• Applied Microscopy
• /
• v.10 no.1_2
• /
• pp.7-17
• /
• 1980

Electron microscope radioautography introduced by Liquier-Milward (1956) is now used routinely in many laboratories. Most of the technical difficulties in specimen preparation have been overcome. This method is modified from loop method for improvement of EM radioautographic techniques. The advantages of this method are: 1. the use of single specimens on small corks and of a large wire loop, allows the experimenter to avoid the blemishes in the membrane; 2. the surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4, thus greatly prolonging the period of time over which good emulsion layers can be made; 3. corks can be handled in perspex holder which allows about 20 specimens to be developed simultaneously. The steps of the method comprise: 1. Cut ribbons of ultrathin sections of silver interference colour 2. Pick them up on formvar-coated 200 mesh grids 3. Prestaining of tissues 4. Coat the specimens with a thin layer of carbon by evaporation (30-60A) 5. Mount the specimens on corks (about 1cm apical diameter) using double-sided scotch tape 6. Emulsion coating; a. Take a 250m1 beaker, place it on the pan of a sliding weight balance and weigh it. Add 10 grams extra to the beam. Add pieces of ILford L4 emulsion to the beaker until the balance is swinging freely. Add the 20ml of distilled water that was previously measured out. b. Surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4. 7. Prepare a series of membranes of gelled emulsion with the wire loop and apply one to each cork-borne specimen. 8. Put the specimens away to expose by pushing the corks into short length of PVC tubing, each tube having a small hole in the side 9. Place the tubes in small boxes together with silica gel. 10. Exposure 11. Developer - Kodak Microdol X for 3 minutes 12. Fixer - A perspex holder can be manufactured which allows 20 specimens to be developed simultaneously. 12. Fixer - 30% sodium thiosulfate for 10 minutes 13. Examination with Siemens Elmiskop 1A electron microscope

• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1601-1608
• /
• 2015

This study evaluates heavy metal(Cu and Cr) adsorption characteristics produced from food waste charcoal extracted in an optimal operation condition after analyzing activated charcoal of iodine adsorption and heavy metals that derived from an activation process of carbide by the developed by-products of food waste treatment facility using the methods from previous studies. As experiment apparatus, this study used a tube-shaped high temp furnace. The mixing ratio of by-products of food waste treatment facility, carbide, and activation component($ZnCl_2$) was 1:1. The experiment was proceeded as adjusting the activation temperature from 400 to $800^{\circ}C$ and activation time from 30 to 120 minutes. The optimal activation condition for iodine absorption was 90 minutes at $700^{\circ}C$ and by using the produced food waste charcoal, this study conducted an experiment on absorption of heavy metals (Cu and Cr) as changing pH of artificial wastewater and stirring time. As a result, pH 7 showed the highest heavy metal decontamination ratio and in terms of stirring time, it revealed balance adsorption after 10 minutes. This result can be particularly applied as basic data for recyclability of high concentration organic waste, by-products of food waste treatment facility, as an food waste charcoal.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.33-36
• /
• 2008

The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.6
• /
• pp.503-511
• /
• 2009

VOC mixture was fed to a trickle bed air biofilter (TBAB) with step-change in influent mixture concentrations from 50 ppmv to 1,000 ppmv, corresponding to loadings of $5.7\;g/m^3/hr$ to $114.1\;g/m^3/hr$. VOC mixture was an equimolar ratio of two aromatic VOCs, i.e., toluene and styrene, and two oxygenated VOCs, i.e., methyl ethyl ketone (MEK) and methyl isobutyl ketone (MIBK). The TBAB system employed backwashing as biomass control. The experimental results showed that a critical loading rate for VOC mixture removal was determined to be about $60\;g/m^3/hr$, and critical loading rates for individual VOCs in the mixture were different. Specifically, toluene content in the mixture played a major role in the biofilter overall performance. As VOC mixture was fed beyond the critical loading rate, reacclimation of the biofilter to reach the 99% removal efficiency following backwashing was delayed, which was a critical factor in the biofilter performance. In the mass balance analysis, 63.8% of the carbon equivalent in VOCs removal was used for $CO_2$ production during the experimental runs. The 82.6% nitrogen utilized in the biofilter was contributed to microbial cell synthesis. The obtained results were compared against consistently high efficient performance of TBAB for VOC mixture by employing backwashing as biomass control.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.2
• /
• pp.140-146
• /
• 1999

