• Journal of Animal Science and Technology
• /
• 제49권2호
• /
• pp.203-212
• /
• 2007

돼지의 부분육의 중량과 수율의 개량을 위하여 생체에서 이를 측정할 수 있는 수단이 필요하다. 4개의 교잡 계통돈 돼지 432두에 대하여 시기별 생체 측정치와 도축자료를 조사하였다. 생체중 및 도체중 그리고 부분육의 중량은 도축일령에 의해 영향을 거의 모두 받고 있지만 수율에 있어서는 삼겹살과 목심에만 유의성있게 영향하는 것으로 나타났다. 부분육의 형질과 시기별 생체 측정치간의 상관 조사에서 대부분의 체측정치에서 검정 종료시의 측정치가 다른 시기의 측정치보다 상관이 높게 나타났고, 부분육 형질의 예측을 위한 회귀식에서도 검정 개시와 출하시의 체측정치 보다 검정 종료시 체측정치를 이용하였을 때 결정계수가 모든 부분육의 형질에서 높아 가장 정확하게 추정하였다. 부분육 형질을 평균 출하일령으로 보정한 뒤, 검정 종료시 체측정치의 3차 다항회귀 식에 의한 부분육 형질의 예측에서 중량과 수율의 결정계수가 각각 0.59~0.68과 0.33~0.43의 범위를 보여주어 이를 돼지의 부분육 형질의 개량을 위해 활용하면 국내 선호부위가 우수한 한국형 종돈의 생산이 기대된다.

• 한국축산식품학회지
• /
• 제30권6호
• /
• pp.905-909
• /
• 2010

Two sets of data on carcass traits and beef cut parameters were used to investigate the relationships between carcass and beef cut measurements, which can be used to make predictions of retail cut percentages. One set had a total of 1,141 measurements of Hanwoo cattle of three different sex origins, which were slaughtered in an abattoir located at the National Institute of Animal Science, RDA, Korea from 1996 to 2008. To develop prediction models for retail cut percentage with higher accuracies than the current model, another set consisting of a total of 13,389 records of carcass and beef cut traits were collected from 30 abattoirs and butcheries in Korea from 2008 to 2009. Bulls yielded heavier and leaner carcasses than steers. High correlation coefficients were estimated between amount of body fat and percent retail cut (-0.82) as well as between back fat thickness (BF) and percent retail cut (-0.62). The amount of retail cut, however, was highly correlated with body weight before slaughter (BW, 0.95) or with cold carcass weight (CWT, 0.94). Relationships between percent retail cut and measurable beef yield traits, BF, loin eye area (LEA) or CWT varied by sex class, which must be considered for development of a prediction model with high accuracy. Models of data for all breeds and sexes fit the effects of breed, sex, and interaction of abattoir by butchers, whereas models of data for each breed and sex fit the effect of interaction of abattoir by butcher only. Due to possible future changes in back fat control, we performed a log transformation of BF. Our new models fit better than the currently used model.

• Animal Bioscience
• /
• 제34권1호
• /
• pp.127-133
• /
• 2021

Objective: This study was conducted to evaluate the correlation between body size traits, carcass traits, and primal cuts in Hanwoo steers. Methods: Sixty-one beef carcasses were classified for conformation and primal cut weight. Additionally, carcass weight, fat thickness, carcass dimensions, and longissimus muscle area were determined to complement the grading. Results: The average live weight and cold carcass weight were 759 and 469 kg, respectively. The mean carcass meat, fat, and bone proportions were 551, 298, and 151 g/kg, respectively. Primal cuts weights showed significant positive correlations (p<0.001) of 0.42 to 0.82 with live weight, carcass weight, and longissimus muscle area and a significant negative correlation with carcass fat (without shank, -0.38 to -0.10). Primal cut weights were positively correlated (p<0.01) with carcass length (0.41 to 0.77), forequarter length (0.33 to 0.57), 6th lumbar vertebrae-heel length (0.33 to 0.59), 7th cervical vertebrae carcass breadth (0.35 to 0.58), 5th to 6th thoracic vertebrae breadth (0.36 to 0.65), 7th to 8th thoracic vertebrae girth (0.38 to 0.63), and coxae girth (0.34 to 0.56) and non-significantly related to cervical vertebrae length and coxae thickness. Conclusion: There was a high correlation among live weight, carcass weight, longissimus muscle area, carcass length, 7th cervical vertebrae carcass breadth, 5th to 6th thoracic vertebrae breadth, and 7th to 8th thoracic vertebrae girth of the primal cuts yield. The correlation between fat and primal cut yields was highly significant and negative. Carcass length and 7th to 8th thoracic vertebrae girth, appear to be the most important traits affecting primal cut yields.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권2호
• /
• pp.97-102
• /
• 1990

A procedure to standardize camel carcass fabrication is proposed. This includes a definitive method of jointing the carcass into wholesale neck, shoulder, brisket, rib, plate, loin, flank, rump and leg cuts. Carcass cutout data were collected from the right sides of 21 Najdi male camels averaging 8, 16 and 26 months of age in order to determine the influence of age on the weight of each wholesale cut. The weight of body, empty body, hot carcass, cold carcass, hump fat, kidney, pelvic and heart fat (KPH) and each wholesale cut increased (p < .01) with age. Except for percent shrinkage and wholesale rump weight, all studied traits increased (p < .01) linearly as the age increased. This change was most pronounced in wholesale flank and plate cuts, increasing by 4.2 and 3.4 times, respectively, while the rump and shoulder cuts changed the least, increasing by 1.8 and 1.9 times, respectively. Allometric growth coefficients indicated that as the camel grew, the weight of rib, brisket, plate and flank cuts increased relatively more rapidly than did cold carcass or empty body weight and that the weight of wholesale shoulder, neck, leg and rump increased less rapidly than did cold carcass or empty body weight.

