• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.4
• /
• pp.147-151
• /
• 2007

Load testing is an effective means in calculating the rating value of bridge. In Korea, load carrying capacity of bridge is modified by response modification factor that is determined from comparisons of measured values and analysis results. This paper presents the development of a method for determining the response modification factor, using traffic load. The proposed method is based on the results of computer simulations of traffic action effects. A comparison between the proposed method and the present method shows good agreement in estimating the modified load carrying capacity of bridges.

• Computers and Concrete
• /
• v.6 no.6
• /
• pp.473-490
• /
• 2009

This paper presents a new methodology to evaluate the load carrying capacity of deteriorated non-slender concrete bridge pier columns by construction of the full P-M interaction diagrams. The proposed method incorporates the actual material properties of deteriorated columns, and accounts for amount of corrosion and exposed corroded bar length, concrete loss, loss of concrete confinement and strength due to stirrup deterioration, bond failure, and type of stresses in the corroded reinforcement. The developed structural model and the damaged material models are integrated in a spreadsheet for evaluating the load carrying capacity for different deterioration stages and/or corrosion amounts. Available experimental and analytical data for the effects of corrosion on short columns subject to axial loads combined with moments (eccentricity induced) are used to verify the accuracy of proposed model. It was observed that, for the limited available experimental data, the proposed model is conservative and is capable of predicting the load carrying capacity of deteriorated reinforced concrete columns with reasonable accuracy. The proposed analytical method will improve the understanding of effects of deterioration on structural members, and allow engineers to qualitatively assess load carrying capacity of deteriorated reinforced concrete bridge pier columns.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.669-675
• /
• 2003

To increase fishery resources in coastal waters, juvenile fish and bivalves are artificially released every year in Korea. This study provides a methodology to estimate an optimal release quantity based on the carrying capacity of the receiving basins. Carrying capacity was defined by E.p. Odum's theory of ecosystem development as the upper limit of biomass, where total system respiration equals total primary production. The Ecopath trophic ecological model was used to determine carrying capacity in the surfzone ecosystem of Bangjukpo on the southern coast of Korea. Using a top-down control method, various biomasses of fish groups were given to the simulation, with primary production constant and no catch. The results showed that biomass of selected fish groups increased by two orders of magnitude, yielding a five-fold increase in overall consumer biomass. The resultant values are 10 times higher than those estimated in open seas. This can be explained by higher primary production in the Bangjukpo surfzone ecosystem. This method can be used for strategic releases and ecosystem management, particularly when based on an ecological background.

• Steel and Composite Structures
• /
• v.45 no.5
• /
• pp.715-728
• /
• 2022

Closed steel supports of different shapes are used in mining and underground constructions. The supports are prefabricated from rolled, usually robust, steel profiles. The load carrying capacity of a support is considerably influenced by the active loading and passive forces. The passive forces are induced by interactions between the support and the surrounding rock mass. The analysis herein comprises three parts: The first part consists of structural geometry processing. The second part involves finding the numerical solution of a statically indeterminate structure for a specified load. The third part is calculation of the load carrying capacity and the components of internal forces and deformations. For this, the force method and numerical integration are used. The Winkler model is applied when the support interacts with the surrounding environment. The load carrying capacity is limited by the slip resistance of the connected parts and it is limited by reaching the ultimate state of the profile. This paper serves as a comprehensive reference for the determination of the load carrying capacity of closed steel supports and includes stepwise derivations of the governing formulas.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.3
• /
• pp.49-55
• /
• 2014

Purpose : The purpose of this study was to investigate the effect of cross bag weight and carrying bag position type on vastus medialis oblique and vastus lateralis muscle activity ratio during step up. Method : Twenty healthy subjects participated in this study. subjects randomized performed step up with bag weight less than 15%, more than 15% of totalbody weight and without bag and carrying bag position ipsilateral and contralateral. muscle activity was measured with surface electromyography. One-way analysis of variance with repeated measures was used with a significance level of 0.05 Result : The results of this study were as follows: 1. The muscle activity ratio decreased significantly ipsilateral bag position more than 15% of body weight(p<.05). Also, the muscle activity ratio increased significantly contra lateral bag position more than 15% of body weight(p<.05). Conclusion : In conclusion, it was found that applied carrying bag position with weight on VMO,VL muscle activity ratio during step up down. Therefore carrying bag position can be used to selective activate vastus medialis oblique muscle in subjects with patellofemoral pain syndrome.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.61-68
• /
• 2009

Purpose: The purpose of this study was to analyze the changes of the relative impulse of the foot when carrying 5 types of schoolbag during level walking. Methods: Forty-four normal subjects were divided into 5 groups according to the method of carrying a bag: carrying no bag (condition 1), a backpack (condition 2), a shoulder bag (condition 3), a cross bag (condition 4) and a one-hand bag (condition 5). To evaluate the partial relative impulse, 7 areas were measured on the sole of a foot: the hallux, toe, 1st metatarsal head (Met1) and the 2nd & 3rd metatarsal heads (Met2/3), the 4th & 5th metatarsal heads (Met4/5), mid foot and heel. Repeated one-way analysis of variance (ANOVA) and independent t-tests were used to analyze the statistical data. Results: In the right foot, the relative impulses in every areas revealed no significant difference (p>0.05), however, the relative impulses at Met1, Met2/3, Met4/5 and heel were significantly different between the different conditions (p<0.05). There were significant differences on comparing the relative impulse between left and right foot within one condition, the mid foot in condition 2, as well as the hallux and Met1 in condition 3 (p<0.05). In condition 4, the toe, Met1, Met4/5 and mid foot were significantly different (p<0.05). The values at the hallux, toe and Met1 in condition 5 also were significantly different (p<0.05). Conclusion: These findings showed that the symmetrical relative impulse of the foot was present in the case of carrying a backpack, but there was an extra load on specific regions and asymmetrical relative impulses in the case of carrying a shoulder bag, a across bag and a one-hand bag. (ED note: this abstract is not clear. You need to work on it.)