When methanol was the sole carbon source, Methylobacterium organophilum NCIB 11278, a facultative methylotroph, accumulated Poly-$\beta$-hydroxybutyrate (PHB) as 59% (w/w) of dry cell weight under potassium limitation, 37% under sulfate limitation, and 33% under nitrogen limitation. Based on a stoichiometric analysis of PHB synthesis from methanol, it was suspected that PHB synthesis is accompanied by the overproduction of energy, either 6-10 ATP and 1 $FADH_2$ or 6 ATP and 3 NADPH to balance the NADH requirement, per PHB monomer. This was confirmed by observation of increased intracellular ATP levels during PHB accumulation. The intracellular ATP with limited potassium, sulfate, and ammonium increased to 0.185, 0.452, and 0.390 $\mu$moles ATP/g Xr (residual cell mass) during PHB accumulation, respectively. The intracellular ATP level under potassium limitation was similar to that when there was no nutrient limitation and no PHB accumulation, 0.152- 0.186 $\mu$moles ATP/g Xr. We propose that the maximum PHB accumulation observed when potassium was limited is a result of the energy balance during PHB accumulation. Microorganisms have high energy requirements under potassium limitation. Enhanced PHB accumulation, in ammonium and sulfate limited conditions with the addition of 2,4-dinitrophenol, which dissipates surplus energy, proves this assumption. With the addition of 1 mM of 2,4-dinitrophenol, the PHB content increased from 32.4% to 58.5% of dry cell weight when nitrogen limited and from 15.1 % to 31.0% of dry cell weight when sulfate limited.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.551-559
• /
• 2005

The recent rapid increase in genomic data related to many microorganisms and the development of computational tools to accurately analyze large amounts of data have enabled us to design several kinds of simulation approaches for the complex behaviors of cells. Among these approaches, dFBA (dynamic flux balance analysis), which utilizes FBA, differential equations, and regulatory events, has correctly predicted cellular behaviors under given environmental conditions. However, until now, dFBA has centered on substrate concentration, cell growth, and gene on/off, but a detailed hierarchical structure of a regulatory network has not been taken into account. The use of Boolean rules for regulatory events in dFBA has limited the representation of interactions between specific regulatory proteins and genes and the whole transcriptional regulation mechanism with environmental change. In this paper, we adopted the operon as the basic structure, constructed a hierarchical structure for a regulatory network with defined fundamental symbols, and introduced a weight between symbols in order to solve the above problems. Finally, the total control mechanism of regulatory elements (operons, genes, effectors, etc.) with time was simulated through the linkage of dFBA with regulatory network modeling. The lac operon, trp operon, and tna operon in the central metabolic network of E. coli were chosen as the basic models for control patterns. The suggested modeling method in this study can be adopted as a basic framework to describe other transcriptional regulations, and provide biologists and engineers with useful information on transcriptional regulation mechanisms under extracellular environmental change.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.915-921
• /
• 2008

In most PEM fuel cell research, effects of cell geometry, physical properties of component such as membrane, carbon cloth, catalyst, etc. and water transport phenomena are key issues. The scope of these research was limited to single cell and stack except BOP(Balance of plant) of fuel cell. The research fouced on the fuel cell system usually neglect to consider detailed transport phenomena in the cell. The research of the fuel cell system was interested in a system performance and system dynamics. In this paper, the effect of the anode recirculation is calculated using the 2D steady-state model. For this work, 2D steady-state modeling and experiments are performed. For convenience of modifying of model equation, not commercial pakage but the in-house algorithm was used in simulation. For an vehicle industry, the analysis of the anode recirculation system helps the optimization of operating condition of the fuel cell.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1997

The variation of the mechanical properties and the formation of retained austenite with heat treatment conditions in austempered Si bearing carbon steels has been investigated. In the case of a steel containing 0.35C-1.48Si-0.95Mn, it has been found that a feather shape bainite structure of lath are obtained under a isothermal treated condition at just below the Ms temperature, and the martensite, bainitic ferrite and retained austenite of second phase particles on the ferrite matrix for a isothermal treated steels after intercritical annealing are precipitated in a linked shape. The retained austenite with $2{\mu}m$ size induced as TRIP is found to increase with increasing the formation rate of retained austenite for the intercritical annealing and high Si containing steels. The tensile strength is increased as austempering temperature increases in all isothermal treatment temperature, whereas the elongation is shown to roughly decrease as the tensile strength increases. The values of tensile strength-elongation balance have showed a marked dependence upon the elongation rather than the tensile stregth, and their values are increased for high Si containing steels and intercritical annealing condition. The most optimum result has been shown to be the tensile stregth-elongation balance of $2882.4kgf/mm^2.%$ and the elongation of 33.3% for a "B" steel in the heat treating temperature range of $780{\sim}370^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.471-471
• /
• 2017

