• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1142-1147
• /
• 2008

Nano-MgO와 메조페이스 피치로부터 복합 탄소섬유를 만들고 MgO를 제거함으로써 직접 메탄올 연료전지용 촉매 담지체로서의 다공성 탄소섬유를 제조하였다. 이 다공성 탄소섬유의 비표면적은 $8{\sim}58m^2/g$ 이고, 표면기공구조는 마이크로기공이 거의 없이 MgO 입자크기 유래의 메조기공(10~15 nm)으로 구성된 것이 특징이며, MgO 혼입량(1~10 wt%)에 따라 조절할 수 있었다. 본 다공성 탄소섬유를 담지체로 이용하여 함침법으로 60 wt% Pt-Ru 촉매를 담지하였으며, 제조된 Pt-Ru 촉매의 메탄올 산화 특성 및 단위전지 성능 측정 결과 상용촉매에 비하여 5~10% 이상 향상된 값을 나타내었다

• 공업화학
• /
• 제17권2호
• /
• pp.223-228
• /
• 2006

직접 메탄올 연료전지에서 촉매 담지체로서 세공 크기별 균질한 다공성 탄소는 메조페이스 핏치와 졸-겔법으로 직접 합성한 구형 실리카를 이용하여 제조하였다. Tetrahydrofuran (THF)에 용해된 핏치와 메탄올에 분산된 구상의 실리카를 혼합하고 탄화한 후에 5 M NaOH로 실리카를 식각하여 다공성 탄소를 만들었다. 이 다공성탄소의 비표 면적은 사용된 구형 실리카의 입자 크기가 작을수록 증가하였으며, $14.7{\sim}87.7m^2/g$ 범위를 나타내었다. 평균 기공 직경 또한 사용된 실리카 입자크기에 따라 50~550 nm로 다양하게 나타났다. 다공성 탄소 담지체에 백금과 루테늄을 담지시키기 위해 액상환원법을 사용하였고, 60 wt% 백금-루테늄이 담지된 촉매의 전기 산화 활성 및 전극 성능 특성은 순환 전압 전류법과 단위전지 시험으로 평가하였다. 본 실험 범위 중 50 nm 실리카를 이용하여 제조한 백금-루테늄/다공성탄소의 경우(60 wt% Pt-Ru/porous carbon), 순환 전압 전류법 시험에서 0.4 V에서의 전류 밀도 값이 $123mA/cm^2$가 측정되었고, 단위전지 성능 시험에서는 최대 전력 밀도 값이 $60^{\circ}C$와 $80^{\circ}C$, 산소분위기에서 각각 105, $162mW/cm^2$를 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.159-159
• /
• 2009

In this work, nitrogen and oxygen functionalities was introduced to the graphite nanofibers (GNFs) and their effect on electrocatalytic performance of the GNF supports for direct methanol fuel cells (DMFCs) was invesigated. The nitrogen and oxygen groups were introduced through the urea treatments and acid treatment, respectively. And, PtRu catalysts deposited on modified GNFs were prepared by a chemical reduction method. The catalysts were characterized by means of elemental analysis, nitrogen adsorption, and X-ray photoelectron spetroscopy (XPS). The structure and morphological characteristics of the catalysts were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). As a result, the Pt-Ru nanoparticles were impregnated on GNFs with good formation in 3-5 nm. And, the cyclic voltammograms for methanol oxidation revealed that the methanol oxidation peak varied depending on changes of surface functional groups. It was thus considered that the PtRu deposition was related to the reduction of PtRu and surface characteristics of the carbon supports. The changes of surface functional groups were related to PtRu reduction, significantly affect the methanol oxidation activity of anode electrocatalysts in DMFCs.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.652-655
• /
• 2009

The bimodal porous carbons were synthesized by using imprinting method with templates of SBA-15 particle and silica sphere and applied as supporting materials for the electro-catalyst of polymer electrolyte fuel cell (PEFC). The silica spheres with diameter size of 100 nm and SBA-15 particle having 200 nm -250 nm diameter and 700 nm -900 nm length were synthesized in this work. The bimodal porous carbons (S100) were prepared by using the silica spheres and SBA-15 as templates and mesophase pitch as a carbon source. The PtRu nanoparticle of ca. 1.9 nm were supported on the bimodal porous carbon support and the resulting PtRu/S100 catalysts was tested by the cyclic voltammetry. The use of bimodal porous carbon showed in comparable electro-catalytic activities with commercial catalyst. Though unclear effects of bimodal porosity of supports could be obtained in the scope of this study, morphological advantage in electrical conductivity can be considered on the electro-catalytic activity.

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.149-159
• /
• 2018

Thermo-mechanical buckling of sandwich beams with a stiff core and face sheets made of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) within the framework of Timoshenko beam theory is presented. The material properties of FG-CNTRC are supposed to vary continuously in the thickness direction and are estimated through the rule of mixture. Also the properties of these materials should be considered temperature dependent. The governing equations and boundary conditions are derived by using Hamilton's principle and solved using an efficient technique called the Differential Transform Method (DTM) to achieve the critical buckling of the sandwich beam in uniform thermal environment. A detailed parametric study is guided to investigate the effects of carbon nanotube volume fraction, slenderness ratio, core-to-face sheet thickness ratio, and clamped-clamped, simply-simply and clamped-simply end supports on the critical buckling behavior of sandwich beams with FG-CNTRC face sheets. Numerical results for comparison of sandwich beams with uniformly distributed carbon nanotube-reinforced composite (UD-CNTRC) face sheets with those with FG-CNTRC face sheets are also presented.

