• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제12회 학술발표회 논문개요집
• /
• pp.128-128
• /
• 1997

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제10회 학술발표회 논문개요집
• /
• pp.56-56
• /
• 1996

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.12-12
• /
• 1998

• Composites Research
• /
• 제33권3호
• /
• pp.153-160
• /
• 2020

질화붕소(BN)는 높은 열전도도를 가지는 2D 형상의 부도체로 복합재료의 강화 필러로 연구되고 있는 물질이다. 본 연구에서는 판상의 육방정 질화붕소(h-BN)를 탄소섬유 다발 사이에 첨가하여 BN이 함유된 탄소섬유강화 복합소재(CFRPs)를 제조하여 BN 필러가 CFRP의 여러 물성에 어떤 영향을 주는지 탐구하였다. 사용된 프리프레그의 수지 총량의 0-15 wt%의 BN 필러가 프리프레그 층 사이에 첨가되었다. BN 필러가 첨가된 복합소재의 인장강도는 최대 13.6%, 계면간 전단응력은 최대 6.7% 증가하는 것을 관찰하였다. BN 첨가량에 따른 열전도도와 전기전도도의 변화와, BN의 첨가량에 따른 시편의 단면 형상 변화 또한 관찰되어 탄소섬유-BN-에폭시 복합소재의 물성 제어 가능성을 제시하였다.

• Steel and Composite Structures
• /
• 제23권2호
• /
• pp.153-160
• /
• 2017

It is extremely important to be aware of the ballistic performances of engineering materials in order to be able to choose the lightest armor providing full ballistic protection in civil and military applications. Therefore, ballistic tests are an important part of armor design process. In this study, ballistic performance of plates made of carbon steel and cold worked tool steel against 7.62 mm AP (armor-piercing) bullets was examined experimentally and numerically in accordance with NIJ standards. Samples in different sizes were prepared to demonstrate the effect of target thickness on ballistic performance. Some of these samples were coated with titanium nitride using physical vapor deposition (PVD) method. After examining all successful and unsuccessful samples at macro and micro levels, factors affecting ballistic performance were determined. Explicit non-linear analyses were made using Ls-Dyna software in order to confirm physical ballistic test results. It was observed that the ballistic features of steel plates used in simulations comply with actual physical test results.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3258-3264
• /
• 2012

Aluminum oxide ($Al_2O_3$) nanofibers were treated thermally under an ammonia ($NH_3$) gas stream balanced by nitrogen to form a thin aluminum nitride (AlN) layer on the nanofibers, resulting in the enhancement of thermal conductivity of $Al_2O_3$/epoxy nanocomposites. The micro-structural and morphological properties of the $NH_3$-assisted thermally-treated $Al_2O_3$ nanofibers were characterized by X-ray diffraction (XRD) and atomic force microscopy (AEM), respectively. The surface characteristics and pore structures were observed by X-ray photoelectron spectroscopy (XPS), Zeta-potential and $N_2$/77 K isothermal adsorptions. From the results, the formation of AlN on $Al_2O_3$ nanofibers was confirmed by XRD and XPS. The thermal conductivity (TC) of the modified $Al_2O_3$ nanofibers/epoxy composites increased with increasing treated temperatures. On the other hand, the severely treated $Al_2O_3$/epoxy composites showed a decrease in TC, resulting from a decrease in the probability of heat-transfer networks between the filler and matrix in this system due to the aggregation of nanofiber fillers.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.561-569
• /
• 1988