• Physical Therapy Rehabilitation Science
• /
• v.12 no.2
• /
• pp.155-160
• /
• 2023

Objective: The purpose of this study is to confirm a comparison of bag weight and applied location change on plantar pressure and gait parameters (stride time, stride length, cadence) of the 20s students. Design: One group cross-sectional design Methods: The subjects were measured in each condition. Each condition was no carrying a bag, carrying a 3kg bag, and a 6kg bag on the right shoulder, and walked on the gait analyzer. After the location of the bag was changed, measured when a 3kg backpack and a 6kg backpack was each carried on the back while walking. Results: There was a statistically significant difference in plantar pressure according to bag weight when carried on the right shoulder (p<0.05). As a result of the post-hoc analysis, carrying a 6kg bag was a significant difference between no carrying a bag and carrying a 3kg bag (p<0.05). There was no statistically significant difference in changes in stride time, stride length, and cadence. There was no statistically significant difference in plantar pressure and gait parameters according to backpack weight. Conclusions: As a result of this study, it is thought that it will be possible to present a method for the application of the correct bag on location and weight in 20s students, and to prevent and reduce muscle musculoskeletal system diseases caused by incorrect bag wearing.

• Structural Engineering and Mechanics
• /
• v.63 no.4
• /
• pp.551-565
• /
• 2017

In this paper, an analytical approach is proposed for determining vibration characteristics of cracked non-uniform continuous Timoshenko beam carrying an arbitrary number of spring-mass systems. This method is based on the Timoshenko beam theory, transfer matrix method and numerical assembly method to obtain natural frequencies and mode shapes. Firstly, the beam is considered to be divided into several segments by spring-mass systems and support points, and four undetermined coefficients of vibration modal function are contained in each sub-segment. The undetermined coefficient matrices at spring-mass systems and pinned supports are obtained by using equilibrium and continuity conditions. Then, the overall matrix of undetermined coefficients for the whole vibration system is obtained by the numerical assembly technique. The natural frequencies and mode shapes of a cracked non-uniform continuous Timoshenko beam carrying an arbitrary number of spring-mass systems are obtained from the overall matrix combined with half-interval method and Runge-Kutta method. Finally, two numerical examples are used to verify the validity and reliability of this method, and the effects of cracks on the transverse vibration mode shapes and the rotational mode shapes are compared. The influences of the crack location, depth, position of spring-mass system and other parameters on natural frequencies of non-uniform continuous Timoshenko beam are discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.434-444
• /
• 2006

The stone column method is widely used in Europe as an alternative to conventional pile foundations. Several benefits of using the stone column method include sound performance, low cost, expediency of construction, and liquiefaction resistance, among others. Recently, geosynthetic-encased stone column approach has been developed to improve its' load carrying capacity through increasing confinement effect. Although such a concept has successfully applied in practice, fundamentals of the method have not been fully explored. This Paper Presents the results of an investigation on the loading carriying capacity of geogrid-encased stone column using a series of 2D finite element analyses. The results of the analyses indicated improved short- and long-term carrying capacity of the geogrid-encased stone column method over the conventional strone column method with no encasing.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.813-821
• /
• 1995

본 연구의 목적은 심리육체적 방법(Psychophysical method)을 이용하여 다양한 중량물운반 유형에서의 최대허용하중을 구하는 것이며 이의 타당성을 생리학적 방법(physiological method)을 이용하여 검토하는 것이다. 또한, 인체측정과 근력측정 자료를 이용하여 각 운반유형에서의 최대허용 하중을 예측하는 모형을 개발하고자 한다. 본 연구에서는 네 가지의 운반유형(Front carrying, One-hand side carrying, Two-hands side carrying 그리고 Back carrying)과 두가지의 보행 속도 (50.0 그리고 79.2 m/min)를 주요변수로 8가지의 작업에 대해 무작위로 선택하여 각 작업에 대한 최대허용 하중을 시간과 경비의 감소측면에서 폭넓게 사용되고 있는 심리육체적 방법으로 구하였다. 피실험자는 운반작업의 경력이 있는 실제 작업자군(n=7)과 그렇지 않은 학생군(n=10)으로 구분하여 건강한 남성 피실험자를 대상으로 연구를 실시하였다. 주실험전에 인체측정과 근력측정을 실시하였다. 이후에 심리육체적 방법과 생리학적 방법을 실시간(on-line)으로 실시하였다. 연구결과로 학생군과 작업자군간의 신체조건은 뚜렷한 차이를 보이지 않았으나 근력은 작업자가 우월하였다. 심리육체적 방법을 사용하여 도출된 최대허용 하중은 학생군, 작업자군 모두 운반유형의 변화에 따라 유의함을 보였다.(학생군:p=.0001 작업자군:p=.0001). 반면에 속도의 변화는 유의하지 않았다(학생군:p=.7954 작업자군:p=.9231). 또한 학생군과 작업자군 모두 Back carrying에서 가증 큰 하중을 운반하였다(학생군:8.16kg 작업자군:12.9kg). 심박수를 이용한 생리학적 연구에서는 평균 심박수가 거의 100 이하를 유지하므로써 피실험자들이 8시간 작업기준으로 보아 무리가 없는 최대허용 하중을 결정하였음을 보였다. 또한 각 운반작업에 대한 최대허용 하중을 예측하는 회귀모형을 제시하였다.