• Composites Research
• /
• 제28권6호
• /
• pp.356-360
• /
• 2015

본 논문에서는 복합재료 접합부의 파손거동 예측을 위해 CFRP를 DCB 형태로 가공하여 Mode 1 정적해석을 수행하였다. 시편은 각각 25 mm, 30 mm, 35 mm, 40 mm의 4가지 경우로, 방향성을 지니지 않은 탄소섬유의 물성치를 이용하였다. Model 1 해석을 통해 나온 결론으로는 25 mm에서 낮은 힘으로 가장 늦게 접착부에서 떨어지는 것을 볼 수 있었으며 40 mm에서 가장 높은 힘이 발생하였다. 접합부의 접착계면 탈락은 25 mm의 시험편 두께에서 9.75 mm로 가장 느리게 나타났으며 40 mm의 시험편 두께에서 7.82 mm로 가장 빠르게 나타난 것을 볼 수 있었다. 이 탈락은 시험편의 파괴에 의한 것이다. 접착계면의 탈락과 이에 따른 반력에 관한 본 연구 결과는 CFRP의 안전한 구조설계에 이바지할 수 있을 것으로 사료된다.

• Carbon letters
• /
• 제23권
• /
• pp.1-8
• /
• 2017

Polycrystalline diamond (PCD) tools possessing high hardness and abrasive wear resistance are particularly suited for drilling of carbon fiber reinforced plastic (CFRP) composites, where tool life and consistent hole quality are important. While PCD presents superior performance when drilling CFRP, it is unclear how it performs when drilling multi-stack materials such as CFRP-titanium (Ti) stacks. This comparative study aims to investigate drilling of a Ti plate stacked on a CFRP panel when using PCD tools. The first sequence of the drilling experiments was to drill 20 holes in CFRP only. CFRP-Ti stacks were then drilled for the next 20 holes with the same drill bit. CFRP holes and CFRP-Ti stack holes were evaluated in terms of machined hole quality. The main tool wear mechanism of PCD drills is micro-fractures that occur when machining the Ti plate of the stack. Tool wear increases the instability and the operation temperature when machining the Ti plate. This results in high drilling forces, large hole diameter errors, high surface roughness, wider CFRP exit thermal damage, and taller exit Ti burrs.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.251-260
• /
• 2001

단조인장시험하에서 CFRP적층재의 손상과정을 음향방출과 초음파시험에 의해 평가하였다. 시험편으로부터의 음항방출신호의 진폭 분포는 기지재 균열(matrix crack), 박리(debonding), 섬유 pull-out 및 섬유 과단(fiber fracture)과 같은 CFRP에서의 파괴기구를 분석하는데 도움을 주며, 초음파 진폭감쇠의 특성 또한 각각의 파괴기구를 분석하는데 유용하다. 여러종류의 CFRP시험편을 사용하여 음향방출신호와 초음파신호의 진폭감쇠를 조사하였다. 끝으로 하중 제하중(loading-unloading) 시험이 초음파내의 진폭비에 대한 Felicity effect와 감쇠를 조사하기 위해서 수행되었다. 전 실험에 걸쳐 초음파신호의 진폭감쇠와 음향방출 파라미터(parameter)들은 동시에 검출되었다. 이로써 음향방출과 초음파시험의 두 파라미터들이 CERP에서의 파괴기구를 분석하기 위해 효과적으로 사용될 수 있음이 확인되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.38-38
• /
• 2000

저온유지장치에서 요구되는 도달압력은 초전도 코일의 냉각시스템과 저온유지장치의 벽 사이의 진공단열조건으로부터 결정될 수 있으며, 기체에 의한 열전도의 영향을 방지하기 위해서는 5$\times$105Torr 이하의 진공도가 요구된다. 저온유지장치 내에서 진공 단열재로 사용되는 Glass Fiber Reinforced Plastic(GFRP)과 Carbon Fiber Reinforced Plastic(CFRP)의 기체 방출률을 측정하였다. 고출력 토카막 방전동안 graphite limiter 표면의 온도는 200$0^{\circ}C$ 이상이며, 플라즈마로 유입되는 불순물의 양을 줄이기 위해 많은 시도를 하고 있다. 상온에서부터 약 100$0^{\circ}C$까지 승온에 따른 방출기체의 양 및 성분 분석, annealing 후 공기 중에 약 2주간 노출 후 기체 방출률과 성분을 분석하였다. 총 기체 방출량은 10$0^{\circ}C$ 근방에서 급격히 증가하여 $600^{\circ}C$부터는 graphite의 종류에 관계없이 거의 일정한 분포를 보이며, 최대 방출률은 약 20$0^{\circ}C$~30$0^{\circ}C$ 부근에서 나타났다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.50-56
• /
• 2005

Aluminum member absorbs energy by stable plastic deformation under axial loading. While CFRP(Carbon Fiber Reinforced Plastics) member absorbs energy by unstable brittle failure but its specific strength and stiffness is higher than those of aluminum member. In this study, for complement of detects and synergy effect by combination with the advantages of each member, the axial collapse tests were performed for aluminum CFRP members which are composed of aluminum members wrapped with CFRP outside aluminum circular members. Based on the respective collapse characteristics of aluminum and CFRP members, crushing behavior and energy absorption characteristics were analyzed for aluminum CRRP members which have different CFRP fiber orientation angle and thickness Test results showed that aluminum CFRP members supplemented the unstable brittle failure of CFRP members due to ductile nature of inner aluminum members. It turned out that the CFRP fiber orientation angle and thickness influence energy absorption capability together with the collapse mode of the members.

