• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.3
• /
• pp.17-28
• /
• 2022

We evaluated the effect of CO₂ offsetting by estimating changes in carbon uptake under various forest management scenarios and proposed forest management strategies to achieve carbon neutrality. Paju and Goseong, which have relatively large forest areas but different industrial characteristics, were selected for the study sites. The current state of forest distribution was analyzed using forest type maps and aerial photographs, and the amount of carbon uptake was calculated using the equation presented by the IPCC Guidelines for National Greenhouse Gas Inventories and the national emission/absorption coefficients from the Korea National Greenhouse Gas Inventory Report. As of 2015, the forest carbon absorption in Paju and Goseong was 49,931 t/yr and 94,225 t/yr, respectively, and the annual carbon absorption per unit area was 2.28 t/ha/yr and 2.16 t/ha/yr. Under the forest management scenarios, the annual maximum carbon absorption per unit area is estimated to increase to 5.68 t/ha/yr in Paju and 4.22 t/ha/yr in Goseong, and this absorption would increase further if urban forests were additionally created. Even if the current forests of Paju and Goseong are maintained as they are, emissions from electricity use can be sufficiently offset. However, by applying appropriate forest management strategies, emissions from sectors other than electricity use could be offset. This study can be applied to the establishment of carbon absorption strategies in the forest sector to achieve carbon neutrality.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.55-62
• /
• 2011

Amidst the raising of climate change in relation to the earth's environment as an international issue, there is a growing interest in forest resources. In particular, Korea faces a period in which we need to control carbon release pursuant to the Convention on Climate Change and the enforcement of the Kyoto Protocol; therefore, the importance of forests is becoming greater. Recently, there has been a focus on light detection and ranging (Lidar) which is a means of acquiring in a short time various necessary pieces of information for forest management as three dimensional geospatial information. In this study, the carbon absorption of a forest was measured by using the Lidar data obtained from the Lidar. Carbon absorption release was calculated on the basis of three criteria involving the minimum height of a tree, the density of the forest, and the minimum area of the forest, which are items proposed by the Forest resources surveyor. Through this study, a method of extracting the carbon absorption of a forest area using the Lidar data quantitatively was confirmed.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.647-657
• /
• 2023

The study analyzes the forest status of each local government for Korean forests and believes that it can be used as basic data for setting the direction pursued by each local government. The study took into account the fact that the forest rate in Korea was 63.5%, because it was judged that the higher the proportion of forest area, the more important it was to use the characteristics of forests. The characteristics of forests were analyzed based on four factors in 12 factors to identify the location of the ground body by dividing seven types. In addition, basic information on carbon absorption sources was provided by grasping the ability of carbon absorption sources per year through the amount of forest resources to be analyzed. In addition, as a result of analyzing the characteristics of the weather for the promotion of carbon absorption sources, the flat area on the side of Gangneung Mountain was a warm forest with a warm index of 106.0.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.4
• /
• pp.231-240
• /
• 2017

This paper aims to study a method to estimate precise carbon absorption by quantification of forest information that uses accurate LiDAR data, hyperspectral image. To estimate precise carbon absorption value by using spatial data, a problem was found out of carbon absorption value estimation method with statistical method, which is already existed method, and then offered optimized carbon absorption estimation method with spatial information by analyzing with methods of compare digital aerial photogrammetry and LiDAR data. It turned out possible Precise classification and quantification in case of using LiDAR and hyperspectral image. Various classification of tree species was possible with use of LiDAR and hyperspectral image. Classification of hyperspectral image was matched in general with field survey and Mahalanobis distance classification method. Precise forest resources could be extracted using high density LiDAR data. Compared with existing method, 19.7% in forest area, 19.2% in total carbon absorption, 0.9% in absorption per unit area of difference created, and improvement was found out to be estimated precisely in international code.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.3
• /
• pp.39-45
• /
• 2010

Quantification of carbon absorption and understanding the human induced land use changes (LUC) forms one of the major study with respect to global climatic changes. An attempt study has been made to quantify the carbon absorption by LUC through remote sensing technology. The Landsat imagery four time periods was classified with the hybrid classification method in order to quantify carbon absorption by LUC. Thereafter, for estimating the amount of carbon absorption, the stand biomass of forest was estimated with the total weight, which was the sum of individual tree weight. Individual tree volumes could be estimated with the crown width extracted from digital forest cover type map. In particular, the carbon conversion index and the ratio of the $CO_2$ molecular weight to the C atomic weight, reported in the IPCC guideline, was used to convert the stand biomass into the amount of carbon absorption. Total carbon absorption has been modeled by taking areal estimates of LUC of four time periods and carbon factors for land use type and standing biomass. Results of this study, through LUC suggests that over a period of construction, 7.10 % of forest and 9.43 % of barren were converted into urban. In the conversion process, there has been a loss of 6.66 t/ha/y (7.94 %) of carbon absorption from the study area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.29-35
• /
• 2013

