• 전기화학회지
• /
• 제6권3호
• /
• pp.187-195
• /
• 2003

The present article is concerned with the overview of carbonaceous materials used as anode materials for lithium ion secondary batteries. This article first classified carbonaceous materials into graphite, soft carbon and hard carbon according to their crystal structures, and then summarised the previous works on the characteristics of lithium intercalation/deintercalation into/from the carbonaceous materials. Finally this article reviewed our recent research works on the mechanism of lithium transport through graphite, soft carbon and hard carbon electrodes from the kinetic view point by the analysis of the theoretical and experimental potentiostatic current transients.

• KSTLE International Journal
• /
• 제10권1_2호
• /
• pp.43-47
• /
• 2009

Influences of carbonaceous ingredient as a solid lubricant in automotive friction materials on friction properties were studied. Three types of carbonaceous ingredients such as natural graphite, artificial graphite, and cokes were mixed using a constrained mixture design. A 1/5 scale brake dynamometer was used to obtain tribological properties. Results showed that cokes substantially increased the friction coefficient, and natural graphite effectively reduced stick-slip phenomena. This significant difference was attributed to the formation of the friction film on the brake pad which was shown to be strongly dependent on the graphite types. The different crystal structures of the carbonaceous solid lubricants played a significant role in the formation of friction film at the interface.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.42-45
• /
• 2005

Accurate prediction of the fate and transport of contaminants in soils and sediments is very Important to environmental risk assessment and effective remediation of contaminated soils and sediments. The fate and transport of contaminants in subsurface are affected by geosorbents, especially carbonaceous materials including black carbon. Various physical and chemical treatment methods have been developed to separate different kinds of carbonaceous materials from soils and sediments. However, the effects of these separation methods on the properties of remaining carbonaceous materials including sorption capacity and linearity are unclear. The objective of this study is to determine if the chemical and thermal treatment methods previously used to separate different carbonaceous material fractions affect the properties of carbonaceous materials including longer term sorption capacity of hydrophobic organic contaminants. The results indicate that treatments with hydrochloric acid (HCl)/hydrofluoric acid (HF), trifluoroacetic acid (TFA), sodium hydroxide (NaOH) may not affect the sorption capacity of black carbon reference materials such as char and soot, however, treatments with acid dichromate $(K_2Cr_2O_7/H_2SO_4)$ and heat $(375^{\circ}C)$ for 24 hours in sufficient of oxygen) decrease the sorption capacity of them. The results of longer term sorption isotherm indicate that 2 days might be enough for trichloroethene (TCE) to equilibrate apparently with treated black carbon reference materials. The results suggest that acid dichromate and heat treatments may not appropriate method to investigate sorption properties of black carbon in soils and sediments.

• Carbon letters
• /
• 제7권4호
• /
• pp.249-258
• /
• 2006

Treatment of water hyacinth with sulphuric acid produces carbonaceous materials that have been used to remove Cu(II) and Cd (II) ions from aqueous solutions. Untreated water hyacinth was also used for the subject of comparison. The textural properties of the carbonaceous materials were determined from nitrogen adsorption at 77 K. The optimum pH for the sorption of Cu (II) and Cd (II) ions on the investigated sorbents was determined. Dynamic adsorption measurements have been taken at 298 K whereas equilibrium measurements were carried out at 298, 313 and 323 K. The adsorption of nitrogen at 77 K on the untreated sample was too low and the surface areas of the treated samples 2, 3 and 4 were found between $70-208\;m^2/g$. The total pore volumes of these samples which were determined for the carbonaceous materials investigated were found to be 0.076-0.140 ml/g. The kinetic adsorption data of Cu (II) and Cd(II) were applicable to both pseudo - first and pseudo-second order but fit more the latter order. The equilibrium adsorption data were found to fit Freundlich and Langmiur equations. The values of DG, DH and DS are all negative indicating the feasibility and the spontaneous nature of the sorption of Cu (II) and Cd (II) ions by the sorbents investigated.

• 공업화학
• /
• 제24권5호
• /
• pp.489-493
• /
• 2013

기존의 EDLC용 활성탄소 대신 리튬이차전지용 탄소류 음전극(천연흑연, 인조흑연, 하드카본, MCMB)을 이용해 리튬이온 커패시터를 구성하면 리튬의 층간 삽입반응으로 인해 기존의 물질보다 에너지 밀도가 큰 전극소재를 개발할 수 있을 것이다. 이 실험에서는 기존 리튬이차전지 음극용 탄소 물질을 대칭 전극으로 사용하여 코인형 커패시터를 제조하여 성능을 측정하였다. 또한 리튬을 미리 삽입시킨 탄소류 전극을 이용한 커패시터를 제조한 후 성능을 측정한 결과, 축전현상이 일어나는 것을 알 수 있었다. 즉 전해액에서 전하분리에 의한 리튬이온의 이동을 보충할 수 있다면 기존의 리튬이온은 탄소류 전극의 층간으로 확산되어 들어가 기존의 대칭성 탄소류 전극의 경우에 비해 축전 용량이 증가한다. 또한 표면적이 매우 큰 graphene oxide를 사용하여 위와 같이 실험한 결과 용량이 크게 나왔으며 이로부터 슈퍼커패시터 전극용 물질에는 높은 비표면적이 중요한 요소로 작용한다는 것을 알 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.97-102
• /
• 2007

