• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.965-970
• /
• 1990

A nitrogenation of coal ash in the presence of carbon was carried out to examine the effects of reaction temperature, reaction time and carbon composition on the formation of AlN, SiC and Si3N4. Decreasing the particle size increased the formation of AlN and its maximum composition in the product was obtaiend under 1450~150$0^{\circ}C$, 2 hours of reaction time and about 30% of carbon addition(on the basis of sample weight). Compositions of SiC and Si3N4 were distributed to the opposite so that SiC showed a higher composition compared with Si3N4 at a lower temperature, a shorter reaction time and a greater carbon addition.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.209-211
• /
• 2015

Evaporation characteristics of a single droplet of carbon nanofluids were investigated in a rapid compression machine(RCM). n-Heptane and carbon black N990 were used to synthesize the carbon nanofluids. RCM is an experimental set-up to simulate a single compression stroke of reciprocating engine. Temperature and pressure in a reaction chamber were measured during the compression stroke. After the piston reaches top dead center(TDC), temperature and pressure decreased due to the heat loss at wall. In that process, a single droplet of carbon nanofluids underwent unsteady condition. A single droplet was put at the center of reaction chamber. Thermocouple whose tip is $50{\mu}m$ was used not only to measure transient bulk temperature, but also to suspend the droplet. The picture of single droplet was taken using high speed camera with a frame rate of 500 fps. From those pictures, the droplet diameter was measured by visual basic program.

• Carbon letters
• /
• 제19권
• /
• pp.23-31
• /
• 2016

Carbon rich fly ash was recently reported to have compositions that are ideal for use as a precursor and catalyst for carbon nanotube growth. This fly ash powder is mostly composed of pure carbon, predominantly present as sp². In this work, the effect of sonication time on the morphology and structural properties of carbon rich fly ash particles is reported. The obtained results show that ultrasound treatment is an effective tool for producing ultrafine particles/fragments with higher porosity, which might be suitable for the adsorption of gasses. Moreover, carbon nanoparticles (CNPs) of this fly ash were produced in parallel using the ball milling technique, and were evaluated as reinforcements for epoxy based composites. These CNPs have almost spherical shapes with particle sizes of around 30 nm. They were found to have strong C=O carbonyl group bonds, which might be generated during the ball milling process. The tensile testing results of a fly ash CNP reinforced epoxy composite showed significant improvements in the mechanical properties, mainly in the stiffness of the polymer. The stiffness value was increased by around 23% of that of neat epoxy. These CNPs with chemically active groups might also be useful for other applications.

• 한국환경보건학회지
• /
• 제23권4호
• /
• pp.91-96
• /
• 1997

In order to investigate the behavior of particulate carbon and benzo(a)pyrene(B(a)P) in the ambient air, suspended particle matters were collected from April, 1990 to February, 1992, and total carbon(TC), organic carbon(OC), elemental carbon(EC) and B(a)P were measured by an elemental analyzer and a HPLC. The results were as follows the average concentration of TC was 38.6 $\mug/m^3$ and its concentration was higher in winter(45.4 $\mug/m^3$) and fa11(44.3 $\mug/m^3$) than in summer(36.8 $\mug/m^3$) and spring(28.9 $\mug/m^3$). The monthly concentration trends both of EC and OC was similar, but seasonal variation of EC concentrations was larger than that of OC. The average concentration of B (a)P was 2.2 ng/m$^3$, and was higher in winter(4.1 ng/m$^3$) and fall(3.2 ng/m$^3$) than in spring(1.2 ng/m$^3$) and summer(0.6 ng/m$^3$). The seasonal behavior of carbon and B(a)P was to similar except for summer. The correlation coefficient(r) between EC and B(a)P was 0.71, and the correlation coefficient(r) between OC and B(a)P was 0.66.

• Ocean and Polar Research
• /
• 제44권1호
• /
• pp.99-111
• /
• 2022

Together with the development of measurement techniques, radiocarbon (¹⁴C) has been increasingly used as a key tool to investigate carbon cycling and associated biogeochemistry in the ocean. In this paper, the current status of radiocarbon studies in the East Sea (Japan Sea) is reviewed. Previously, spatiotemporal distribution and change of the water masses in the East Sea from 1979 to 1999 were investigated by using the ¹⁴C in the dissolved inorganic carbon (DIC). Researches on sinking particulate organic carbon (POC) revealed that POC in the deep ocean has more complex and heterogeneous origins than we expected. In particular, since 2011, Korean researchers have been collecting sinking particle samples for more than 10 years, so it is expected that ¹⁴C of POC will provide important information to understand carbon cycling in relation to climate change. Although the quantity of ¹⁴C data published in the East Sea is still limited, the importance and the future direction of using ¹⁴C to understand the biogeochemical mechanisms of carbon cycling and its role as a carbon reservoir in the East Sea are detailed herein.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.153-160
• /
• 2013

