• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.271-298
• /
• 2012

Researchers have made significant progress in recent years towards realizing effective structural health monitoring (SHM) utilizing wireless smart sensor networks (WSSNs). These efforts have focused on improving the performance and robustness of such networks to achieve high quality data acquisition and distributed, in-network processing. One of the primary challenges still facing the use of smart sensors for long-term monitoring deployments is their limited power resources. Periodically accessing the sensor nodes to change batteries is not feasible or economical in many deployment cases. While energy harvesting techniques show promise for prolonging unattended network life, low power design and operation are still critically important. This research presents the WiSeMote: a new, fully integrated ultra-low power wireless smart sensor node and a flexible base station, both designed for long-term SHM deployments. The power consumption of the sensor nodes and base station has been minimized through careful hardware selection and the implementation of power-aware network software, without sacrificing flexibility and functionality.

• Clinics in Shoulder and Elbow
• /
• v.21 no.3
• /
• pp.169-175
• /
• 2018

Traumatic anterior dislocation of the shoulder is one of the most common directions of instability following a traumatic event. Although the incidence of shoulder dislocation is similar between young and elderly patients, most studies have traditionally focused on young patients due to relatively high rates of recurrent dislocations in this population. However, shoulder dislocations in older patients also require careful evaluation and treatment selection because they can lead to persistent pain and disability due to rotator cuff tears and nerve injuries. This article provides an overview of the nature and pathology of acute primary anterior shoulder dislocation, widely accepted management modalities, and differences in treatment for young and elderly patients.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.19-24
• /
• 1997

The weld line location and the weld line movement in stamping with laser-tailor welded blanks(TWB) were investigated through square cup deep drawing tests. The step blank holder was introduced to form TWB of different thicknesses without wrinkling, and the non-uniform blank holding force(BHF) was enforced to control weld line movement. Test results of the blanks with shifted weld lines showed that the large portion of the thinner area could result in a large weld line movement. Careful selection of the weld line location and the BHF control should be adapted in TWB design to avoid failures and to ensure its formability.

• The Journal of the Korean dental association
• /
• v.47 no.4
• /
• pp.184-190
• /
• 2009

OBJECTIVE The purpose of clinical study was to evaluate the survival of dental implants used in restoring patients with implant supported removable partial dentures (ISRPDs) of different configurations. MATERIALS AND METHODS The sample consisted of 20 consecutively treated partially edentulous patients, who, between 2003 and 2008, had a total of 84implants placed in different arch sites and who were treated with ISRPDs. The mean age was 57 years. Mean follow up time from delivery of ISRPDs was 3 years 2 months (range, 1 to 6 years). Osseointegration failure, postoperative complication of dental prosthesis, and the success rate of ISRPDs were retrospectively evaluated using clinical and radiographic examination. RESULT The overall implant survival rate was 100%. During follow up, the one clasp of removable partial denture was broken in 1 year11 months after prosthesis delivery. All patients were satisfied with their prosthesis. CONCLUSIONS Implant supported removable partial dentures could serve as favorable prognosis. Careful patient selection, with an appropriate maintenance and recall system, is recommended to obtain satisfactory results.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.236-245
• /
• 2003

Environment friendly architecture, which will reduce shortcomings of current architectural culture, can be achieved by using natural energy and environment friendly building materials together with their environmental architecture techniques. Particularly, even though the overall building system is perfect, it cannot be considered as comfortable architectural space if the materials are polluted, harmful to human bodies and producing wastes. Therefore, in order to build environment friendly architecture, the selection of the materials is very important and necessary from the planning stage with careful reviews and concern. This study tries to define what the environment friendly materials we, to investigate and to classify them, in order to provide some guidelines for selecting them at plans to build. For examples, the materials can be classified into natural materials, continuously usable materials, recycled materials from wastes, and less polluting materials mixed with natural materials. Finally, this study reviews the existing products in the market and proposes to develop new ones in the future. It will present the circulation of resources in the 21century through recycled and reused materials.

