• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2439-2442
• /
• 2012

In order to explore the effects of the solvent on the formation rate of polyynes, we investigated the absorption spectra of polyynes obtained by laser ablation of a graphite target in different solvents at 1064 nm. Polyynes so produced were confirmed by the Raman band around $2200cm^{-1}$ which corresponds to the carbon triple bonds. The production of polyynes by laser ablation turned out to be significantly affected by the ratio of the hydrogen and carbon atoms in the solvent molecule. No clear correlations were observed in the formation of polyynes for other properties of the solvent such bond dissociation energy, thermal conductivity, and total mass of hydrogen atoms per volume of solvent.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.111-112
• /
• 2017

Radon has been considered the greatest source of exposure within the total radiation exposure of the human body. xposure from radon, which exists in indoor air quality, lacks public perception, Radon, which exists anywhere on earth, is not regarded as a state of attention even if it is above the average level. Indoor radon exposure situations are not intentionally introduced, and essentially the attention and responsibilities of radon exposures are assumed to be in indoor occupants. So, these are caused by common uranium and thorium scattering on Earth, and are brought into the building by fine cracks or exposed indicators of the buildings. Therefore, this study aims to reduce the risk of radon rays and reduce radon, which induces diseases caused by breathing in the body of indoor air pollutants and emitting diseases by emitting alpha rays from the radon gas.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.34-37
• /
• 2008

The composite materials are widely used in the many applications of industry as well as aerospace field because of their high specific stiffness and strength which benefits the material and provides potential energy savings. However, composite materials also have a low property about external applied impact. In this paper, impact tests were conducted on different sample types(glass, carbon and kevlar composite) to obtain information such as absorbed energy and composite deformation using an instrumented impact test machine (DYNATUP 8250). 3 type samples were compared to experimental results. The data from impact test provided valuable information between the different type samples by wet lay up. This paper shows results of that kevlar composite has larger absorption energy and deformation than others.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.287-298
• /
• 2001

Change in light transmission characteristics caused by various types of oil contaminations was experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon dust, two kinds of solutions and grease were used for the lest contaminants in this work. Light intensity of the transmitted light was treasured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and polymeric fibers mainly due to the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change iii lubricating oils.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3748-3758
• /
• 1996

This study is to investigate experimentally relationships between the impact energy and moisture absorption characteristies vs.the residual bending strength with the variation of stacking seqences. When Carbon-fiber reinforced plastics(CFRP) impact-induced laminates are subjected to the high temperatures and hygrothermal effects, it is found that what CFRP laminates are impacted by a steel ball (5 mm in diametar) ; thus, the generated delamination is observed by the ultrasonic microscope. And the residual bending strength is evaluated by a three-point bending test. Also, a thermostat is used in test with the unimpacted and impacted specimens for the moisture experimentaiton. The percision electro lever scles is used to measure the moisture content(1/10, 000g).

• Bulletin of the Korean Chemical Society
• /
• 제10권5호
• /
• pp.422-426
• /
• 1989

Triethylsilyl radical was generated by laser flash photolysis of a 1:1 (v/v)solution of triethylsliance and di-tert-butyl peroxide. The silicon centered radical was reacted with sulfides to give carbon centered radicals by displacement at sulfar. The carbon radicals were readily detected by their transient absorption spectra. The absolute rate of reaction of triethylsilyl radical with 9-fluorenylphenylsulfide, di-n-butylsulfide, di-sec-butyl, di-tert-butyl sulfide and di-n-butyl disulfide are $2.40{\pm}0.12{\times}10^8M^{-1}s^{-1}$, $11.21{\pm}0.89{\times}10^6M^{-1}s^{-1}$, $8.79{\pm}0.73{\times}10^6M^{-1}s^{-1}$, $3.29{\pm}0.18{\times}10^6M^{-1}s^{-1}$, and $3.41{\pm}0.09{\times}10^8M^{-1}s^{-1}$, respectively.