• Journal of Animal Science and Technology
• /
• 제64권1호
• /
• pp.135-142
• /
• 2022

It is impossible to know the amount of pork primal cut by pig carcass grade which is determined only by carcass weight and backfat thickness in the Korean Pig Carcass System. The aim of this study was to investigate the correlation between the pig carcass grade and the amount of pork primal cut estimated with AutoFom III. A total of 419,321 Landrace, Yorkshire, and Duroc (LYD) pigs were graded with the Korean Pig Carcass Grade System. Amounts of belly, neck, loin, tenderloin, spare ribs, shoulder, and ham were estimated with AutoFom III. Regression equations for seven primal cuts according to each grade were derived. There were significant differences among the three carcass grades due to heteroscedasticity variance (p < 0.0001). Three regression equations were derived from AutoFom III estimation of primal cuts according to carcass grades. The coefficient of determination of the regression equation was 0.941 for grade 1⁺, 0.982 for grade 1, and 0.993 for grade 2. Regression equations obtained from this study are suitable for AutoFom III software, a useful tool for the analysis of each pig carcass grade in the Korean Pig Carcass Grade System. The high reliability of predicting the amount of primal cut with AutoFom III is advantageous for the management of slaughterhouses to optimize their product sorting in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권8호
• /
• pp.1074-1080
• /
• 2017

Objective: The growth, carcass and retail cut yield records on 1,428 Hanwoo steers obtained through progeny testing were analyzed in this study, and their heritability and genetic relationships among the traits were estimated using animal models. Methods: Two different models were compared in this study. Each model was fitted for different fixed class effects, date of slaughter for carcass traits and batch of progeny test live measurement traits, and a choice of covariates (carcass weight in Model 1 or backfat thickness in Model 2) for carcass traits. Results: The differences in body composition among individuals were deemed being unaffected by their age at slaughter, except for carcass weight and backfat thickness. Heritability estimates of body size measurements were 0.21 to 0.36. Heritability estimates of retail cut percentage were high (0.56 from Model 1 and 0.47 from Model 2). And the heritability estimates for loin muscle percentage were 0.36 from Model 1 and 0.42 from Model 2, which were high enough to consider direct selection on carcass cutability traits as effective. The genetic correlations between body size measurements and retail cut ratio (RCR) were close to zero. But, some negative genetic correlations were found with chest girths measured at yearling (Model 1) or at 24 months of age or with chest widths. Loin muscle ratio (LMR) was genetically negatively correlated with body weights or body size measurements, in general in Model 1. These relationships were low close to zero but positive in Model 2. Phenotypic correlation between cutability traits (RCR, LMR) and live body size measurements were moderate and negative in Model 1 while those in Model 2 were all close to zero. Conclusion: Therefore, the body weights or linear body measurements at an earlier age may not be the most desirable selection traits for exploitation of correlated responses to improve loin muscle or lean meat yield.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권6호
• /
• pp.617-625
• /
• 1995

Distribution of wholesale carcass cuts and tissues was studied in Omani Dhofari bulls and steers raised under intensive management and slaughtered over a range of 110 to 210 kg body weight. The fore quarter of Dhofari cattle carcasses was heavier than the hind quarter with the chuck being the heaviest cut in the half carcass followed by the round whereas the flank was the lightest cut. Proportions of the fore quarter and its cuts increased whereas that of the hind quarter and its cuts decreased with increasing carcass weight. The fore quarter contained higher proportions of carcass tissues especially intermuscular fat than the hind quarter. The chuck and round contained the highest proportions of lean and bone and the flank the least. There was a general trend of increasing proportions of fat and decreasing proportions of lean and bone in carcass cuts and fore and hind quarters with increasing slaughter weight and age. As % total body fat (TBF), total carcass fat (TCF) increased whereas total non-carcass fat (TNCF) decreased. The largest proportion of TBF was deposited in the intermuscular site. Among the TNCF depots, the kidney and omental contributed the highest proportions whereas the pelvic and channel were the lowest. Proportions of M. rhomboideus and M. splenius increased in the half carcass whereas that of M. semitendinosus decreased as the cattle increased in size. The axial skeleton contributed 47.4-51.1, the fore limb 21.6-22.6 and the hind limb 23.9-26.2% of the total carcass bone. Proportions of axial skeleton increased whereas that of fore and hind limbs decreased with increasing slaughter weight and age. There were no major effects of castration on the distribution of weight of carcass cuts or carcass tissues. Steers had higher total body fat at 160 kg body weight and higher proportions of mesenteric, scrotal, pelvic, kidney and total non-carcass fat at 210 kg weight than bulls. As % of total body fat, steers fad significantly higher kidney and total non-carcass fat. There was little effects of castration on proportions of dimensions of individual muscles or bones.