최근 기상 이변으로 인해 홍수, 가뭄 등과 같은 수재해가 빈번히 발생되고 있다. 이에 수재해예방 등의 안전 기술과 관련된 관심이 증가되고 있다. 수재해 예방을 위해서는 먼저 홍수, 가뭄 등과 같은 수재해 감시가 필요하며, 이를 위해 위성, 레이더 등으로 관측된 자료를 활용한 수문인자 정보는 매우 중요하다. 미국 NASA의 LIS(Land Information System)는 위성 및 지상관측 자료를 활용하여 홍수, 가뭄, 기상, 산사태, 농업 등의 정보를 생산할 수 있는 프레임워크이다. LIS는 크게 지표면 모델 및 자료동화를 위한 변수들의 전처리 과정(LDT), 지표면 모델을 활용한 분석 및 자료동화 과정(LDAS) 및 분석된 자료의 검보정(LVT) 과정으로 구성되어 있다. LIS에서 산출 가능한 인자는 Energy Balance, Water Balance, Surface/Subsurface State, Evaporation, Hydrologic, Cold Season Processes, Compared Data, Carbon 등 9개로 분류되며 약 78개의 인자를 산출한다. 홍수, 가뭄 등과 같은 수재해 감시를 위한 수문인자는 강수량, 증발산량, 토양수분, 지표면 온도 등을 비롯한 여러 가지 인자들이 필요하다. LIS는 주로 미국, 캐나다 등 평활한 지역에 활용되어 공간해상도는 약 10km(0.1deg) 이하로 자료를 산출한다. 산악 지형이 대부분인 한국 지형에 적용하기에는 자료의 정확성이 낮아 10km 이상의 공간해상도 자료가 필요하며, 한국형 수재해정보 플랫폼에서 홍수, 가뭄 등의 기초자료로 사용하기 위한 수문인자의 선정이 필요하다. 이에 본 연구에서 NASA LIS를 통해 산출 가능한 인자를 정리하고 한국형 수재해 정보플랫폼에 활용 가능한 수문인자의 항목을 조사하였다. 홍수, 가뭄 등 수재해 분석에 필요한 기초자료는 강우량, 유출량, 잠재적 증발산량, 식생의 증산량, 토양수분, 표면온도, 알베도 등의 수문인자이며, NASA LIS에서 이와 같은 수문인자 산출이 가능하다. NASA와 국제공동 연구중인 한국형 물순환분석 프레임워크(K-LIS(안)) 개발을 통해 한국 지형에 적합한 홍수 및 가뭄 등의 수재해 감시 평가 예측이 가능할 것이며, K-LIS에서 산출되는 고해상도의 수문인자들을 수재해 정보 웹 포털의 정보 제공 서비스를 통하여 손쉽게 접근 가능할 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.263-270
• /
• 2004

A repeated $4{\times}4$ Latin square design was conducted with eight ileal cannulated castrates to examine the effect of source of starch and fiber on nutrient balance and energy metabolism. Pigs were fed on one of the four experimental diets: Control diet (C) mainly based on cooked rice; and diets P, S and W with the inclusion of either raw potato starch, sugar beet pulp or wheat bran supplementation, respectively. With the exception of an increased (p<0.05) energy loss from methane production with diet S observed, no significant differences (p>0.05) in the ratio of metabolizable energy (ME)/digestible energy, the utilization of ME for fat deposition and for protein deposition, energy loss as hydrogen and urinary energy were found between diets. The efficiency of utilization of ME for maintenance was lower (p<0.05) with diets P and S than with diet C. The inclusion of fiber sources (sugar beet pulp or wheat bran) or potato starch reduced the maintenance energy requirement. The fecal energy excretion was increased (p<0.05) with either sugar beet pulp or wheat bran supplementation, while it was unaffected (p>0.05) by addition of potato starch. In comparison with diets C and P, a lowered ileal or fecal digestibility of energy with diets S and W was observed (p<0.05). Feeding sugar beet pulp caused increased (p<0.05) daily production of methane and carbon dioxide and consequently increased energy losses from methane and carbon dioxide production, while it did not influence the daily hydrogen production (p>0.05). An increased (p<0.05) proportion of NSP excreted in feces was seen by the supplementation of wheat bran. Higher NSP intake caused an increased daily amount of NSP in the ileum, but the ileal NSP proportion as a percentage of NSP intake was unaffected by diets. Feeding potato starch resulted in increased daily amount of starch measured in the ileum and the proportion of ileal starch as a percentage of starch intake, while no significant influence on fecal starch was found. Higher (p<0.05) daily amount of fecal starch and the proportion of fecal starch as a percentage of starch intake were found with fiber sources supplementation compared with diets C and P. By increasing the dietary NSP content the fecal amount of starch increased (p<0.01).