Mixtures of very small amounts of additive, carbon and silica(about 0.46${\mu}{\textrm}{m}$) which synthesized by the hydrolysis of ethyl silicate, the molar ratio of SiO2/C was fixed to 1/10, was nitrided at 145$0^{\circ}C$. It was considered that the optimum amount of additive to promote the nitridation reaction was below 2.0wt%. By the addition of additive, the nitridation reaction was promoted and formation of $\beta$-Si3N4 was promoted at 145$0^{\circ}C$ for 1hour, but, the nitridation reaction was decreased and the ratio of $\alpha$/$\beta$ of Si3N4, was increased at 145$0^{\circ}C$ for 5 hours. The crystal phase was $\alpha$ phase and the nitridation reaction was promoted and the particle size of silicon nitride was become smaller by the addition of $\alpha$-Si3N4, but silicon nitride of whisker-like form was produced by the addition of transition elements. There was a difference in the lattice constants of $\alpha$-Si3N4, but no difference in its of $\beta$-Si3N4 according to kinds of added substance and reaction time.

• 한국진공학회지
• /
• 제7권3호
• /
• pp.242-247
• /
• 1998

DC saddle-field-plasma-enhanced chemical-vapor deposition(PECVD) 장치를 이용 하여 상온에서 p-type Si(100)기판위에 hydrogenated amorphous carbon nitride [a-C:H(N)] 박막을 증착하였다. 원료가스인 $CH_4$과 $N_2$의 전체압력은 90mTorr로 고정하고 $N_2/CH_4$비를 0 에서 4까지 변화하면서 제작한 a-C:H(N)박막의 미세구조의 변화를 연구하였다. 진공조의 도달 진공도는 $1\times10^{-6}$Torr이고, 본 실험시 $N_2+CH_4$가스의 유량은 5sccm으로 고정하고 배 기량을 조절하여 진공조의 가스 압력을 90mTorr로 고정하였으며 기판에 200V의 직류 bias 전압을 인가하였다. $\alpha$-step과 X-ray photoelectron spectroscopy(XPS)를 이용한 분석결과 $N_2/CH_4$비가 0에서 0.5로 증가함에 따라 박막 두께는 4840$\AA$에서 2600$\AA$으로 급격히 감소하 였으며, 박막내의 탄소에 대한 질소함유량(N/C비)는 N2/CH4비가 4일 때 최대 0.25로 증가하 는 것을 확인하였다. 또한 XPS 스펙트럼의 fitting 결과 $N_2/CH_4$비가 증가할수록 CN결합이 증가하였다. Fourier Transformation Infrared(FT-IR) 분석결과 $N_2/CH_4$비가 증가함에 따라 박막내의 C-H결합은 감소하고, N-H, C≡N결합은 증가하였다. Optical bandgap 측정 결과 $N_2/CH_4$비가 0에서 4로 증가함에 따라 a-C:H(N)박막의 bandgap 에너지는 2.53eV에서 2.3eV 로 감소하는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1579-1582
• /
• 2011

Alumina particles wrapped in few-layer graphene sheets were prepared by calcining aluminum nitride powders under a mixed gas flow of carbon monoxide and argon. The graphene sheets were characterized by powder X-ray diffraction (XRD), Raman spectroscopy, electron energy loss spectroscopy, and high-resolution transmission electron microscopy. The few-layer graphene sheets, which wrapped around the alumina particles, did not exhibit any diffraction peaks in the XRD patterns but did show three characteristic bands (D, G, and 2D bands) in the Raman spectra. The dye-sensitized solar cell (DSSC) with the alumina particles wrapped in few-layer graphene sheets exhibited significantly improved overall energy-conversion efficiency, compared to conventional DSSC, due to longer electron lifetime.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.147-154
• /
• 1987

Silicon nitride powders were prepared by the simultaneous reduction and nitridation from powder mixtures of Kim cheon quartzite and carbon (graphite or carbon black) at1400$^{\circ}C$ for 10 hours in nitrogen atmosphere. The effects of the reaction variables on the yield of products and on the ${\alpha}$/${\beta}$ ratio were examined. The average particle size, density, and the ${\alpha}$/${\beta}$ ratio of the obtained si3N4 were 1.0$\mu\textrm{m}$, 3.10g/㎤ and 90/10, respectively. It was found that the Si3N4 powders obtained in this work were comparable to the foreign commercial products.