• Animal Bioscience
• /
• 제35권10호
• /
• pp.1489-1498
• /
• 2022

Objective: The objective of this study was to identify polymorphism in olfactomedin like 3 (OLFML3) gene, and association analysis with meat quality, carcass characteristics, retail meat cut, and fatty acid composition in sheep, and expression quantification of OLFML3 gene in phenotypically divergent sheep. Methods: A total of 328 rams at the age of 10 to 12 months with an average body weight of 26.13 kg were used. A novel polymorphism was identified using high-throughput sequencing in sheep and genotyping of OLFML3 polymorphism was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Among 328 rams, 100 rams representing various sheep genotypes were used for association study and proc general linear model was used to analyse association between genotypes and phenotypic traits. Quantitative real-time polymerase chain reaction (qRT-PCR) was used for the expression analysis of OLFML3 mRNA in phenotypically divergent sheep population. Results: The findings revealed a novel polymorphism in the OLFML3 gene (g.90317673 C>T). The OLFML3 gene revealed three genotypes: CC, CT, and TT. The single nucleotide polymorphism (SNP) was found to be significantly (p<0.05) associated with meat quality traits such as tenderness and cooking loss; carcass characteristics such as carcass length; retail meat cut such as pelvic fat in leg, intramuscular fat in loin and tenderloin, muscle in flank and shank; fatty acids composition such as tridecanoic acid (C13:0), palmitoleic acid (C16:1), heptadecanoic acid (C17:0), ginkgolic acid (C17:1), linolenic acid (C18:3n3), arachidic acid (C20:0), eicosenoic acid (C20:1), arachidonic acid (C20:4n6), heneicosylic acid (C21:0), and nervonic acid (C24:1). The TT genotype was associated with higher level of meat quality, carcass characteristics, retail meat cut, and some fatty acids composition. However, the mRNA expression analysis was not different among genotypes. Conclusion: The OLFML3 gene could be a potential putative candidate for selecting higher quality sheep meat, carcass characteristics, retail meat cuts, and fatty acid composition in sheep.

• 한국축산식품학회지
• /
• 제18권4호
• /
• pp.307-315
• /
• 1998

To develop processed meat products of pheasant, cut-up parts of pheasant carcass was analyzed, and eight different pheasant meat products were prepared and evaluated for sensory qualities. The average live weight of pheasant was 1,089.2g, and the ratio of carcass to live weight was 75.6%. The cut-up part ratios of breast, leg, neck, back and wings to carcass weight were 33.4%, 22.5%, 5.0%, 4% and 9.5%, respectively. The chemical compositions of breast and leg meat were shown to be moisture of 73.72% and 75.58%, protein of 25.31% and 22.69%, fat of 0.28% and 0.83%, and ash of 0.84% and 0.90%, respectively. Sensory evaluation of eight different meat products of pheasant revealed that all products of pheasant meat, except frankfurt sausage, received equal or better taste score compared with products of chicken or pork, and flavor score except pressed ham and salad. Color, binding ability and particle perception scores of pheasant meat products were equal or superior to those of respective meat products of chicken or pork. The present results suggest that pheasant meat has a potential to be utilized for various value-added products and that the meat bun is the most promising product of pheasant meat. A reinforcement of color, binding ability and particle perception of meat products of other species could also be expected by addition of pheasant meat to them.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권4호
• /
• pp.550-556
• /
• 2009

This study was designed to evaluate the effects of dietary prebiotic (mannan oligosaccharide = MOS) and probiotic (Saccharomyces cerevisiae = SC) in finishing turkey diets on carcass, cut yield, meat composition and colour. A total of 72 ten-weeksold Big6 male turkey poults were used in the trial. There were eight replicate floor pens per floor with three birds in each. The experiment lasted up to 20 wks of age. The trial was set up as a completely randomized design with 3 dietary treatments. The treatments were: i) negative control (C, no additive); ii) MOS 1 g per kg of diet and iii) SC 1 g per kg of diet (strain SC47, $300{\times}10^{10}$ CFU/kg). Body weight (BW) and feed intake were determined for each of the two week intervals. Twenty-four birds were slaughtered and eviscerated to determine carcass, carcass parts and internal organ weights at 20 wks of age. Meat colour and pH levels were measured 24 h after slaughter. The dietary treatments did not affect BW and average daily gain during the trial (p>0.05). The average daily feed intake and feed conversion ratio of turkey toms fed with MOS were higher than those of control and SC groups during the overall period (p<0.05). The dietary treatments did not affect carcass yield, breast meat, thigh, wing, liver, heart, empty gizzard, intestine, and abdominal fat pad proportions and meat pH, composition and pigmentation (p>0.05). These results suggest that the addition of MOS and SC is not likely to produce any performance or carcass characteristics in finishing turkeys at 10 to 20 wks of age.