• 대한관절경학회:학술대회논문집
• /
• 대한관절경학회 2007년도 제17차 추계학술대회 심포지움
• /
• pp.66-74
• /
• 2007

1931년 Burman은 주관절의 제한된 관절 공간, 관절낭 팽창의 어려움, 삽입구 주변에 근접한 신경-혈관 구조물에 의해 주관절 관절경은 불가능하다고 보고하였다. 비록 1935년 자신이 다시 여러 번 시도 끝에 주관절 전방 관절낭을 관절경으로 관찰한 후 주관절도 관절경적 접근이 가능하다는 점을 처음으로 언급하였지만 1980년대 중반까지도 몇몇의 보고를 제외하고 주관절 관절경에 대한 관심은 매우 적었다. 그 후 주관절 관절경은 관절경 기구들의 발달과 소관절을 위한 소구경 관절경의 발전과 함께 하였다. 1985 Andrew와 Carson이 supine position에서 전외측, 전내측 그리고 후외측 삽입구를 이용하여 주관절을 관찰하였으며 1989년 Poehling은 후방 주관절 접근이 용이하도록 prone position으로 관절경을 시행하였고 최근 새로운 접근 방법 및 확대된 적응증에 대한 보고가 점점 늘어나고 있다. 주관절 관절경의 합병증은 적지만 주관절 주변의 해부학적 구조물에 대한 정확한 이해를 가지고 있어야 심각한 합병증을 발생을 예방할 수 있다.

• Korea-Australia Rheology Journal
• /
• 제14권1호
• /
• pp.25-32
• /
• 2002

We report the first steps of a collaborative project between the University of Queensland, Polyflow, Michelin, SK Chemicals, and RMIT University, on simulation, validation and application of a recently introduced constitutive model designed to describe branched polymers. Whereas much progress has been made on predicting the complex flow behaviour of many - in particular linear - polymers, it sometimes appears difficult to predict simultaneously shear thinning and extensional strain hardening behaviour using traditional constitutive models. Recently a new viscoelastic model based on molecular topology, was proposed by McLeish and carson (1998). We explore the predictive power of a differential multi-mode version of the porn-pom model for the flow behaviour of two commercial polymer melts: a (long-chain branched) low-density polyethylene (LDPE) and a (linear) high-density polyethylene (HDPE). The model responses are compared to elongational recovery experiments published by Langouche and Debbaut (19c99), and start-up of simple shear flow, stress relaxation after simple and reverse step strain experiments carried out in our laboratory.

• 한국어병학회지
• /
• 제16권3호
• /
• pp.161-164
• /
• 2003

An Infectious hematopoietic necrosis virus strain (IHNV-RTK) was isolated from cultured rainbow trout at Kumi and Jechun area in Korea during 2000 and 2001. In the RT-PCR amplification with the specific primer set designed from IHNV G protein region, a 540 bp PCR product was amplified from the RTK strain. The RTK strain showed higher sequence homology with the published IHNV G protein genes (RB-76, LR-73, Col-85, and Carson-89)

• Computers and Concrete
• /
• 제5권4호
• /
• pp.295-328
• /
• 2008

A previously published multiscale model for early-age cement-based materials [Pichler, et al.2007. "A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials." Engineering Fracture Mechanics, 74, 34-58] is extended towards upscaling of viscoelastic properties. The obtained model links macroscopic behavior, i.e., creep compliance of concrete samples, to the composition of concrete at finer scales and the (supposedly) intrinsic material properties of distinct phases at these scales. Whereas finer-scale composition (and its history) is accessible through recently developed hydration models for the main clinker phases in ordinary Portland cement (OPC), viscous properties of the creep active constituent at finer scales, i.e., calcium-silicate-hydrates (CSH) are identified from macroscopic creep tests using the proposed multiscale model. The proposed multiscale model is assessed by different concrete creep tests reported in the open literature. Moreover, the model prediction is compared to a commonly used macroscopic creep model, the so-called B3 model.

• Structural Engineering and Mechanics
• /
• 제10권3호
• /
• pp.277-288
• /
• 2000

The present paper, deals with the dynamic analysis of a thin-walled tower with varying cross-section and additional masses. It, especially, deals with the effect of the rotary inertia of those masses, which have been neglected up to now. Using Galerkin's method, we can find the spectrum of the eigenfrequencies and, also, the shape functions. Finally, we can solve the equations of the problem of the forced vibrations, by using Carson-Laplace's transformation. Applying this method on a tall mast with 2 concentrated masses, we can examine the effect of the rotary inertia and the diaphragmatic operation of the above masses, on the 3 first eigenfrequencies.