• Structural Engineering and Mechanics
• /
• 제18권1호
• /
• pp.21-40
• /
• 2004

In this paper, we modify the L-L model (Li et al. 2003) and extend the application of this model to concrete confined by both steel reinforcement and CFRP. Thirty-six concrete cylinders with a dimension of ${\varphi}30{\times}60$ cm were tested to verify the effectiveness of the proposed model. The experimental test results show that different types of steel reinforcement have a great effect on the compressive strength of concrete cylinders confined by steel reinforcement, but the different types of steel reinforcement have very little effect on concrete cylinders confined by both steel reinforcement and CFRP. Compared with the stress-strain curves of confined concrete cylinders, we can conclude that the proposed model can provide more effective prediction than others models.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.536-539
• /
• 2004

This paper focues on the flexural behavior of RC beams externally reinforced using Carbon Fiber Reinforced Plastics plates. (CFRP) A non-linear finite element (FE) analysis is proposed in order to complete the experimental analysis of the flexural behaviour of the beams. This paper is a part of a complete program aiming to set up design formulate to predict the strength of CFRP strengthende beams, particularly when premature failure through plates-end shear or concrete cover delamination occurs. An elasto-plastic behaviour is assumed for reinforced concrete and interface elements are used to model the bond and slip.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.39-45
• /
• 2001

신호처리법으로 현재 많이 사용되고 있는 푸리에 변환은 신호의 주파수 성분이 시간에 따라 어떻게 변화하는지를 표현하지 못한다. 따라서 최근 이와 같은 푸리에 변환의 단점을 보완하여, 신호의 시간과 주파수에 대한 정보를 동시에 표현할 수 있는 시간-주파수 해석법들이 개발되었다. 본 연구에서는 음향방출을 이용하여 복합재료의 주요 발생원으로 알려져 있는 기지균열, 섬유분리, 섬유파괴 덴 층간분리 등과 같은 파괴기구를 해석하였다. 각각의 파괴특성이 나타나도록 시험편을 제작하여 인장시험 시 검출된 음향방출신호의 시간-주파수 해석을 통해 전체 파괴기구의 특징을 분석하였다.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.102-108
• /
• 2010

Recently, carbon fiber reinforced plastic(CFRP) composite materials have been widely used in various fields of engineering because of its advanced properties. Also, CFRP composite materials offer new design flexibilities, corrosion and wear resistance, low thermal conductivity and increased fatigue life. However CFRP composite materials are susceptible to impact damage due to their lack of through-thickness reinforcement and it causes large drops in the load-carrying capacity of a structure. Therefore, the impact damage behavior and subsequently load-carrying capacity of impacted composite materials deserve careful investigation. In this study, the residual strength and impact characteristics of plain-woven CFRP composites with impact damage are investigated under axial tensile test. By using obtained residual strength and Tan-Cheng failure criterion, residual strength of CFRP laminate with arbitrary fiber angle were evaluated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.160-166
• /
• 1994

In general, the problems of strengthening and repairing of deteriorated or damaged reinforced concrete members are usually worked out in situ by externally bounding steel plates using epoxy resins, which has been recognized to be one of effective and convenient methods. But the disadvantages of strengthening/repairing concrete members with externally bonded steel plates include ; (a) deterioration of the bond at the steel-concrete interface caused by the corrosion of steel ; (b) difficulty in manipulating the plate at the construction site ; (c) improper formation of joints, due to the limited delivery lengths of the steel plates ; and etc. Therefore these difficulties eventually have led to the concept of replacing the steel plates by fiber-reinforced composite sheets which are characterized by their light weight, extremely high stiffness, excellent fatigue properties, and outstanding corrosion resistance. In the paper, for the reliability assessment of reinforced concrete beams externally strengthened by carbon fiber plastic(CFRP) laminates, an attempt is made to suggest a limit state model based on the strain compatibility method and the concept of fracture mechanics. And the reliability of the proposed models is evaluated by using the AFOSM method. The load carrying capacity of the deteriorated and/or damaged RC beams is considerably increased. Thus, it may be stated that the post-strengthening of concrete beams with externally bonded CFRP materials may be one of very effective way of increasing the load carrying capacity and stiffeness characteristics of existing structures.