• KSBB Journal
• /
• v.29 no.1
• /
• pp.72-80
• /
• 2014

CW-4Y was identified as Stenotrophomonas sp. by morphological and physiological characteristics, and phylogenetic analysis of its 16S rDNA gene sequence. Nitrogen removal by CW-4Y was analyzed in relation to the ammonium concentration, presence of organic carbon, carbon source, and carbon-to-nitrogen ratio (C/N). Stenotrophomonas CW-4Y has heterotrophic nitrification and aerobic denitrification abilities. Stenotrophomonas CW-4Y utilized only glucose as carbon sources, and heterotrophic nitrification and aerobic denitrification were observed regardless of the type of nitrogen source. The maximum ammonium removal rate of CW-4Y was 80 $mg-N{\cdot}L^{-1}{\cdot}d^{-1}$ and its denitrification rate of 192 $mg-N{\cdot}L^{-1}{\cdot}d^{-1}$ at $NO_3{^-}-N$ (about 280 ppm) in shake culture experiments at a C/N ratio of about 15 was about 30 times higher than those of other bacteria with the same ability.

• Carbon letters
• /
• v.3 no.4
• /
• pp.198-204
• /
• 2002

In this paper, impregnated activated carbon fiber (IACF) was manufactured to pitch-based activated carbon fibers (ACF) with potassium hydroxide (KOH) by using wet impregnation method to raise nitrogen oxides ($NO_x$) adsorptivity. The properties of IACF were observed using EPMA, TGA and DSC and $NO_x$ adsorptivity was observed at high and low temperature. Before and after adsorption was analyzed using ToF-SIMS for examine surface characterization of adsorbed $NO_x$. The results showed that the better adsorptivity appeared for increasing KOH ratio. So, $NO_x$ adsorptivity showed result that is proportional between KOH and the adsorbed amount. On the other hand, adsorbent that manufactured without washing was better $NO_x$ adsorptivity than adsorbent that manufactured with washing. The behavior of adsorption show that crossing time of NO and $NO_2$ delayed for a rising adsorptivity. And NO ratio increased but $NO_2$ ratio decreased according as KOH ratio increases. $NO_x$ was confirmed through surface analysis that remain in $NO_2^-$ and $NO_3^-$ form on IACF surface.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.6
• /
• pp.391-396
• /
• 1997

Two series of carbon sources, linear primary $C_1$~$C_9$ alcohols and linear $C_2$~$C_{10}$ monocarboxylic acids were tested for PHA synthesis in Paracoccus denitrificans. The results showed that the growth-associated synthesis of PHA could be referred only to the carbon sources with odd number of carbon except methanol. For all carbon sources with even number of carbon, nitrogen limitation was required to induce PHA synthesis in P. denitrificans. Poly(3-hydroxyvalerate)[P(3HV)] homopolymer was synthesized from $C_5$, $C_7$, and $C_9$ while growing in the presence of nitrogen, but the nitrogen depletion in the later growth period incorporated 3-hydroxybutyrate(3HB) unit into the polymer chain. The optimum C/N ratio for P(3HV) homopolymer production was found to be 10 when the strain was grown on 10 ml/l of valeric acid for 96 h. P. denitrificans synthesized P(3HB-co-3HV) copolymers from n-hexanoic and n-octanoic acid. The microstructural characterics of the P(3HB-co-3HV) copolymer from n-propanol was investigated using $^13C$-nuclear magnetic resonance spectroscopy, showing a structural heterogeneity.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.531-539
• /
• 2020