• Korean Chemical Engineering Research
• /
• 제48권2호
• /
• pp.253-258
• /
• 2010

암모니아수를 이용한 이산화탄소 흡수분리공정에서 흡수액의 재생조건(온도, 압력)이 이산화탄소 흡수성능에 미치는 영향을 조사하였다. 실험에 사용된 흡수액은 탄산암모늄($(NH_4)_2CO_3$)을 물에 용해시키어 $CO_2$ 로딩($mol\;CO_2/mol\;NH_3$)이 0.5, 용액 내의 암모니아수 농도가 14, 20, 26 및 32 wt%로 되도록 제조하였고, 이산화탄소의 흡수에 앞서 재생압력(6~18 bar)을 조절하면서 $120{\sim}160^{\circ}C$의 온도범위로 제조된 흡수액을 가열하여 재생하였다. 재생된 흡수액을 기포 반응기에 넣고 12 vol%의 $CO_2$를 함유한 기체를 주입하여 흡수반응을 수행하였다. 실험결과 26 wt%의 암모니아수가 대체적으로 $CO_2$ 흡수량이 높았으며, 특히 재생온도가 $150^{\circ}C$, 재생압력이 14 bar일 때의 $CO_2$ 흡수량은 본 연구의 실험조건에서 $45ml\;CO_2/g$ solution으로 가장 높은 값을 보였다. 적정을 통해 재생된 용액을 분석한 결과 재생압력이 높아질수록 암모니아 손실량은 감소하고, 재생온도가 높아질수록 암모니아 손실량이 증가하였다. 또한 암모니아 농도증가에 따라 암모니아 손실량이 비례적으로 증가하였다. Electrolyte NRTL 모델을 사용하여 Aspen Plus에 적용한 결과 실험 데이터와 거의 일치함을 보였다.

• 한국입자에어로졸학회지
• /
• 제17권4호
• /
• pp.91-106
• /
• 2021

Daily PM_2.5 was collected during summer period in 2020 in Gwangju to investigate its chemical and light absorption properties. In addition, real-time light absorption coefficients were observed using a dual-spot 7-wavelength aethalometer. During the study period, SO₄^2- was the most important contributor to PM_2.5, accounting for on average 33% (10-64%) of PM_2.5. The chemical form of SO₄^2- was appeared to be combination of 70% (NH₄)₂SO₄ and 30% NH₄HSO₄. Concentration-weighted trajectory (CWT) analysis indicated that SO₄^2- particles were dominated by local pollution, rather than regional transport from China. A combination of aethalometer-based and water-extracted brown carbon (BrC) absorption indicated that light absorption of BrC due to aerosol particles was 1.6 times higher than that due to water-soluble BrC, but the opposite result was found in absorption Ångström exponent (AAE) values. Lower AAE value by aerosol BrC particles was due to the light absorption of aerosol BrC by both water-soluble and insoluble organic aerosols. The BrC light absorption was also influenced by both primary sources (e.g., traffic and biomass burning emissions) and secondary organic aerosol formation. Finally the ATR-FTIR analysis confirmed the presence of NH₄⁺, C-H groups, SO₄^2-, and HSO₄^2-. The presence of HSO₄^2- supports the result of the estimated composition ratio of inorganic sulfate ((NH₄)₂SO₄) and bisulfate (NH₄HSO₄).

• 한국환경생태학회지
• /
• 제30권2호
• /
• pp.243-252
• /
• 2016

충남 서산에 위치한 금강산 내 신갈나무림과 소나무림의 유기탄소 흡수량의 비교를 위해 2013년 9월부터 2014년 8월까지 지상부와 지하부 생물량, 낙엽생산량, 낙엽층의 낙엽량, 그리고 토양의 유기탄소 분포량, 토양호흡량을 측정하였다. 지상부와 지하부 생물량에 분포하고 있는 유기탄소의 양은 신갈나무림과 소나무림에서 각각 115.07/34.36, $28.77/8.59ton\;C\;ha^{-1}$이었으며, 임상낙엽층에 각각 4.89, $6.02ton\;C\;ha^{-1}$, 토양층에 각각 132.78, $59.72ton\;C\;ha^{-1}$ 50cm-depth가 분포하여 신갈나무림과 소나무림의 전체 유기탄소량은 281.52, $108.69ton\;C\;ha^{-1}$으로 나타났다. 본 조사지소 신갈나무림과 소나무림에서 연간 광합성을 통하여 식물체에 고정된 유기탄소량은 각각 10.64, $3.64ton\;C\;ha^{-1}$이었으며, 낙엽생산을 통해 임상으로 유입되는 유기탄소량은 신갈나무림과 소나무림에서 각각 2.83, $2.20ton\;C\;ha^{-1}$ 으로 나타났다. 토양호흡을 통하여 방출되는 유기탄소량은 신갈나무림과 소나무림에서 각각 9.77, $5.54ton\;C\;ha^{-1}$ 이었으며, 유기탄소 순생산량과 미생물호흡량의 차이로 추정했을 때 본 신갈나무림과 소나무림에서 연간 대기로부터 순 흡수하는 유기탄소는 3.90, $0.81ton\;C\;ha^{-1}yr^{-1}$ 로 나타나 신갈나무림의 유기탄소 흡수량이 소나무림에 비해 현저히 높은 것으로 나타났다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.490-493
• /
• 2003

Enzymatic synthesis of sugar fatty acid esters was investigated in organic solvent using Candida rugosa lipase. To overcome sugars insolubility in organic solvent, sugar absorption procedure was done on a silica gel. The product yield was determined by using ion Chromatography, with various factors such as reaction time, enzyme fatty acid molar ratio, number of carbon in fatty acid.