• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1816-1821
• /
• 2003

The thermoelectric device was applied to a car-seat to control the hot temperature in summer and cold temperature in the winter. The characteristics of the device used to a car-seat were analyzed. The air conditioning structure was designed to regulate the hot side of the thermoelectric device. To control the temperature of the car-seat, a robust control algorithm based on the sliding mode control was applied, and a controller using one-chip microprocessor was developed. The performance of the proposed controller through experiments was shown.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.518-525
• /
• 2004

The thermoelectric device was applied to a car seat to control the hot temperature in the summer and cold temperature in the winter. The characteristics of the device used to a car seat were analyzed. The air conditioning structure was designed to regulate the hot side of the thermoelectric device. To control the temperature of the car seat, a robust control algorithm based on the sliding mode control was applied, and a controller using one-chip microprocessor was developed. The performance of the proposed controller through experiments was shown.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1553-1558
• /
• 2007

This paper presents a vision based autonomous inspection system for welding quality control of car sinking seat. In order to overcome the precision error that arises from a visible inspection by operator in the manufacturing process of a car sinking seat, this paper proposes the MVWQC (machine vision based welding quality control) system. This system consists of the CMOS camera and NI machine vision system. The image processing software for the system has been developed using the NI vision builder system. The geometry of welding bead, which is the welding quality criteria, is measured by using the captured image with median filter applied on it. Experiments have been performed to verify the proposed MVWQC of car sinking seat.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.110-121
• /
• 2011

As car seat is the closest part between driver and rider, the interest of the security and comfort of the seat is increasing. This research discovered the best condition for dyeing and finishing to produce a fabric for car seat and also developed the design of fabrication to give the feeling from such a finishing. The best condition of coating finishing solution is aqueous PU 65%, dye resist reagent 20%, water 12%, thicker 3%, and knife thickness 2mm, tenter temperature $170^{\circ}C$, tenter speed 35yard/min, viscosity 12,000cps and stirring time 100kg * 30min. According to the processing time of knife coating upon stirring the change of resin and the uneven of coating quantity was shown. This problems will be solved by means of automatic temperature control apparatus for resin and sealing device through a coming research.

• 감성과학
• /
• 제17권1호
• /
• pp.29-38
• /
• 2014

In recent days, according as ergonomics and aesthetic engineering are important factors in the product market, there is a demand to develop automobile seat and interior designs which are focused on sensitive elements such as aesthetic and comfort features in order to satisfy the sensitive needs of consumers. To meet such demands, car seats are turning into functional and sensitive products that reflect elements of function and entertainment. According to such trends, this research is aimed to develop the illuminating car seat fabric that serve such functions as recognizing and reacting to car environments, which includes sensing over-speed, open doors, and unfastened safety belts through the illuminating car seat fabrics by optical fiber. For this purpose, basic physical properties of optical fiber are analyzed, appropriate weaving and etching technologies are applied, and the woven fabric of optical fiber for car seats are illuminating depend upon car environments. Moreover, the applicable woven fabric of optical fiber is deduced after evaluating the physical properties (such as tensile strength, heatproof, anti-fouling, washable and combustible traits) for the appropriateness of applying the woven fabric of optical fiber to car seats. For this purpose, the woven fabric of optical fiber is covered according to car seat processes; the optical fiber applied to seats is composed that it may be connected to one end of the connector linked to a LED so that it may perform functions like sensing over-speed, open doors, and unfastened safety belts; the sensed signals are transmitted to the control part, and luminescent signals are transmitted to LED.