To understand the composition, quantity, and quality of Suspended Particulate Organic Matter (SPOM) in the Gangneung Namdae Stream, Korea, we examined spatiotemporal variations in water temperature, salinity, chlorophlly a (Chl a), Particulate Organic Carbon (POC) and nitrogen (PON), and carbon stable isotope (δ¹³C) of SPOM at six stations in June (pre-monsoon), July (monsoon), and September (post-monsoon) 2017. With increasing precipitation, the average POC and C/N values increased significantly in July than in June. In September, the values decreased with decreasing precipitation. The δ¹³C values showed irregular spatiotemporal fluctuations among the stations and periods, thereby suggesting a greater contribution of autochthonous organic matter to the pool of SPOM than that of allochthonous organic matter derived from upstream. In addition, the large and irregular changes in POC, C/N ratio, C:Chl a, and δ¹³C compared to that of PON were observed for all periods among the stations, indicating a serial discontinuity of the stream. Our results suggest that the Gangneung Namdae Stream is significantly influenced by the increase in freshwater discharge caused by heavy rainfalls during the summer monsoon and post-monsoon periods.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.248-255
• /
• 2000

Penning type sputtering system which has two opposed targets was implemented and the physical characteristics of the deposited carbon nitride films were investigated. When argon ratio was reduced and nitrogen ratio was increased in the sputtering gas mixture, Fe was less sputtered. The grain size of grown carbon nitride films was distributed from $150{\AA}$ to $250{\AA}$. As nitrogen partial pressure increases, growth rate and nitrogen incorporation in the film increases.

• Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.1-11
• /
• 2018

Background: In the study, the effects of elevated $CO_2$ and temperature on the nitrogen content, carbon content, and C:N ratio of seven rare and endangered species (Quercus gilva, Hibiscus hambo, Paliurus ramosissimus, Cicuta virosa, Bupleurum latissimum, Viola raddeana, and Iris dichotoma) were examined under control (ambient $CO_2$ + ambient temperature) and treatment (elevated $CO_2$ + elevated temperature) for 3 years (May 2008 and June 2011). Results: Elevated $CO_2$ concentration and temperature result in a decline in leaf nitrogen content for three woody species in May 2009 and June 2011, while four herb species showed different responses to each other. The nitrogen content of B. latissimum and I. dichotoma decreased under treatment in either 2009 and 2011. The leaf nitrogen content of C. virosa and V. raddeana was not significantly affected by elevated $CO_2$ and temperature in 2009, but that of C. virosa increased and that V. raddeana decreased under the treatment in 2011. In 2009, it was found that there was no difference in carbon content in the leaves of the six species except for that of P. ramosissimus. On the other hand, while there was no difference in carbon content in the leaves of Q. gilva in the control and treatment in 2011, carbon content in the leaves of the remaining six species increased due to the rise of $CO_2$ concentration and temperature. The C:N ratio in the leaf of C. virosa grown in the treatment was lower in both 2009 and 2011 than that in the control. The C:N ratio in the leaf of V. raddeana decreased by 16.4% from the previous year, but increased by 28.9% in 2011. For the other five species, C:N ratios increased both in 2009 and 2011. In 2009 and 2011, chlorophyll contents in the leaves of Q. gilva and H. hamabo were higher in the treatment than those in the control. In the case of P. ramosissimus, the ratio was higher in the treatment than that in the control in 2009, but in 2011, the result was the opposite. Among four herb species, the chlorophyll contents in the leaves of C. virosa, V. raddeana, and I. dichotoma did not show any difference between gradients in 2009, but decreased due to the rise of $CO_2$ concentration and temperature in 2011. Leaf nitrogen and carbon contents, C:N ratio, and chlorophyll contents in the leaves of seven rare and endangered species of plant were found to be influenced by the rise and duration of $CO_2$ concentration and temperature, species, and interaction among those factors. Conclusions: The findings above seem to show that long-term rise of $CO_2$ concentration, and temperature causes changes in physiological responses of rare and endangered species of plant and the responses may be species-specific. In particular, woody species seem to be more sensitive to the rise of $CO_2$ concentration and temperature than herb species.