• 천문학회보
• /
• 제37권2호
• /
• pp.140.2-140.2
• /
• 2012

The silicate carbon star IRAS 09425-6040 shows very conspicuous crystalline silicate dust features and excessive emission at far infrared. To investigate properties of dusty envelopes around the object, we use radiative transfer models for axisymmetric and sphericallly symmetric dust distributions. We perform model calculations for various possible combinations of dust shells and disks with various dust species. We compare the model results with the observed spectral energy distributions (SEDs) including the IRAS, ISO, AKARI, MSX and 2MASS data. We find that a model with multiple disks of amorphous and crystalline silicate and multiple spherical shells of carbon dust can reproduce the observed SED fairly well. This supports the scenario for the origin of silicate carbon stars that oxygen-rich material was shed by mass loss when the primary star was an M giant and the O-rich material is stored in a circumbinary disk. Highly (about 75 %) crystallized forsterite dust in the disk can reproduce the conspicuous crystalline features of the ISO observational data. This object looks to have a detached silicate and H2O ice shell with a much higher mass-loss rate. It could be a remnant of the chemical transition phase. The last phase of stellar winds of O-rich materials looks to be a superwind.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.332-336
• /
• 2018

Alkaline oxygen electrocatalysis, targeting anion exchange membrane alkaline-based metal-air batteries has become a subject of intensive investigation because of its advantages compared to its acidic counterparts in reaction kinetics and materials stability. However, significant breakthroughs in the design and synthesis of efficient oxygen reduction catalysts from earth-abundant elements instead of precious metals in alkaline media still remain in high demand. One of the most inexpensive alternatives is carbonaceous materials, which have attracted extensive attention either as catalyst supports or as metal-free cathode catalysts for oxygen reduction. Also, carbon composite materials have been recognized as the most promising because of their reasonable balance between catalytic activity, durability, and cost. In particular, heteroatom (e.g., N, B, S or P) doping on carbon materials can tune the electronic and geometric properties of carbon, providing more active sites and enhancing the interaction between carbon structure and active sites. Here, we focused on boron and nitrogen doped nanocarbon composit (BNC nanocarbon) catalysts synthesized by a solution plasma process using the simple precursor of pyridine and boric acid without further annealing process. Additionally, guidance for rational design and synthesis of alkaline ORR catalysts with improved activity is also presented.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.223-229
• /
• 2013

Polymer Electrolyte Membrane Fuel Cell (PEMFC) is a power generation system to convert chemical energy of fuels and oxidants to electricity directly by electrochemical reactions. As a catalyst support for PEMFCs, carbon black has been generally used due to its large surface area and high electrical conductivity. However, under certain circumstances (start up/shut down, fuel starvation, ice formation etc.), carbon supports are subjected to serve corrosion in the presence of water. Therefore, it would be desirable to switch carbon supports to corrosion-resistive support materials such as metal oxide. $TiO_2$ has been attractive as a support with its stability in fuel cell operation atmosphere, low cost, commercial availability, and the ease to control size and structure. However, low electrical conductivity of $TiO_2$ still inhibits its application to catalyst support for PEMFCs. In this paper, to explore feasibility of $TiO_2$ as a catalyst support for PEMFCs, $TiO_2$ nanofibers were synthesized by electrospinning and calcinated at 600, 700, 800 and $900^{\circ}C$. Effects of calcination temperature on crystal structure and electrical conductivity of electrospun $TiO_2$ nanofibers were examined. Electrical conductivity of $TiO_2$ nanofibers increased significantly with increasing calcination temperature from $600^{\circ}C$ to $700^{\circ}C$ and then increased gradually with increasing the calcination temperature from $700^{\circ}C$ to $900^{\circ}C$. It was revealed that the remarkable increase in electrical conductivity could be attributed to phase transition of $TiO_2$ nanofibers from anatase to rutile at the temperature range from $600^{\circ}C$ to $700^{\circ}C$.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.667-672
• /
• 2023

This study proposes polymer electrolyte membrane fuel cell (PEMFC) based cogeneration system for greenhouse heating and cooling. The main scope of this study is to examine the proposed cogeneration system's suitability for the 660 m²-class greenhouse. A 25 kW PEMFC system generates electricity for two identical air-cooled heat pumps, each with a nominal heating capacity of 70 kW and a cooling capacity of 65 kW. Heat recovered from the fuel cell supports the heat pump, supplying hot water to the greenhouse. In cooling mode, the adsorption system provides cold water to the greenhouse using recovered heat from the fuel cell. As a result, the cogeneration system satisfies both heating and cooling capability, performing 175 and 145 kW, respectively.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.559-569
• /
• 2018

Catalytic supports made of carbon have many advantages, such as high coking resistance, tailorable pore and surface structures, and ease of recycling of waste catalysts. Moreover, they do not require pre-reduction. In this study, ash-free coal (AFC) was obtained by the thermal extraction of carbonaceous components from raw coal and its performance as a carbon catalytic support was compared with that of well-known activated carbon (AC). Nickel was dispersed on the carbon supports and the resulting catalysts were applied to the steam reforming of toluene (SRT), a model compound of biomass tar. Interestingly, nickel catalysts dispersed on AFC, which has a very small surface area (${\sim}0.13m^2/g$), showed higher activity than those dispersed on AC, which has a large surface area ($1,173A/cm^2$). X-ray diffraction (XRD) analysis showed that the particle size of nickel deposited on AFC was smaller than that deposited on AC, with the average values on AFC ${\approx}11nm$ and on AC ${\approx}23nm$. This proved that heteroatomic functional groups in AFC, such as carboxyls, can provide ion-exchange or adsorption sites for the nano-scale dispersion of nickel. In addition, the pore structure, surface morphology, chemical composition, and chemical state of the prepared catalysts were analyzed using Brunauer-Emmett-Taylor (BET) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and temperature-programmed reduction (TPR).