Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Modeling of Carbon Plume in PLAD Method Assisted by Ar Plasmas

Ar 플라즈마 상태에서 PLAD법에 의한 탄소 입자의 운동 모델링

  • Published : 2005.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

A plused laser ablation deposition(PLAD) technique has been used for producing fine particle as well as thin film at relatively low substrate temperatures. However, in order to manufacture and evaluate such materials in detail, motions of plume particles generated by laser ablation have to be understood and interactions between the particles by ablation and gas plasma have to be clarified. Therefore this paper was focused on the understanding of plume motion in laser ablation assisted by hi plasmas at 100[mTorr]. One-dimensional hybrid model consisting of fluid and particle models was developed and three kinds of plume particles which are carbon atom(C), $ion(C^+)$ and electron were considered in the calculation of particle method. It was obtained that ablated $C^+$ was electrically captured in Ar plasmas by strong electric field(E). The difference between motions of the ablated electrons and $C^+$ made E strong and the collisional processes active. The energies of plume particles were investigated on a substrate surface. In addition the plume motion in Ar gas was also calculated and discussed.

고본 논문에서는 시뮬레이션 기법을 통하여 RAD법을 Ar 플라즈마 상태에서 구동하도록 설정하였다. 이것은 플라즈마를 구성하는 요소들이 PLAD법에 의해 방출된 각 입자들에 어떠한 영향을 미치는가를 확인하고자 하였으며, 특히 방출된 입자들의 운동 에너지 및 밀도를 제어할 수 있을 것으로 기대되어지기 때문이다. Ar 플라즈마의 방전 공간내에서, RAD법에 의한 전자, 탄소 이온$(C^+)$ 및 탄소 원자(C)의 운동 과정을 보다 정확히 계산하기 위해서 입자 및 유체 모델을 융합한 1차원 하이브리드 모델을 계발하였다. 그 결과 쉬스 내에 형성되는 전위를 제어함으로써 기판에 도달하는 $C^+$의 밀도 및 에너지를 제어할 수 있는 것으로 기대되어졌다.

Keywords

References

  1. Byeong-Yoon Lee, Ki-Dong Song, Jin-Kyo Chong and Kyong-Yop Park, 'Steady State Analysis of Nozzle Ablation Under High Temperature and High Pressure Arc Plasma', Trans. KIEE, Vol. 52C, No. 9, pp. 395-399, 2003
  2. Dong-Hee Rhie, 'Effects of Two-Step Annealing Process on the Pulsed Laser Ablated Lead Zirconate Titanate Thin Films', KIEE International Trans. on EA, Vol. 3-C, No. 2, pp. 43-47, 2003
  3. Suda Y, Nishimura T, Ono T, Akazawa M, Sakai Y and Homma N, 'Deposition of fine carbon particles using pulsed ArF laser ablation assisted by inductively coupled plasma', Thin Solid Films, Vol. 374, pp. 287-290, 2000 https://doi.org/10.1016/S0040-6090(00)01167-6
  4. Suda Y, Suganuma Y, Sakai Y, Suzuki K, Tsujino J and Homma N, 'Preparation of double layer film of boron and carbon by pulsed laser deposition', Appl. Surface Sci., Vol. 197-198, pp. 603-606, 2002 https://doi.org/10.1016/S0169-4332(02)00405-1
  5. D.B. Chrisey and G.K. Hubler, 'Pulsed Laser Deposition of thin film', Wiley-Interscience, 1994
  6. F. Kokai and Y. Koga, 'Time-of-flight mass spectrometric studies on the plume dynamics of laser ablation of graphite', Nucl. Instr. and Meth. in Phys. Res. B, Vol. 121, pp. 387-391, 1997 https://doi.org/10.1016/S0168-583X(96)00395-3
  7. Frederik Claeyssens, Robert J. Lade, Keith N. Rosser and Michael N.R. Ashfold, 'Investigations of the plume accompaying pulsed ultraviolet laser ablation of graphite in vaccum', J. Appl. Phys., Vol. 89, No. 1, pp. 697-709, 2001 https://doi.org/10.1063/1.1330548
  8. A.A. Voevodin and M.S. Donley, 'Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review', Surface and Coatings Technology, Vol. 82, pp. 199-213, 1996 https://doi.org/10.1016/0257-8972(95)02734-3
  9. Y Sakai, S Sawada and H Tagashira, 'Effect of Penning ionisation on an electron swarm in Ar/Ne mixtures: Boltzmann equation analysis', J. Phys. D., Vol. 19. No. 9, pp. 1741-1750, 1986 https://doi.org/10.1088/0022-3727/19/9/018
  10. Dougals H. Lowndes, Vladimir I. merkulov, A. A. Puretzky, D. B. Geohegan, G. E. Jellision, Jr., C. M. Rouleau and T. Thundat, 'Amorophous Diamond Films Deposited by Pulsed-laser Ablation: The Optimum Carbon-ion Kinetic Energy and Effects of Laser Wavelength', Mat. Res. Soc. Symp. Proc., Vol. 526, pp. 325-330, 1998
  11. Seung Min Park, Heebyung Chae, Sangwook Wee and Inhyung Lee, 'Anomalous enrichment of C2+ ions by laser ablation of graphite in Ar jet', J. Chem. Phys., Vol. 109, No. 3, pp. 928-931, 1998 https://doi.org/10.1063/1.476634
  12. D. H. Lowndes, V. I. Merkulov, A. A. Puretzky, D. B. Goehegan, G. E. Jellison, Jr., C. M. Rouleau and T. Thundat, 'Amorphous Diamond Films Deposited by Pulsed-Laser Ablation: The Optimum Carbon-Ion Kinetic Energy and Effects of Laser Wavelength', Mat. Res. Soc. Symp. Proc., Vol. 526, pp. 325-330, 1998
  13. S. Amorouso, R. Bruzzese, N. Spinelli and R. Velotta, 'Characterization of laser-ablation plasmas', J. Phys. B: AT. Mol. Opt. Phys., Vol. 32, pp. R131-R172, 1999 https://doi.org/10.1088/0953-4075/32/14/201