• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.123-130
• /
• 1993

Dispersed type Al2O3-SiC composite powders were synthesized from Al-isopropoxide (Al(i-OC3H7)3) and Si(OC2H5)4 precursors by hydrolysis of mixed alkoxides and carbothermal reaction method. The characteristics of the synthesized (dispersed type) Al2O3-SiC composite powders were investigated using XRD, SEM, TEM, BET and particle size analyzer. Carbothermal reaction to produce Al2O3-SiC composite was completed in 10h at 135$0^{\circ}C$ on 3~4㎤/s (0.21~0.28cm/s) of H2 flow rate and about 1/1 of carbon/oxides(=SiO2＋Al2O3) molar ratio. The synthesized powders were observed to have the mean particle size range of 0.4~1.26${\mu}{\textrm}{m}$ and showed finer particle size with increasing SiC content.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.143-146
• /
• 2002

Mg alloy is the lightest material of structural materials and is noticed for lightweight automotive parts because of excellent castability, superior ductility and damping capacity than Al alloy. But Mg Alloy is poor corrosion resistance and high temperature creep properties. In this study, Mg Matrix Composites were fabricated by squeeze casting method to improve high temperature creep properties and damping capacity. Hybrid Mg composites reinforced with Alborex, graphite particle, and SiCp was improved creep properties and damping capacity compared with Mg alloy. Compared to the length ($9\mu\textrm{m}, 27\mu\textrm{m}, 45\mu\textrm{m} etc.$), Hybrid Mg composites reinforced with SiCp, one of the most superior of the length and Alborex were more superior than those reinforced with graphite particle and Alborex in mechanical properties, creep characteristics, and damping capacity, etc.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.65-73
• /
• 2015

This paper presents a method of predicting the machining parameters on the turning process of low carbon steel using a neural network with back propagation (BP) and particle swarm optimization (PSO). Cutting speed, feed rate, and depth of cut are used as input variables, while surface roughness and electric current consumption are used as output variables. The data from experiments are used to train the neural network that uses BP and PSO to update the weights in the neural network. After training, the neural network model is run using test data, and the results using BP and PSO are compared with each other.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.42-50
• /
• 2001

The activity of immobilized cell-support particle aggregates is influenced by physical and biochemical elements, mass transfer, and physiology. Accordingly, the mathematical model discussed in this study is capable of predicting the steady state and transient concentration profiles of the cell mass and substrate, plus the effects of the substrate and product inhibition in an immobilized cell-support aggregate. The overall mathematical model is comprised of material balance equations for the cell mass, major carbon source, dissolved oxygen, and non-biomass products in a bulk suspension along with a single particle model. A smaller bead size and higher substrate concentration at the surface of the particle, resulted in a higher supply of the substrate into the aggregate and consequently a higher biocatalyst activity.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.185-192
• /
• 2002

A laboratory scale thermogravimetric analyser was developed to investigate the combustion characteristics of selected solid fuel(wood) in the highly preheated air. The aims are to introduce in the means of experimental determination of the solid fuel particle characteristics through the combustion process in the environment of highly preheated air. A nearly single particle combustion condition was reproduced in a thermogravimetric analyser and regenerating combustor. For a fuel particle whose characteristic length was a few centimeter, the sub-processes of fuel drying, pyrolysis as well as the combustion of residual carbon were identified. Fluidized environment of carrier gas was selected as the major parameter which affect the combustion process.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.62-68
• /
• 1996

In order to establish making process of water atomized iron powder for powder metallurgy, effect of heat treatment condition on change of powder properties and impurities was investigated at each tempeature of $850{\sim}950^{\circ}C$. The results are as follows. Particle morphology of iron powder changed slightly from sphercial type to irregular type and the amount of fine particle decreased more and more with increasing of heat treatment time at each temperature. The flow rate and apparent desity of iron powder also decreased due to particle coalescence in order of $850^{\circ}C$, $950^{\circ}C$, $900^{\circ}C$. Those powder Properties became to decrease particularly at $900^{\circ}C$ in alpha iron region. On the other hand, residual carbon and oxygen contents in iron powder decreased extremely with increasing of heat treatment temperature and time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.86-92
• /
• 2009

We fabricated the charged particle type display using opposite-charged two toner particles. The particles were composed of polymer, colorant($TiO_2$, carbon black) and external additives(nano-sized silica and so on). In fabrication process we controlled the putting layers of this toner particles on the inner panel. To get the effect of number of layers ($1{\sim}3$), we measured the threshold, driving and breakdown voltages, reflectivity, viewing angle, and color characteristics using RT-300 anisotropic scattering system. We ascertained that these voltages are increased with increasing of layers of particles. Cell gap between electrodes must be enlarged with increment of layers and the size of particles. The lumping phenomena of particles at near of the rib observed by optical system with same CIE values.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.91-95
• /
• 2011

Ni-CNT(carbon nanotubes) composite coating is often used for the surface treatment of electronic/mechanical devices to improve the properties of the exisiting Ni electroplating. For this, the dispersion of CNT particle is a critical process. In this study, ball milling and additive called sodium dodecyl sulfate(SDS) are employed for dispersion. Electroplated Ni-CNT films were examined by SEM-EDX, AES, microhardness tester, 4-point probe and contact angle measurement to find the optimum dispersion conditions. Ni-CNT coatings formed by ball milling for 9 hrs and with addition of SDS 12 times of CNT contents showed the highest hardness, reasonable resistivity and non-stick characteristics.

• Elastomers and Composites
• /
• v.56 no.1
• /
• pp.1-5
• /
• 2021

Tire and road wear particles (TRWPs) were collected from road dust and thermogravimetric analysis (TGA) was performed to measure the content of tire wear particles (TWPs) in the TRWPs. The TGA thermograms of TRWPs showed two weight loss steps associated with polymer decomposition including weight loss after 480℃ which may be due to road wear particles. Different samples gave different TGA thermograms because the types and contents of the road wear particles attached to the TWPs should be different from each other, and each TWP might have different composition. The TGA results of the model asphalt pavement wear particles, with (volatile organics + polymers + carbon black) : ash = 33.5 : 66.5, was applied to the TRWP results, and the TWP contents of TRWPs were found to be 50-65%. The zinc oxide content in the rubber compound was negligible.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.331-334
• /
• 2010

In the present study, carbon supports mixed with purified multi-walled carbon nanotubes (MWNTs) and carbon blacks (CBs) were used to improve the cell performance of direct methanol fuel cells (DMFCs). Additionally, the effect of $O_2$ plasma treatment on CBs/MWNTs supports was investigated for different plasma RF powers of 100, 200, and 300 W. The surface and structural properties of the CBs/MWNTs supports were characterized by FT-IR, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and inductive coupled plasma-mass spectrometer (ICP-MS). The electrocatalytic activity of PtRu/CBs/MWNTs catalysts was investigated by cyclic voltammetry measurement. In the experimental results, the oxygen functional groups of the supports were increased with increasing plasma RF power, while the average Pt particle size was decreased owing to the improvement of dispersibility of the catalysts. The electrochemical activity of the catalysts for methanol oxidation was gradually improved by the larger available active surface area, itself due to the introduction of oxygen functional groups. Consequently, it was found that $O_2$ plasma treatments could influence the surface properties of the carbon supports, resulting in enhanced electrocatalytic activity of the catalysts for DMFCs.