Generally, Calculation of carbon dioxide absorption in the forest area is calculated using the information of the forest, such as tree height and DBH(Diameter of Breast Height). Tree height and DBH of these are obtained using the remote sensing data such as imagery and information of local forest survey. However, Mixed forest with a high proportion of field survey to lower the accuracy of forest information. In this study, vertical structure of the tree were identified by applying region growing method based on the slope using LiDAR data and height and number of the tree were identified by applying extracting top of the tree algorithm. Through the vertex tree extraction algorithm to identify height of tree and the number of individuals, substitute this for the DBH relation formula which is drawn from data through field surveys. In this, a quantitative calculation of carbon dioxide absorption were able to calculate the basic data. Also, carbon dioxide absorption of three type trees were calculated and average per unit area of carbon dioxide absorption were able to estimate.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.42-48
• /
• 2006

This study looked into the change of tree growth of five forest growth monitoring plots which were set up at the Undulyeong Hongchungun Kangwondo, and was accomplished to provide the basic data for the forest management calculating carbon storage and absorption in the Undulyeong area. Annual height and DBH growth were slowly progressed in the Pinus koraiensis, Larix kaempferi, and Pinus densiflora stand which were at young stage, but the growth rates of the other stands were lower than those young stands. The diameter class of the mixed forest and Quercus mongolica and Betala platyphylla stand was predicted to be similar as it is and those of Pinus koraiensis and Larix kaempferi stands were predicted to move to the upper diameter classes because of rapid growth rates of the those stands. As in the year 2005, total carbon storage of the Undulyeong model forest was increased by 155,000 TC(2.7%) compared with the previous year. During 2005, total carbon which was absorbed and stored according to growth of the forest was 166,174 TC and net carbon absorption (155,481 TC) increased by 2,736 TC (1.8%) compared with the previous year. Resultingly, the Undulyeong model forest is acting as a net sink and the net carbon absorption rate is slightly increasing recently.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.951-962
• /
• 2020

One hundred ninety-five countries reached agreement on a new climate treaty in Paris, France to reduce the carbon emissions. South Korea has been selected as a target country for reducing greenhouse gas (GHG) obligations since 2020. In this context, the Korean government developed several GHG emissions reduction programs using forests called the "Forest carbon offset scheme (FCOS)." The forest management method is one of the tools to implement FCOS. Most of the participants registered forest management as the preferred methodology to participate in the FCOS. For a successful implementation of the FCOS, it is necessary to explore the optimal methods by considering the cost-effective aspect of conducting the forest management as a tool to increase carbon absorption. In this context, this study investigated the value optimized FCOS projects based on the forest management methodology in South Korea. Three forest management scenarios, 1) extending the final age of maturity of Pinus densiflora stands (S1), 2) extending the final age of maturity of Quercus acutissima stands (S2), and 3) reforestation with new species (Pinus densiflora to Quercus acutissima) (S3), were examined and evaluated to identify the optimal carbon absorption and value optimized economic perspective. The results of the scenario-based modelling indicated that S3 showed value optimized from an economical perspective, and S2 was the most effective method to absorb carbon among the scenarios. It is anticipated that this paper will contribute to provide valuable information by presenting innovative approaches as a value optimized FCOS implementing tool in a GHG reduction program in South Korea.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.2
• /
• pp.121-128
• /
• 2013

The greenhouse gas emission according to the energy consumption is the cause of global warming. With various climates, it is occurs the direct problems to ecosystem. The various studies are being to reduce the carbon dioxide, which accounts for more than 80% of the total greenhouse gas emissions. In this study, estimate the carbon usage using potential biomass extracted from forest type map according to land-use by satellite image, and estimate the amount of carbon dioxide, according to the energy consumption of urban area. The $CO_2$ adsorption is extracted by the amount of forest based on the direct absorption of tree, the other used investigated value. The $CO_2$ emission in Jecheon was 3,985,900 $TCO_2$ by energy consumption. At the land cover classification, the forest is analyzed as 624,085ha and the farmland is 148,700ha. The carbon dioxide absorption was estimated at 1,834,850 Tons from analyzed forest. In case of farmland, it was also estimated at 706,658 Tons.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.118-133
• /
• 2024

The sapwood portion of fast-growing teak is mostly ignored due to its inferior quality. One of the possibilities for utilizing sapwood waste is to convert it into activated carbon that has good adsorption capabilities. The raw materials used in this research were sapwood of 14-year-old fast-growing teak sapwood (FTS) waste, which was taken from three trees from community forests in Wonosari, Gunungkidul, Yogyakarta Special Region. FTS waste was taken from the bottom of the tree up to a height of 1.3 m. The activation process is conducted with an activation temperature of 750℃, 850℃, and 950℃. The heating duration consists of three variations: 30 min, 60 min, and 90 min. The quality evaluation parameters of activated carbon include yield, moisture content, volatile matter content, ash content, fixed carbon content, adsorption capacity of benzene, adsorption capacity of methylene blue, and adsorption capacity of iodine. The results showed that the activated carbon produced had the following quality parameters: yield of 75.61%; moisture content of 1.27%; volatile matter content of 9.98%; ash content of 5.43%; fixed carbon content of 84.58%; benzene absorption capacity of 8.58%; methylene blue absorption capacity of 87.73 mg/g; and iodine adsorption capacity of 948.19 mg/g. It can be concluded that activated carbon from FTS waste has good iodine adsorption, which fulfilled the SNI 06-3730-1995 quality standard. Due to the iodine adsorption ability of FTS waste activated carbon, the conversion of FTS waste to activated carbon is categorized as a potential method to increase the value of this material.