• Journal of Yeungnam Medical Science
• /
• v.21 no.1
• /
• pp.127-131
• /
• 2004

A laryngeal mask airway (LMA) has many advantages in the management of airway emergencies or the treatment of patients in whom intubation is difficult, but the use of LMA during positive ventilation may seem inappropriate to protect the airway because of the risk of pulmonary aspiration of regurgitated gastric contents. We experienced aspiration pneumonia after general anesthesia using LMA in patient who suffered from panperitonitis. It is considered that the main reason for aspiration pneumonia was a leakage of gastric content through the space surrounding the nasogastric tube while under high airway inflation pressure. We concluded that when LMA or the Proseal laryngeal mask airway (PLMA) is chosen for the use in difficult intubations, careful patient-suitability selection and the correct knowledge of LMA and PLMA are needed to protect the airway against aspiration.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.19 no.1
• /
• pp.16-20
• /
• 2008

Excising part or all part of a larynx as a cancer operation results in changes that transgress anatomic, physiologic, psychologic, and social priciples. The quality of life of a patient's life after any given cancer surgery usually is regarded as a second-priority consideration after oncologic safety. With laryngeal surgery, excision of malignant disease typically results in change that significantly influence an individual for the duration of his or her life. Nonetheless, with appropriate rehabilitation the surgical side effects can be minimized to allow for an excellent quality of life. Successful conservation surgery for laryngeal cancer requires careful interdependent selection for patients, lesions and procedure. The technical goal is to minimize trauma to uninvolved tissue and to wisely utilized local tissues or tree flap for reconstruction, while insuring for oncologically sound procedure. Rehabilitation should aim to produce a glottal sound source if possible, however voice therapy to promote false vocal fold vibration and arytenoid to epiglottis source of vibration can produce very satisfactory phonatory results.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.368-371
• /
• 1998

The work aims to evaluate the necessary physical properties of Abrasion Resistant Pavers designed for high volume pedestrian and road vehicle traffic and their influence on the selection of raw materials and ceramic processes. The pavers' specifications such as high strength and ware resistance demand a careful clay preparation, slow drying, slow firing and a balanced chemical and mineralogical composition. Therefore, developing abrasion Resistant Pavers in existing modern brickmaking plants, which are designed primarily for making bricks and pavers for domestic applications, has become a challenge for manufacturers and ceramic professionals. The significance of quality control and research and development in the production of these high class pavers is also emphasised in this work through the investigation of a paver that exhibits shrinkage cracking.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.3
• /
• pp.231-233
• /
• 2017

Wolf-Hirschhorn syndrome is a rare hereditary disease that results from a 4p chromosome deletion. Patients with this syndrome are characterized by craniofacial dysgenesis, seizures, growth delay, intellectual disability, and congenital heart disease. Although several cases have been reported, very little information is available on anesthetic management for patients with Wolf-Hirschhorn syndrome. We encountered a case requiring anesthetic management for a 2-year-old girl with Wolf-Hirschhorn syndrome. The selection of an appropriately sized tracheal tube and maintaining intraoperatively stable hemodynamics might be critical problems for anesthetic management. In patients with short stature, the tracheal tube size may differ from what may be predicted based on age. The appropriate size ( internal diameter ) of tracheal tubes for children has been investigated. Congenital heart disease is frequently associated with Wolf-Hirschhorn syndrome. Depending on the degree and type of heart disease, careful monitoring of hemodynamics is important.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.4
• /
• pp.57-65
• /
• 1999

A modified gas tracer method was used to obtain reaeration coefficient from an artificial channel and a reach of Bokha stream, Ichon city. Propane was used as the tracer gas and Rhodamine-B dye as a dispersion and dulution tracer. Concentrations of propane in water sample were measured using a gas chromatograph and concentrationsof dye using UV-Spectrophotometer. To compare measured values with predicted values,commonly used 14 equations were selected . Results of this study suggested that the modified gas tracer method is a potentially useful procedure for th edetermination of reaeration cofficients. However, estimated reaeration coefficients from predictive equations were significantly different from that of this study. Therefore, when using predictive equations, careful selection of equation with consideration for hydraulic characteristics such as flow depth and average velocity, or use of newly derived predictive equation which is adequate for questioned stream would be needed.