• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.185-191
• /
• 1992

In this paper, it is attempted to distinguish the charged particles and to judge the polarity by the use of Thermally Stimulated Current(TSC) and Temperature Gradient Thermally Stimulated Surface Potential Measurement(TG-TSSP)with experimental insulation material XLPE-EVA for power cables which is made by blending cross-linked polyethylene(XLPE) and ethylene-vinylacetate copolymer(EVA). In addition, it is performed to investigate the effect of EVA blending. From the experimental results, it is known that for the case of XLPE-EVA blended experimental material, the generation of space charged electric field is not obtained in the high temperature region due to the obatruction of the injection of trapping carrier by the electron and the positive hole.

• 한국조명전기설비학회지:조명전기설비
• /
• 제6권6호
• /
• pp.23-31
• /
• 1992

Charged particle in the polymers is supposed to affect the electrical conduction and to lead them th dielectrical breakdown finally. So we measured the space charge distribution made by application of high electric field and evaluated the polarity of the charged particle affected on electrical conduction and space charge formed in the insulating materials by using temperature gradient thermally stimulated current measurement method(TG-TSC measurement). As a result, in the cross-linked polyethylene, A-peak was caused from dipole polarization, C-peak was caused from ionic space charge polarization and D-peak was injected trap hole. Also we found it crossible the evaluated the polarity of injected trap carrier and electron(or hole) of carrier trap in the cross-lined polyethylene. We found that ${\gamma}$-ray irradiated low density polyethylene had a relation to the electronic trap and we also could get the value of electric field distribution in the samples of which evaluation was available.

• 대한전자공학회논문지TC
• /
• 제38권4호
• /
• pp.11-17
• /
• 2001

본 논문에서는 High-Order QAM(Quandrature Amplitude Modulation)을 적용하는 모뎀에서 강인하고 넓은 범위의 주파수 포착 범위를 가지는 극성판단(Polarity Decision) 반송파 동기용 PD(Phase Detector) 알고리즘을 제안하고 이에 대한 평균 출력특성(S-curve)과 분산특성을 수학적으로 유도하여 기존의 DD(Decision Directed)방식과 비교 분석한다. 기존의 DD 방식의 선형영역은 256 QAM의 경우 $3.5^{\circ}{\sim}3.5^{\circ}$ 이었으나 제안한 알고리즘의 선형영역은 ${\gamma}-17.9$에서 $36^{\circ}{\sim}36^{\circ}$ 의 넓은 구간을 가진다. 또한 기존의 DD 방식에서는 256 QAM의 주파수 오프셋 포착 성능이 ${\pm}10\;KHz$ 이하였다. 이는 아날로그 front-end 회로에서 주파수 오프셋이 일반적으로 ${\pm}100\;KHz$ 정도까지 줄어들 수 잇는 것을 감안하면 AFC(Automatic Frequency Control) 또는 반송파 복구를 위한 보조적인 위상검출회로가 필요하게 됨을 의미한다. 그러나 제안된 극성판단 반송파 동기 알고리즘을 사용하면 보조적인 회로의 도움없이 SNR = 30 dB에서 최대 ${\pm}300\;KHz$의 주파수 오프셋까지도 포착 가능하다.

• 대한전자공학회논문지
• /
• 제15권2호
• /
• pp.19-21
• /
• 1978

Cholesteryl Benzoate 액정에서 전류 수송기구를 규명하기 위하여 charge carrier의 어i도 mobilits를 극성 반전법을 사용하여 140∼185℃의 온도 영 역에서 측정했다. charge carrier의 drift mobilits는 주위온도가 증가함에 따라 2.5×10-7㎠/V.sec에서 2.0×10-6㎠/V.sec까지 증가했다. 이 실험결과로 부터 전류 수송기구는 ionic기구로 설명할 수 있다.

• 대한전기학회논문지
• /
• 제34권4호
• /
• pp.144-152
• /
• 1985

This paper temperature gradient thermally stimulated surface potentian (TG-TSSP) in measurements are applied to the study of the polarity of trapped and ionic carriers in cross-linked polyethylene (XLPE) filsm. In the thermally stimulated current in uniform temperature (TSC) of XLPE five peaks appear as indicated of the A B C D and E. In this paper A (at about -120$^{\circ}C$) D (at about 70$^{\circ}C$) and E (at about 110$^{\circ}C$) peaks are investigated. A peak is due to the biassing voltage and biassing temperature. Appear in to the glass transition temperature territory and caused in to the polarization of dipole. D peak is due to the depolarization of ionic space charge and E peak due to the detrapping of carriers injected from the electrodes. TG-TSSP and TSSP are measured to study the polarity of ionic carrier (D peak). In the unsatureated region of ionic space charge polarization, TG-TSSP is lower than TSSP during the initial stage of heating. Result of the experiment for E peak, TG-TSSP is higher than TSSP during the initial stage of heating and these results do not depend on the polarity of biassing voltage, and E peak is concerned with positive carriers (Holes).