The charging/discharging characteristics of electric double layer capacitors (EDLCs) for an electric power storage device application were investigated. The specific area of the carbonaceous electrode surface by the BET method was in the range of $1800{\sim}2000\;m^2/g$. The charge distributions during charging and discharging were measured by means of a pulsed-electro-acoustic (PEA) method, and the voltage characteristics of EDLCs connected to solar cells were evaluated. The results showed that the distributions of positive and negative charges were spatially uneven, which was due to the mobility of the positive and negative charges in the carbonaceous electrode surface of the EDLCs. The charge accumulation region concentrated on central part of the carbonaceous electrode and the required times for charging and discharging were almost same.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.170-177
• /
• 2001

Lithium intercalated carbon (LIC) are basically employed as an anode for currently commercialized lithium secondary batteries. However, there are still strong interests in modifying carbon surface of active materials of the anode because the amount of irreversible capacity, charge-discharge capacity and high rate capability are largely determined by the surface conditions of the carbon. In this study, the carbonaceous materials were coated with tin oxide and copper by fluidized-bed chemical vapor deposition (CVD) method and their coating effects on electrochemical characteristics were investigated. The electrode which coated with tin oxides gave the higher capacity than that of raw material. Their capacity decreased with the progress of cycling possibly due to severe volume changes. However, the cyclability was improved by coating with copper on the surface of the tin oxides coated carbonaceous materials, which plays an important role as an inactive matrix buffering volume changes. An impedance on passivation film was decreased as tin oxides contents and it resulted in the higher capacity.

• Composites Research
• /
• 제31권2호
• /
• pp.76-81
• /
• 2018

In this study, the elemental mercury removal behaviors of silver-plated porous carbons materials were investigated. The pore structures and total pore volumes of the hybrid materials were analyzed by $N_2$ adsorption/desorption analysis at 77 K. The pore structures and surface morphologies of the hybrid materials were characterized by XRD and SEM, respectively. The elemental mercury adsorption capacities of all silver-plated porous carbons hybrid materials were higher than those of the as-received samples, despite the fact that the specific surface areas and total pore volumes decreased with increasing metal loading time. It was found that silver nanoparticles showed excellent elemental mercury removal behaviors in carbonaceous hybrid materials.

• 조명전기설비학회논문지
• /
• 제24권7호
• /
• pp.57-63
• /
• 2010

Photo-capacitor electrodes are attracting great attention because of their high capacitance and potential applications in electronic devices. Carbon capacitor, active carbon capacitor and its combination will be fabricated using a sandwich method as carbonaceous material on each type of storable electrode with $20{\times}15$[mm] cell size. Carbon/active carbon cell was fabricated using sol-gel process with $120[^{\circ}C]$ dry temperature in 2hour and using sintering process with $500[^{\circ}C]$ in 2hour. The effect of sintering temperature on carbon properties was also investigated with an X-ray diffraction technique to get the best sintering temperature. The detail of the fabrication process will be explained. Active carbon as carbonaceous material has a better capacitance in storable electrode with mean thickness $32[{\mu}m]$ and with particle size $1[{\mu}m]$ to $4.5[{\mu}m]$ in $20{\times}15$[mm] sample size of storable electrode.

• Applied Microscopy
• /
• 제39권1호
• /
• pp.73-77
• /
• 2009

Contaminative artifacts such as carbonaceous materials on carbon-coated microgrids are unavoidable, which is induced by electron beam exposure inside electron microscopes. This phenomenon raise a source to produce confusing information to the samples investigated by analytical TEM, which should be alleviated as much as possible. As experimental precautions for reducing this unwanted effect, the use of $LN_2$ cooled anti-contaminator and pre-illumination of electron beam at low magnification can be helpful. Nevertheless, we should be cautious to set an illumination condition for microanalysis because the contaminative effect is dependent with the types of irradiation situations, which is well known to be a decisive factor for causing the carbonaceous artifacts. Accordingly, it is necessary that optimal illumination to minimize the contaminative effect should be selected for improving the accuracy of microanalysis. In this paper, we introduce the practical method to determine the optimal illumination condition by evaluating the contaminative effect as a function of instrumental spot size, which is directly linked with electron current density.