• Structural Engineering and Mechanics
• /
• 제9권1호
• /
• pp.51-68
• /
• 2000

The paper presents theoretical and experimental investigations on three varying thickness circular cylinders, which were tested to destruction under external hydrostatic pressure. The five buckling theories that were presented were based on inelastic shell instability. Three of these inelastic buckling theories adopted the finite element method and the other two theories were based on a modified version of the much simpler von Mises theory. Comparison between experiment and theory showed that one of the inelastic buckling theories that was based on the von Mises buckling pressure gave very good results while the two finite element solutions, obtained by dividing the theoretical elastic instability pressures by experimentally determined plastic knockdown factors gave poor results. The third finite element solution which was based on material and geometrical non-linearity gave excellent results. Electrical resistance strain gauges were used to monitor the collapse mechanisms and these revealed that collapse occurred in the regions of the highest values of hoop stress, where considerable deformation took place.

• Applied Microscopy
• /
• 제51권
• /
• pp.12.1-12.12
• /
• 2021

Intravital video microscopy permits the observation of microcirculatory blood flow. This often requires fluorescent probes to visualize structures and dynamic processes that cannot be observed with conventional bright-field microscopy. Conventional light microscopes do not allow for simultaneous bright-field and fluorescent imaging. Moreover, in conventional microscopes, only one type of fluorescent label can be observed. This study introduces multispectral intravital video microscopy, which combines bright-field and fluorescence microscopy in a standard light microscope. The technique enables simultaneous real-time observation of fluorescently-labeled structures in relation to their direct physical surroundings. The advancement provides context for the orientation, movement, and function of labeled structures in the microcirculation.

• Steel and Composite Structures
• /
• 제48권3호
• /
• pp.293-303
• /
• 2023

In this paper, geometrically nonlinear free vibration analysis of Mindlin viscoelastic plates with various geometrical and material properties is studied based on the Von-Karman assumptions. A novel solution is proposed in which the nonlinear frequencies of time-dependent plates are predicted according to the nonlinear frequencies of plates not dependent on time. This method greatly reduces the cost of calculations. The viscoelastic properties obey the Boltzmann integral law with constant bulk modulus. The SHPC meshfree method is employed for spatial discretization. The Laplace transformation is used to convert equations from the time domain to the Laplace domain and vice versa. Solving the nonlinear complex eigenvalue problem in the Laplace-Carson domain numerically, the nonlinear frequencies, the nonlinear viscous damping frequencies, and the nonlinear damping ratios are verified and calculated for rectangular, skew, trapezoidal and circular plates with different boundary conditions and different material properties.

• 대한전자공학회논문지TC
• /
• 제47권5호
• /
• pp.60-68
• /
• 2010

통신서비스에 장애를 유발하는 전력선에 의한 전자유도 현상에 대한 방호를 위하여는 유도전압을 평가하여야 하고 상응한 대책을 수행하여야 한다. 유도전압을 평가하는 방식은 ITU 규격과 일본 유도자료로부터 국내에 도입되어 법률 고시화되어 있는데 이것으로 수용되지 못하는 유도 커플링상의 제원 요소들이 있다. 본 논문에서는 계산 수행 적용이 곤란한 범위를 포괄할 수 있도록 좀더 일반화된 고전적 유도 및 전자파 원론 해석 근간의 전자계 형성에 의한 소스와 관측점의 유도전압 산출 방식에 대한 기술을 분석하여 제시하였다.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1465-1469
• /
• 2013

The resent developed high speed train called HEMU-430X (Highspeed Electric Multiple Unit - 430km/h eXperiment) recorded a 421.4 km/h in Kyoungbu high speed line in Korea. A verity of measurement systems are used to check the performance between pantograph and catenary system. An innovative measurement system is adopted to check the current of catenary wire in the track side during HEMU-430X test running. This paper presents the measurement results of catenary current in kyoungbu high-speed line and describe its utilizing technology in the experimental results of catenary current. In order to analyze field testing results, the current ratio between contact and catenary current have been analyzed by means of Carson-Pollaczek equation. And the current wave forms between catenary and contact wire are presented based on the simulation results.