• 대한전자공학회논문지TC
• /
• 제43권9호
• /
• pp.135-141
• /
• 2006

교통사고를 예방하기 위해서는 시트조정을 통해서 운전자의 시야를 확보하고, 운전자가 뒤에 오는 자동차를 알아 볼 수 있도록 룸미러의 위치를 조정하는 것이 매우 중요하다. 본 논문에서는 이러한 문제점을 해결하기 위해서, 안전하고 편리한 차량을 목표로 운전자가 차량에 앉게 되면, 자동으로 시트를 조정하여 운전자의 시야를 확보 할 수 있도록 한다. 또한 백미러를 자동 조정해서, 운전자가 안전운전에 도움이 될 수 있는 자동차 시트 자동 조정 알고리즘을 개발하였다. 특히, 교통사고 발생해서, 에어백이 작동 할 때에 본 논문에서는,승객의 몸무게에 따라서 충격완화를 위한 시트 자동조정 알고리즘을 기능을 추가하였다. 뿐만 아니라, 본 논문에서는, 교통사고 발생 시 운전자가 위험지역을 통과할 때 위험지역임을 운전자에게 통지하여 안전한 운전이 되도록 하는 알고리즘을 개발하였으며, 유비쿼터스 환경에서 모의실험을 하였다. 모의실험 결과 지능을 이용한 교통사고 분석 방식이기존의 방식보다 25% 이상 교통사고를 줄일 수 있음을 확인하였다

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.160-171
• /
• 1999

The paper examines the ride performance enhancement that can be obtained by applying hydraulic semiactive vibration absorbers(SAVa) to alter the compliance characteristics of the seat/wheel suspension system. The work relies on a consistent model of the (nonlinear) hydrodynamics of the SAVA. A recently developed Lyapunov control scheme is used to provide regulation.. The performance is first examined assuming a quarter car with a seat/seat mounted mass. The paper then employs a quarter car/seat with a two mass ISO model of the seated human . The simulated results indicated that a reduction of 45% of the peak vertical acceleration is achievable with new system.

• 디지털콘텐츠학회 논문지
• /
• 제10권1호
• /
• pp.121-127
• /
• 2009

자동차 ECU(Electronic Control Unit)는 날이 갈수록 더욱 복잡해지고 많은 기능을 요구하고 있다. 대표적으로 power windows switch, LCM(Light Control Module), mirror control system, seat memory등 운전자 편의 시스템이 개발되어 양산 중에 있다. 또한 현재 업계에서 많은 연구개발이 진행되고 있는 운전자 편의를 위한 DIS(Driver Information System)도 있다. 하지만 이러한 시스템을 운전 중 조작하게 되면 많은 위험이 따른다. 따라서 본 논문에서는 이러한 자동차 편의장치를 음성으로 조작 가능한 음성인식 시스템을 구현하였으며 자동차 잡음환경에서 인식률 향상을 위한 전처리 필터를 적용하여 양호한 인식결과 얻었다.

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.45-50
• /
• 2013

The whiplash Injuries due to rear collision occur frequently. As result, in many countries, seat performance is being assessed and developed to improve head whiplash injury in rear collision of passenger car. This study compares whiplash assessment methods in each country. Using the DFSS(Design for Six Sigma) method, the correlation between influence parameters of head restraints and whiplash injury criteria is analyzed. Four control factors are used in this study. And total 11 whiplash injury criteria from NCAP(New Car Assessment Program) of Korea, Europe, China and IIHS(Insurance Institute for Highway Safety) of USA are used for output response. By the experimental design, L9 orthogonal coordinate system is configured and is tested by sled test equipment, twice. By using average assay value and ANOVA, the correlation between control factors and injury criteria has been comprehended. Optimization design of head restraint according the regional seat safety assessment was derived through the correlation.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.203-209
• /
• 2014

The rear center-hinge bracket is designed for supporting and folding the rear-seat backrest. This bracket needs to be strong enough to be able to rigidly hold the rear-seat backrest and to withstand luggage loads from the car trunk that are generated when a vehicle is driving on the roads. Particularly, current accident studies report that many serious occupant injuries occurred when the rear-seat back easily folded inward toward the car interior, driven by the luggage loads in the trunk. Given this fact, the robust design of the rear center-hinge bracket that mainly supports the rear backrest has become more important for providing customer safety and preventing high warranty and durability problems. However, none of the studies have emphasized its significant role and considered its robust optimization. Therefore, this paper presents how the hinge-bracket design is optimized based on an application of the finite-element method coupled with the parameter design using Taguchi's design experiment. Finally, Taguchi method's application optimizes a robust center-hinge bracket that shows more rigid performance although it has lighter weight and thinner thickness.