• ALGAE
• /
• v.32 no.4
• /
• pp.349-357
• /
• 2017

Korean mariculture Undaria pinnatifida was collected during the months of January, February, March, and December of 2010, as well as from January of 2011 to investigate the changes in the carbon and nitrogen stable isotope ratios (${\delta}^{13}C$ and ${\delta}^{15}N$) and heavy metal with respect to it growth and to identify the factors that influence such changes. The blades of U. pinnatifida showed ${\delta}^{13}C$ and ${\delta}^{15}N$ in the range (mean) of -13.11 to -19.42‰ (-16.93‰) and 2.99 to 7.57‰ (4.71‰), respectively. Among samples with the same grow-out period, those that weighed more tended to have higher ${\delta}^{13}C$ suggesting a close association between the carbon isotope ratio and growth rate of U. pinnatifida. Indeed, we found a very high positive linear correlation between the monthly average ${\delta}^{13}C$ and the absolute growth rate in weight ($r^2=0.89$). Nitrogen isotope ratio tended to be relatively lower when nitrogen content in the blade was higher, probably due to the strengthening of isotope fractionation stemming from plenty of nitrogen in the surrounding environment. In fact, a negative linear correlation was observed with the nitrate concentration in the nearby seawaters ($r^2=0.83$). Concentrations of Cu, Cd, Pb, Cr, Hg, and Fe in the blades showed a rapid decrease in their concentration per unit weight in the more mature U. pinnatifida. Specifically, compared to adult samples, Cu, Hg, and Pb were concentrated by 30, 55, and 73 folds, respectively, in the young blades. Therefore, U. pinnatifida tissue ${\delta}^{13}C$ is as an indirect indicator of its growth rate, while ${\delta}^{15}N$ values and heavy metal concentrations serve as tracers that reflect the environmental characteristics.

• Composites Research
• /
• v.31 no.5
• /
• pp.267-275
• /
• 2018

A facile method for the preparation of nitrogen-doped microporous carbon via the pyrolysis of poly(vinylidene fluoride) (PVDF) using polypyrrole (PPy) as a selective nitrogen source was developed. A PVDF/PPy-800 sample (carbonized at $800^{\circ}C$) with a 1:0.5 ratio of PVDF and PPy exhibited the highest micropore volume. The activated microporous carbon materials obtained from PVDF/PPy-800 prepared at $800^{\circ}C$ with KOH possessed a large specific surface area and narrow pore-size distribution. They were characterized using $N_2$ adsorption at 77 K and argon (Ar) adsorption at 87 K, which allowed for the characterization of the narrow microporosity of the prepared materials due to the absence of interactions between Ar and the sample surface. In addition, the activated microporous carbon material with a KOH/carbon ratio of 2:1 was found to exhibit the largest specific surface area ($1296m^2g^{-1}$ in $N_2$ at 77 K) and microporosity, and a high specific capacitance ($122.8F\;g^{-1}$).

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.124-130
• /
• 2013

The effects of environmental and nutritional requirement such as temperature, pH, different media, carbon, nitrogen, and carbon-to-nitrogen ratio on the mycelial growth of Cordyceps militaris strain 'Yedang 3' were studied. The optimum temperature and pH for the growth of mycelium were $20-25^{\circ}C$ and pH 6-7, respectively. Out of ten media tested, mushroom complete media (MCM) was the best medium for fast mycelial growth, and Sabouraud's dextrose agar yeast extract (SDAY), malt extract yeast extract agar (YMA) also were favored. The color and shape of colonies varied in different media. The best carbon sources for mycelial growth were fructose, mannitol, and sucrose, whereas the best nitrogen sources were tryptone and peptone. However, mycelia grew slowly in inorganic nitrogen compounds such as $NH_4Cl$, $(NH_4)_2SO_4$, $NH_4NO_3$, and $NaNO_3$. The optimum C:N ratio observed on the culture media was 30-40 range. These results provided basic information on cultural characteristics of vegetative growth and might be useful for spawn production in Cordyceps militaris.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.