparity estimation is the algorithm that use pixel-based disparity estimation and the search range is limited around calibration object.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1122-1124
• /
• 1996

Depth between the robot and the target is an essential information in the robot control. However, in case of eye-in-hand robot with one camera, it is not easy to get an accurate depth information in real-time. In this paper, the techniques of depth-from-motion and depth-from-focus are combined to accomplish the real-time requirement. Integration of the two approaches are accomplished by appropriate use of confidence factors which are evaluated by fuzzy rules. Also a fuzzy logic based calibration technique is proposed.

• 대한원격탐사학회지
• /
• 제29권6호
• /
• pp.601-610
• /
• 2013

As a standard water clarity variable, the vertical underwater visibility, called Secchi depth, is estimated with ocean color satellite data. In the present study, Moderate Resolvtion Imaging Spectradiometer (MODIS) data are used to measure the Secchi depth which is a useful indicator of ocean transparency for estimating the water quality and productivity. To estimate the Secchi depth $Z_v$, the empirical regression model is developed based on the satellite optical data and in-situ data. In the previous study, a semi-analytical algorithm for estimating $Z_v$ was developed and validated for Case 1 and 2 waters in both coastal and oceanic waters using extensive sets of satellite and in-situ data. The algorithm uses the vertical diffuse attenuation coefficient, $K_d$($m^{-1}$) and the beam attenuation coefficient, c($m^{-1}$) obtained from satellite ocean color data to estimate $Z_v$. In this study, the semi-analytical algorithm is validated using temporal MODIS data and in-situ data over the Yellow, Southern and East Seas including Case 1 and 2 waters. Using total 156 matching data, MODIS $Z_v$ data showed about 3.6m RMSE value and 1.7m bias value. The $Z_v$ values of the East Sea and Southern Sea showed higher RMSE than the Yellow Sea. Although the semi-analytical algorithm used the fixed coupling constant (= 6.0) transformed from Inherent Optical Properties (IOP) and Apparent Optical Properties (AOP) to Secchi depth, various coupling constants are needed for different sea types and water depth for the optimum estimation of $Z_v$.

• 한국수자원학회논문집
• /
• 제30권4호
• /
• pp.335-346
• /
• 1997

본 연구는 실제하천에서의 불규칙한 수위변화에 따라 교각주위에서 발생하는 세굴현상에 대하여 규명하는 것을 목적으로 하고 있다. 이를 위하여 IHP 대표유역인 금강수계내 보청천 최하류 지점에 설치되어 있는 산계교를 중심으로 최근 15년 동안에 발생된 6개 홍수사상에 대한 수위수문곡선을 선택하여 모형실험을 실시하였다. 모형수로는 실제하천과 모형수로에서의 조도계수 실측, 모형수로 경사변화에 따른 최대세굴심도의 변화, 실제하천과 모형내 하상재료의 침강속도와 마찰속도의 비를 검토하여 하상경사를 결정하고 실제하천에서의 세굴심도를 직접 측정하여 모형수로 실험결과와 비교함으로써 모형수로를 검증하였다. 실험 결과, 정류상태에서 모형실험을 실시하여 실제하천에 대한 최대세굴심을 예측할 경우에는 최고수위를 택하여 실시해야 하는 것으로 판단되며, 수위수문곡선 하강시 평형세굴심도는 최대세굴심보다 작으므로 실제하천에서 세굴심을 실측할 경우에는 되메우기에 의해 감소된 만큼의 세굴심을 고려해야 할 것으로 판단된다.

• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.75-83
• /
• 2004

본 연구는 경량형 옥상조경 소재로 도입가능성이 높은 자생식물을 중심으로 인공배합토에서 토심과 관수주기에 따른 식물의 생육반응을 검증함으로써 경량이면서 저관리형의 옥상조경을 실현하고 자생식물의 활용성을 높이고자 실시하였으며 그 결과는 다음과 같다. 1. 토심과 관수주기에 상관없이 생육이 양호하였던 수종은 애기기린초(Sedum middendorffianum Maxim)와 두메부추(Allium senescens L.)로 고사율 0%로 나타나 토심 5cm의 무관수의 조건에서도 생육이 가능한 저관리 경량형 옥상녹화에 적용 가능한 소재라 판단된다. 또한 두메부추는 토심 5cm에서 건물률이 높아 충실한 생장을 한 것으로 나타났으나 엽록소 측정을 통한 관상가치에서는 토심 10cm에서 양호한 것으로 나타나 관상가치를 고려한다면 토심 10cm 이상의 옥상녹화에 도입하는 것이 바람직한 것으로 판단된다. 2. 한라구절초(Chrysanthemum zawadskii Herb. Subsp. Coreanum (Nakai) Y. Lee Stat.)와 술패랭이(Diauthus superbus L. var. longicalycinus (Maxim) Williams)는 토심 5cm에서 고사율이 높았으며 생육이 저조하였다. 관수는 토심이 5cm인 경우 반드시 필요한 것으로 나타났으며 토심 10cm에서는 무관수에서도 양호한 생장을 하였다. 따라서 무관수의 저관리 경량형 옥상녹화를 조성하기 위해서는 최소 10cm 이상의 토심을 조성하여 식재하는 것이 바람직한 것으로 판단된다. 3. 목본류인 백리향(Thymus quinquecostatus Celak)은 토심 5cm에서 무관수이거나 3주간의 관수주기에서 90% 이상 고사하였으며 최소 1주간격으로 관수하였을 경우 생육상태가 양호하였다. 특히 토심 10cm에서는 무관수일 경우에도 생육이 우수한 것으로 나타났다. 따라서 토심 10cm에서 저관리 옥상녹화의 조성에 도입 가능한 수종으로 판단된다. 결론적으로, 본 연구에서 실험한 수종은 저관리 경량형 옥상녹화에 도입할 경우 최소 토심 10cm가 적정하며 5cm 이하의 토심에서는 최소 2주일에 1회 이상의 관수를 하는 것이 바람직한 것으로 나타났다. 특히 토심 5cm에서도 애기기린초(Sedium middendorffianum)나 두메부추(Allium senescens L.)와 같은 수종을 도입하였을 경우에는 초경량 저관리의 옥상녹화 조성이 가능한 것으로 나타났다. 본 연구는 자생초화류을 중심으로 토심과 관수와의 관계에 대한 기초적인 자료를 제시한데 그 의의가 있다고 하겠다. 이에 앞으로 다양한 토양과 수종에 대한 개발과 연구가 진행되어야 하며 특히 인공배지에서의 적정시비량과 저토심에서의 목본류에 대한 실험과 연구가 이루어져야 할 것이다.