고무 혼합물의 가류특성 및 전자석 장치를 이용하여 범용고무를 기지로 하는 이방성 자기유동 고무 복합재료(MRRC)의 제조가 가능하였다. 철 입자(IP) 함유량의 증가에 따라 MRRC의 자기 투과율은 증가하였으며, 불규칙 배향에 비해 2 tesla로 배향시킨 경우가 1.8~2배 높게 나타났다. 2 tesla로 배향한 CNT만 강화한 MRRC의 자기 투과율은 3.7%로 자기장의 영향이 뚜렷이 확인되었다. IP 90 + CNT 5 & 2 tesla 배향의 MRRC는 압축시험 시 0.49 tesla의 자기장 하에서 압축응력이 기지에 비해 2.1배 증가하였다. IP 함유량 증가에 따라 자기유동(MR) 효과는 증가하였으며, IP 90 & 2 tesla 배향의 경우 20.4%의 MR 효과를 보였다. 시험편 제조 시 및 압축시험 시 부여한 자기력 세기가 MRRC의 압축특성에 미치는 영향이 크다고 판단된다.

• 한국입자에어로졸학회지
• /
• 제13권1호
• /
• pp.11-16
• /
• 2017

Indoor air quality is of increasing concern because it is closely related human health. An air handling unit (AHU) can be used to control the indoor air quality related to particulate matters and $CO_2$ as well as air conditioning such as temperature and humidity of indoor air. An electrostatic precipitator has a high collection efficiency and low pressure drop, however, ozone can possibly generate from its chargers, which is one of drawbacks to apply it for indoor air control. Here we compared four charging electrodes such as a $50{\mu}m$ tungsten wire, a $100{\mu}m$ tungsten wire, a $16{\mu}m$-thickness Al foil and a carbon fabric comprised of $5-10{\mu}m$ fibers. The carbon fabric electrode showed a superior particle collection efficiency and a lower ozone generation at a given power consumption compared to tungsten wires of 50, $100{\mu}m$ and an Al foil electrode. This low ozone generating, micro-sized electrode can be applied to the electrostatic precipitator in AHU for indoor air control.

• 조명전기설비학회논문지
• /
• 제19권4호
• /
• pp.24-31
• /
• 2005

고본 논문에서는 시뮬레이션 기법을 통하여 RAD법을 Ar 플라즈마 상태에서 구동하도록 설정하였다. 이것은 플라즈마를 구성하는 요소들이 PLAD법에 의해 방출된 각 입자들에 어떠한 영향을 미치는가를 확인하고자 하였으며, 특히 방출된 입자들의 운동 에너지 및 밀도를 제어할 수 있을 것으로 기대되어지기 때문이다. Ar 플라즈마의 방전 공간내에서, RAD법에 의한 전자, 탄소 이온$(C^+)$ 및 탄소 원자(C)의 운동 과정을 보다 정확히 계산하기 위해서 입자 및 유체 모델을 융합한 1차원 하이브리드 모델을 계발하였다. 그 결과 쉬스 내에 형성되는 전위를 제어함으로써 기판에 도달하는 $C^+$의 밀도 및 에너지를 제어할 수 있는 것으로 기대되어졌다.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1249-1258
• /
• 1994

Titanium carbide was synthesized by reacting the prepared titanium powder and carbon black using SHS method sustains the reaction spontaneously, utilizing heat generated by the exothermic reaction itself. In this process, the effect of the particle size of titanium powder on combustion temperature and combustion wave velocity was investigated. By controlling combustion temperature and combustion wave velocity via mixing Ti and C powder with TiC, the reaction kinetics of TiC formation by SHS method was considered. Without reference to the change of combustion temperature and combustion wave velocity, TiC was easily synthesized by combustion reaction. As the particle size of titanium powder was bigger, or, as the amount of added diluent(TiC) increased, combustion temperature and combustion wave velocity were found to be decreased. The formation of TiC by combustion reaction in the Ti-C system seems to occur via two different mechanisms. At the beginning of the reaction, when the combustion temperatures were higher than 2551 K, the reaction was considered to be controlled by the rate of dissolution of carbon into a titanium melt with an apparent activation energy of 148 kJ/mol. For combustion temperatures less than 2551 K, it was considered to be controlled by the atomic diffusion rate of carbon through a TiC layer with an apparent activation energy of 355 kJ/mol. The average particle size of the synthesized titanium carbide was smaller than that of the starting material(Ti).

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.453-458
• /
• 2020

In this study, ethylene-propylene-diene monomer (EPDM) rubbers reinforced with various particle size of carbon black were prepared and tested. We followed recently published CSA/ANSI CHMC2 standard "the test methods for evaluating material compatibility in compressed hydrogen applications-polyemr". Measurement of change in hardness, tensile strength and volume were performed after exposure to maximum operating pressure, 87.5 MPa, for 168 hours (1 week). Once EPDM was exposed to high-pressure hydrogen, the samples experience volume increase and degradation of the physical properties. Also, after the dissolved hydrogen was fully eliminated from the specimens, the hardness and the tensile properties were not recovered. The rubber reinforced with smaller sizes of carbon black particles showed less volume expansion and decrease of physical properties. As a result, smaller particle size of carbon black filler led to more resistance to high-pressure hydrogen.