• 한국재료학회지
• /
• 제11권7호
• /
• pp.599-602
• /
• 2001

전도성 고분자인 poupyrrole과 polyaniline을 이용하여 센서를 제조하고 휘발성 유기화합물에 대한감응특성 및 감지막의 물성을 조사하여 지금까지 알려지지 않은 감응 기구를 설명하고자 하였다. Polypyrrole과 polyaniline은 두께가 얇은 경우가 두꺼운 경우보다 감도가 높았으며, 1분간 도펀트를 제거한 센서가 가장 높은 감도를 나타내었다. 또한 두 가지 센서 모두 극성이 강한 분자가 흡착될수록 감도가 증가하였는데, 이는 극성을 갖는 분자가 감지막 내부로 침투하여 polaron 및 자유 carrier를 고착시키거나 추가의 자유 carrier를 형성하여 전도도에 변화를 주기 때문인 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.259-259
• /
• 2010

Periodically polarity inverted (PPI) ZnO structures on (0001) Al2O3 substrates are demonstrated by plasmas assisted molecular beam epitaxy. The patterning and re-growth methods are used to realize the PPI ZnO by employing the polarity controlling method. For the in-situ polarity controlling of ZnO films, Cr-compound buffer layers are used.[1, 2] The region with the CrN intermediate layer and the region with the Cr2O3 and Al2O3 substrate were used to grow the Zn- and O-polar ZnO films, respectively. The growth behaviors with anisotropic properties of PPI ZnO heterostructures are investigated. The periodical polarity inversion is evaluated by contrast images of piezo-response microscopy. Structural and optical interface properties of PPI ZnO are investigated by the transmission electron microcopy (TEM) and micro photoluminescence ($\mu$-PL). The inversion domain boundaries (IDBs) between the Zn and the O-polar ZnO regions were clearly observed by TEM. Moreover, the investigation of spatially resolved local photoluminescence characteristics of PPI ZnO revealed stronger excitonic emission at the interfacial region with the IDBs compared to the Zn-polar or the O-polar ZnO region. The possible mechanisms will be discussed with the consideration of the atomic configuration, carrier life time, and geometrical effects. The successful realization of PPI structures with nanometer scale period indicates the possibility for the application to the photonic band-gap structures or waveguide fabrication. The details of application and results will be discussed.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1515-1527
• /
• 2018

This paper presents a sensorless speed control of IPMSM (Interior Permanent Magnet Synchronous Motor) using the high-frequency (HF) square wave injection method. In the proposed HF pulsating square wave injection method, injection voltage is applied into the estimated d-axis of rotor and high-frequency induced q-axis current is considered to estimate the rotor position. Conventional square wave injection methods may need complex demodulation process to find rotor position, while in the proposed method, an easy demodulation process based on the rising-falling edge of the injected voltage and carrier induced q-axis current is implemented, which needs less processing time and improves control bandwidth. Unlike some saliency-based sensorless methods, the proposed method uses maximum torque per ampere (MTPA) strategy, instead of zero d-axis command current strategy, to improve control performance. Furthermore, this paper directly uses resultant d-axis current to detect the magnet polarity and eliminates the need to add an extra pulse injection for magnet polarity detection. As experimental results show, the proposed method can quickly find initial rotor position and MTPA strategy helps to improve the control performance. The effectiveness of the proposed method and all theoretical concepts are verified by mathematical equations, simulation, and experimental tests.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.127-127
• /
• 2010

Owing to many advantages on indirect intersubband absorption from the hole miniband to the electron miniband based on the type-II band alignment in InAs/GaSb strained-layer superlattice (SLS), InAs/GaSb SLS infrared photodetector (SLIP) has emerged as a promising system to realize high-detectivity quantum photodetector operating up to room temperature in the spectral range of mid-infrared (MIR) to far-infrared (FIR). In particular, n-barrier-n (n-B-n) structure designed for blocking the majority-carrier dark current makes it possible for MIR/FIR dual-band SLIP whose photoresponse (PR) band can be exclusively selected by the bias polarity. In this study, we present the MIR and FIR photoresponse (PR) mechanism identified by dual-band PR spectra and photoluminescence (PL) profiles taken from InAs/GaSb SLIP. In the MIR/FIR PR spectra measured by changing bias polarity, each spectrum individually shows a series of distinctive peaks related to the transitions from the hole subbands to the conduction one. The PR mechanism at each polarity is discussed in terms of diffusion current, and a superposition of MIR-PR in the FIR-PR spectrum is explained by tunnelling of electrons activated in MIR-SLS. The effective FIR-PR spectrum decomposed into three curves for HH1, LH1, and HH2 has revealed the edge energies of 120, 170, and 220 meV, respectively, and the temperature variation of the MIR-PR edge energies shows that the temperature behavior of the SLS systems can be approximately expressed by the Varshni empirical equation.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.375-387
• /
• 2015

This study investigates an economic and highly efficient power-converter topology and its modulation scheme for 60 kW rapid EV charger system. The target system is a three-phase three-switch buck-type rectifier topology. A new carrier-based PWM scheme, which is characterized by simple implementation using logic gates, is introduced in this paper. This PWM scheme replaces the diode rectifier equivalent switching state with an active switching state to produce the same effective current flowing path. As a result, the distortion of input current during the polarity reversal of capacitor line voltage can be mitigated. The proposed modulation technique is confirmed through simulation verification. The proposed modulation technique and its implementation scheme can expand the operation range of the three-phase three-switch buck-type rectifier with high-quality AC input and capacitor ripple current.